LG 47LB561U-ZE (01) PDF Document

To attach the stand to your LG 47LB561U-ZE, please follow these steps. Note that the process may vary slightly depending on your specific model series (LB55, LB56, LB62).

1. Place the TV screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2. Align the Stand Base (Part B) with the Stand Base (Part A).

3. Insert the assembled stand into the TV set.

4. Secure the stand to the TV using the provided screws. Depending on the model, you will use either M4 x L14 or M4 x L20 screws. Use all 4 screws (4EA) to ensure the stand is securely fastened.

Connect your LG 47LB561U-ZE to a wall antenna socket using an RF cable (75 Ω). The port is labeled “ANTENNA / CABLE IN”.

Notes:

• If you want to use more than 2 TVs, use a signal splitter.

• If the image quality is poor, install a signal amplifier correctly to improve it.

• If image quality is poor with a connected antenna, try realigning the antenna in the correct direction.

• An antenna cable and converter are not supplied with the TV.

• Supported DTV Audio formats are MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

For satellite models of the LG 47LB561U-ZE, connect the TV to a satellite dish and socket using a satellite RF cable (75 Ω). The port is labeled “LNB Satellite IN”.

The Euro Scart connection transmits video and audio signals from an external device to your LG 47LB561U-ZE. Connect the external device and the TV with a Euro Scart cable. Any Euro Scart cable used must be signal shielded.

The AV1 (TV Out) port will output different signals depending on the current input mode:

The joystick button, located below the TV screen, allows you to operate basic TV functions.

Basic Functions:

• Power On: When the TV is off, press the joystick button once and release it.

• Power Off: When the TV is on, press and hold the joystick button for a few seconds and release. (If the Menu is on screen, this action will exit the menu instead).

• Volume Control: Move the joystick left or right to adjust the volume.

• Programmes Control: Move the joystick up or down to scroll through saved programmes.

Adjusting the Menu:

When the TV is on, press the joystick button once to bring up the menu. You can then move the joystick up, down, left, or right to select an item.

• TV off: Turns the power off.

• Settings: Accesses the main menu.

• Close: Clears on-screen displays and returns to TV viewing.

• Input List: Changes the input source.

To prevent scratches or damage, follow this advice when moving your LG 47LB561U-ZE:

• Always avoid touching the screen.

• It is recommended to move the TV in its original box or packing material.

• Before moving, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, at least two people are required.

• Keep the TV upright during transport; never turn it on its side or tilt it.

• Do not expose the TV to jolts or excessive vibration.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as this may damage the screen.

1. Lift and tilt the TV into its upright position on a stable table.

2. Leave a minimum of 10 cm of space between the TV and the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

Securing the TV to a Wall (Optional):

This feature helps prevent the TV from being pulled over. Note that brackets, bolts, and ropes are not provided.

1. Insert and tighten eye-bolts (or TV brackets and bolts) on the back of the TV. If there are already bolts in the eye-bolt positions, remove them first.

2. Mount wall brackets with bolts to the wall, matching the location of the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Ensure the rope is kept horizontal with the flat surface.

LG recommends that wall mounting be performed by a qualified professional installer. You must use screws and a wall mount bracket that meet the VESA standard.

1. Disconnect the power first.

2. Attach an optional wall mount bracket to the rear of the TV.

3. Install the wall mount bracket on a solid wall perpendicular to the floor.

Important Cautions:

• Do not over-tighten the screws, as this may cause damage and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Damages from misuse or an improper accessory are not covered by the warranty.

• The length of screws may differ depending on the wall mount. Use the proper length.

VESA Standards for LG 47LB561U-ZE models:

Below is a list of functions for the remote control buttons. Note that button layout may differ slightly between LB55/LB56 and LB62 models.

You can adjust the picture settings through the SETTINGS menu.

• Picture Wizard III: (SETTINGS → PICTURE → Picture Wizard III) Calibrates and adjusts for optimum picture quality without expensive devices.

• Picture Mode: (SETTINGS → PICTURE → Picture Mode) Select a preset mode optimized for your viewing environment.

– Vivid: Heightens contrast, brightness, and sharpness.

– Standard: Displays images in standard levels of contrast, brightness, and sharpness.

– Eco/APS: Reduces power consumption.

– Cinema/Game: Displays the optimum picture for movies or games.

– Sports: Optimizes for high-action scenes by emphasizing primary colors like white, grass, or sky blue.

– Expert 1, 2: Menu for ISF-certified professionals to fine-tune picture quality.

• Advanced Control / Expert Control: (SETTINGS → PICTURE → Picture Mode → Advanced Control / Expert Control) Calibrates the screen for each picture mode with options like Dynamic Contrast, Dynamic Colour, Gamma, Colour Gamut, Edge Enhancer, and a full Colour Management System.

• Picture Option: (SETTINGS → PICTURE → Picture Mode → Picture Option) Adjusts detailed settings like Noise Reduction, MPEG Noise Reduction, Black Level, and Real Cinema.

• TruMotion: (SETTINGS → PICTURE → TruMotion) Corrects images to display smoother motion sequences with Smooth, Clear, and User settings.

You can manage audio output through the SETTINGS menu.

• TV Speaker: (SETTINGS → AUDIO → Sound Out → TV Speaker) Sound is output through the TV’s internal speakers.

• External Speaker (Optical): (SETTINGS → AUDIO → Sound Out → External Speaker (Optical)) Sound is output through the speaker connected to the optical port. SimpLink is supported.

• LG Sound Sync (Optical): (SETTINGS → AUDIO → Sound Out → LG Sound Sync (Optical)) Connect an LG audio device for rich, powerful sound.

• Headphone: (SETTINGS → AUDIO → Sound Out → Headphone) Sound is output through the headphone port.

• AV Sync. Adjust: (SETTINGS → AUDIO → AV Sync. Adjust) Synchronizes video and audio if they do not match. You can adjust the sound output (TV speakers or SPDIF) to the screen image.

• Digital Sound Out: (SETTINGS → AUDIO → Sound Out → External Speaker (Optical) → Digital Sound Out) Sets up the digital sound output format (Auto or PCM).

SIMPLINK allows you to control various multimedia devices connected via HDMI with your TV remote.

1. Connect the TV’s HDMI IN terminal to the SIMPLINK device’s HDMI output terminal using a high-speed HDMI® cable (with CEC feature).

2. Select INPUT(OPTION) → SIMPLINK.

3. In the SIMPLINK Setting window, set the SIMPLINK function to ON.

4. In the SIMPLINK menu window, select the device you want to control.

SIMPLINK Functions:

• Direct Play: Plays the multimedia device on the TV instantly.

• Select multimedia device: Selects the desired device to control it from the TV screen.

• Disc playback: Manages the device with the TV remote control.

• Power off all devices: When you power off the TV, all connected devices are turned off.

• Sync Power on: When the connected equipment starts to play, the TV will automatically turn on.

• Speaker: Selects the speaker output (home theatre unit or TV).

To set or change the TV password, go to SETTINGS → LOCK → Set Password. The initial password is set to ‘0000’.

To perform a factory reset, go to SETTINGS → OPTION → Factory Reset. This will delete all stored information and reset the TV settings. The TV will turn itself off and back on to complete the process. Do not turn off the power during initialization.

• Use only USB storage devices formatted with the FAT32 or NTFS file system.

• It is recommended to use USB memory sticks of 32 GB or less and USB HDDs of 1 TB or less.

• For external USB HDDs, it is recommended to use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA.

• If a USB HDD with a power-saving function does not work, turn the power off and on.

• Data on the USB storage device can be damaged, so be sure to back up important files. Data maintenance is the user’s responsibility.

• To remove a USB device, select it in Q.MENU → USB Device, and wait for the message confirming it is safe to remove.

Clean your TV regularly to keep it in the best condition and extend its lifespan.

1. Make sure to turn the power off and disconnect the power cord and all other cables first.

2. For the screen, frame, cabinet, and stand:

• To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

• To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent, then wipe immediately with a dry cloth.

3. For the power cord: Remove accumulated dust or dirt from the power cord regularly.

CAUTION:

• Avoid touching the screen at all times, as this may result in damage.

• Do not push, rub, or hit the screen with your fingernail or a sharp object.

• Do not use any chemicals (glass cleaner, abrasives, benzene, alcohol, etc.) as this may damage the product.

• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Here are solutions to common problems with your LG 47LB561U-ZE: