LG 49UK6300BUB (01) PDF Document

When using your LG 49UK6300BUB TV, please follow these essential safety instructions:

• Read and keep these instructions.

• Heed all warnings and follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.

To ensure safety and prevent product damage to your LG 49UK6300BUB TV, do not place the TV and/or remote control in the following environments:

• Keep the product away from direct sunlight.

• An area with high humidity, such as a bathroom.

• Near any heat source, such as stoves and other devices that produce heat.

• Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

• An area exposed to rain or wind.

• Do not expose to dripping or splashing, and do not place objects filled with liquids (vases, cups, etc.) on or over the apparatus.

• Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not install in excessively dusty places.

Failure to follow these guidelines may result in fire, electric shock, combustion/explosion, malfunction, or product deformation. Also, to prevent the spread of fire, keep candles or other items with open flames away from the product at all times.

Proper ventilation is crucial for your LG 49UK6300BUB TV. Follow these guidelines:

• Install your TV where there is proper ventilation. Do not install it in a confined space such as a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

When mounting on a table or wall, ensure there is a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

To ensure safe operation of your LG 49UK6300BUB TV, handle the power cord with care:

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

Unplug your LG 49UK6300BUB TV immediately and contact your local customer service if any of the following occur:

• The product has been damaged.

• Water or another substance enters the product (like an AC adapter, power cord, or TV).

• You smell smoke or other odors coming from the TV.

• During lightning storms or when the TV is unused for long periods of time.

Even if the TV is turned off by remote control or button, the AC power source is still connected to the unit if not unplugged.

Please observe the following safety measures for the batteries of your LG 49UK6300BUB remote control:

• Store the accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

• Do not mix new batteries with old batteries, as this may cause them to overheat and leak.

• Failure to match the correct polarities of the battery may cause it to burst or leak, resulting in fire, personal injury, or ambient pollution.

When moving your LG 49UK6300BUB TV, please follow these instructions:

• Before moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs.

• It is recommended to move the TV in the box or packing material that it originally came in.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grille area.

• When transporting the TV by hand, hold it as shown in the illustrations provided in the manual.

• Do not press or put stress on the front panel of the TV.

• Keep the TV upright; never turn it on its side or tilt it towards the left or right.

• Do not expose the TV to jolts or excessive vibration.

• Avoid touching the screen at all times, as this may damage it.

• Be careful not to damage the protruding buttons.

To clean your LG 49UK6300BUB TV safely, follow these steps:

• Unplug the power cord before cleaning.

• Wipe gently with a soft, dry cloth.

• Do not spray water or other liquids directly on the TV.

• Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., as these can damage the product and/or its panel.

• When cleaning, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left, or right side of the panel and the guide panel.

• Make sure to wring any excess water or cleaner from the cloth.

• Spray just enough water or cleaner onto a dry cloth to wipe the screen.

For an optimal connection with your LG 49UK6300BUB TV, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) wide. If a USB cable or flash drive does not fit into your TV’s USB port, use an extension cable that supports USB 2.0. It is recommended to use a certified cable with the HDMI logo attached, and the recommended cable types are High-Speed HDMI®/™ cable or High-Speed HDMI®/™ cable with Ethernet, with a length of 3 m (9.84 feet) or less.

The wall mounting specifications for the LG 49UK6300BUB TV are as follows:

Make sure to use screws and a wall mount bracket that meet the VESA standard. Consult your local dealer for a wall mount that supports the VESA standard used by your TV model.

Follow these steps to mount your LG 49UK6300BUB TV on a table:

1. Lift and tilt the TV into its upright position on a table.

2. Ensure there is a minimum of 10 cm (4 inches) of space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

When attaching the stand, place the screen facing down on a cushioned table or flat surface to protect it from scratches.

To prevent your LG 49UK6300BUB TV from tipping over, you can secure it to a wall. Note that brackets, bolts, and ropes are not provided.

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with the bolts to the wall. The location of the wall bracket should match the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Always use a platform or cabinet that is strong and large enough to support the TV securely. Ensure screws are fastened tightly but not with excessive force, as this may strip them.

When wall mounting your LG 49UK6300BUB TV, consider the following:

• An optional wall mount can be used. Consult with your local dealer for a wall mount that supports the VESA standard for your TV model.

• Carefully attach the wall mount bracket to the rear of the TV.

• Install the wall mount bracket on a solid wall perpendicular to the floor. If attaching to other building materials, contact qualified personnel.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• If you intend to mount the product to a wall, attach the VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket, fix it carefully so as not to drop.

• When mounting the TV on the wall, make sure not to install it by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist, as this may damage the product and cause it to fall.

The LG 49UK6300BUB TV supports the following audio formats via HDMI, depending on the model:

• DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz)

• DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz)

• True HD (48 kHz)

• Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz)

• PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

You can operate the basic functions of your LG 49UK6300BUB TV using the single button on the unit.

Basic Functions:

• Power On: Press the button.

• Power Off: Press and hold the button. All running apps will close.

• Menu Control: Press the button when the TV is on to access the menu.

• Menu Selection: Press and hold the button to use a function when you access menu control.

Adjusting the Menu:

When the TV is on, press the button once to bring up the menu. You can then adjust items using the button:

The Magic Remote may be an optional accessory for your LG 49UK6300BUB TV. Check if your TV model supports Bluetooth in the Wireless Module Specification to verify compatibility.

How to register the Magic Remote Control:

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the BACK and HOME buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at the same time.

If you cannot control your LG 49UK6300BUB TV with the remote control, try the following troubleshooting steps:

• Check if anything, such as tape, has been placed over the receiver on the TV.

• Check if there is any obstacle between the TV and the remote control.

• Replace the batteries with new fresh ones.

If your LG 49UK6300BUB TV shows no image and produces no sound, follow these steps:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

If your LG 49UK6300BUB TV turns off unexpectedly, check the following:

• Check the power control settings. The power supply may have been interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

The display of your LG 49UK6300BUB TV is an advanced product with millions of pixels. The following are normal behaviors and do not indicate a malfunction:

• Flicker: If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal.

• Dot Defects: Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. In a very few cases, you could see fine dots. These are deactivated pixels and do not affect the performance or reliability of the TV.

• Image Sticking: Displaying a still image for a prolonged period may cause image sticking or burn-in. Avoid displaying a fixed image on the TV screen for an extended length of time.

The sounds you hear from your LG 49UK6300BUB TV are likely normal operational noises and do not affect the performance or reliability of the product.

• Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate the product. It varies depending upon the product.

The specifications for the LG 49UK6300BUB TV are as follows:

Broadcasting Specifications

Wireless module (LGSBWAC72) Specifications

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.

If your LG 49UK6300BUB TV causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The symbols found on your LG 49UK6300BUB TV have the following meanings:

To ensure proper and safe television placement for your LG 49UK6300BUB TV, please follow these child safety recommendations:

Tune in to Safety

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over, or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled, or grabbed.

Wall or Ceiling Mount Your Television

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).

• ALWAYS follow all instructions supplied by the television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

The model and serial numbers of your LG 49UK6300BUB TV are located on the back and on one side of the TV. It is recommended to record them in case you ever need service.

To control your LG 49UK6300BUB TV’s functions externally with a computer or A/V control system, you can connect to the RS-232C input jack. The type of control port may differ between model series and not all models support this connectivity. Cable is not provided.

Connection Types:

• USB to Serial converter with USB Cable: LG TVs support PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial converters. These can be purchased from computer stores.

• RS-232C With RS232C Cable (D-Sub 9pin Type): You will need to purchase an RS-232C (DE9, D-Sub 9pin female-to-female type) cable.

• Phone Jack Type: For some models, you need to purchase a phone-jack to RS-232 cable.

Set ID Configuration:

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (General → About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number (1-99) and select CLOSE.

5. When you are finished, press EXIT.

The communication parameters for using the RS-232C port on your LG 49UK6300BUB TV are:

• Baud rate: 9600 bps (UART)

• Data length: 8 bits

• Parity: None

• Stop bit: 1 bit

• Communication code: ASCII code

• Use a crossed (reverse) cable.

The protocol for sending and receiving data to your LG 49UK6300BUB TV via RS-232C is structured as follows:

Transmission Structure:

[Command1][Command2][ ][Set ID][ ][Data][Cr]

• [Command 1]: First command to control the TV (j, k, m, or x).

• [Command 2]: Second command to control the TV.

• [Set ID]: The desired monitor ID number from 1 to 99 (Hexadecimal 0x00 to 0x63). If set to ‘0’, every connected set can be controlled.

• [Data]: The command data to transmit (hexadecimal). Transmit ‘FF’ to read the status of a command.

• [Cr]: Carriage Return (ASCII code ‘0x0D’).

• [ ]: Space (ASCII code ‘0x20’).

OK Acknowledgement:

[Command2][ ][Set ID][ ][OK][Data][x]

The TV transmits this response when it receives normal data. If the command was to read data, this response includes the present status data.

Error Acknowledgement:

[Command2][ ][Set ID][ ][NG][Data][x]

The TV transmits this response when it receives abnormal data from non-viable functions or encounters communication errors. Data 00 indicates an Illegal Code.