LG 43UN7300PUC (02) PDF Document

To ensure safety while using your LG 43UN7300PUC, please adhere to the following guidelines:

Do not install the TV in a confined space such as a bookcase. Ensure proper ventilation.

Do not place the product on a carpet or cushion.

Do not block or cover the product with cloth or other materials while the unit is plugged in.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.

Do not move the TV whilst the power cord is plugged in.

Do not use a damaged or loosely fitting power cord.

Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

In case of an emergency, the power plug must remain readily accessible as it is the disconnecting device.

Do not let children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.

If an outdoor antenna is installed, follow these precautions:

An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size:

It is recommended to move the TV in the box or packing material that the TV originally came in.

Before moving or lifting the TV, disconnect the power cord and all cables.

When holding the TV, the screen should face away from you to avoid damage.

Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

Use at least two people to move the TV.

When transporting the TV by hand, hold the TV upright; never turn the TV on its side or tilt towards the left or right.

When handling the TV, be careful not to damage the protruding buttons.

Avoid touching the screen at all times, as this may result in damage to the screen.

Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts inserted at the eye-bolts position, remove the bolts first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Use a platform or cabinet that is strong and large enough to support the TV securely.

Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table:

Connect an antenna, cable, or cable box to watch TV while referring to the following:

Make sure not to bend the copper wire of the RF cable.

Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

Use a signal splitter to use 2 TVs or more.

When connecting the HDMI cable, the product and external devices should be turned off and unplugged.

For settings regarding HDMI Ultra HD Deep Color:

Go to [Picture] -> [Additional Settings] -> [HDMI Ultra HD Deep Color]

On: Support 4K @ 50 / 60 Hz (4:4:4, 4:2:2, 4:2:0)

Off: Support 4K @ 50 / 60 Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Color] setting to off.

You can simply operate the TV functions using the button located on the TV.

Power On: Press the button.

Power Off: Press and Hold the button.

Menu Control: Press the button while the TV is on.

Menu Selection: Press and Hold the button while in the menu.

When the TV is turned on, press the button one time to access the menu. You can adjust the following items using the button:

Power Icon: Turns the power off.

Input Icon: Changes the input source.

+/- Icon: Adjusts the volume level.

Up/Down Icon: Scrolls through the saved channels.

POWER: Turns the TV on or off.

TV: Returns to the last TV channel.

SEARCH (Magnifying Glass): Check for recommended content.

CC/SUB: Activates or deactivates the subtitles.

Q. Settings (Gear): Accesses the Quick Settings.

INPUT (Plug): Changes the input source.

Number buttons: Enters numbers.

9**: Accesses the [Quick Help].

– (DASH): Inserts a — between numbers such as 2-1 and 2-2.

LIST: Accesses the saved channels list.

… (MORE ACTIONS): Displays more remote control functions.

QUICK ACCESS**: Edits QUICK ACCESS (allows you to enter a specified app or Live TV directly by pressing and holding the number buttons).

+ VOL -: Adjusts the volume level.

FAV: Accesses your favorite channel list.

GUIDE: Displays the program event according to time scheduler.

MUTE (Speaker with X): Mutes all sounds.

MUTE (Speaker with X)**: Accesses the [Accessibility] menu.

CH Up/Down: Scrolls through the saved channels.

PAGE Up/Down: Moves to the previous or next screen.

Streaming Service buttons: Connects to the Video Streaming Service.

HOME (House): Accesses the Home menu.

HOME (House)**: Shows the previous history.

BACK: Returns to the previous screen.

EXIT: Clears on-screen displays and returns to last input viewing.

Navigation buttons (up/down/left/right): Scrolls through menus or options.

OK (Center button): Selects menus or options and confirms your input.

INFO: Shows information on the current program.

SAP: Enables SAP (Secondary Audio Program) Feature.

REC: Starts to record (Only Time MachineReady supported model).

Control buttons (Play, Pause, etc.): Control buttons for media contents.

Colored buttons: These access special functions in some menus.

** To use the button, press and hold for more than 1 second.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

Press the BACK and HOME buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

Pressing and holding the GUIDE button for more than 5 seconds will disconnect and re-register the Magic Remote at the same time.

Check if anything such as tape has been placed over the receiver.

Check if there is any obstacle between the product and the remote control.

Replace the batteries with new fresh ones.

Check if the product is turned on.

Check if the power cord is connected to a wall outlet.

Check if there is a problem in the wall outlet by connecting other products.

Check the power control settings. The power supply may be interrupted.

Check if the auto-off function is activated in the settings menu.

If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When cleaning, unplug the power cord and wipe gently with a soft/dry cloth.

Do not spray water or other liquids directly on the TV.

Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel.

Make sure to wring any excess water or cleaner from the cloth.

Do not spray water or cleaner directly onto the TV screen.

Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

To open the USER GUIDE, navigate to: [Settings Icon] -> [Support] -> [User Guide].

LG TV supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial (RS-232C) converter which is not made nor provided by LG.

Connect the USB end of the converter to the USB IN port on the TV and the RS-232C end to the external control device (PC).

You need to purchase a phone-jack to RS-232 cable required for the connection between the PC and the TV.

Connect the phone-jack end to the RS-232C IN (CONTROL & SERVICE) port on the TV and the D-Sub 9pin connector to the PC.

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (*General -> About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5. When you are finished, press EXIT.