LG 39LB561V-ZC (01) PDF Document

To attach the stand to your LG 39LB561V-ZC TV, please place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. The process differs slightly depending on your specific model series (LB55**/LB56**-ZE/ZC, LB62**-ZA/ZB vs. LB56**-ZT/ZQ, LB62**-ZE).

For models LB55**, LB56**-ZE / ZC, LB62**-ZA / ZB:

1. Attach the A Stand Base to the B Stand Base as shown in the diagram.

2. Secure the stand to the bottom of the TV using the provided screws. You will need 4 screws (4EA).

– For 32-inch models (32LB55**, 32LB56**-ZE/ZC, 32LB62**-ZA/ZB), use M4 x L20 screws.

– For other models in this series, use M4 x L14 screws.

For models LB56**-ZT / ZQ, LB62**-ZE:

1. Attach the A Stand Base to the B Stand Base as shown in the diagram.

2. Secure the stand to the bottom of the TV using the provided screws. You will need 4 screws (4EA).

– For 32-inch models (32LB56**-ZT/ZQ, 32LB62**-ZE), use M4 x L20 screws.

– For other models in this series, use M4 x L14 screws.

To connect your LG 39LB561V-ZC TV to a wall antenna socket, use an RF cable (75 Ω).

Notes:

• If you want to use more than 2 TVs, use a signal splitter.

• If the image quality is poor, install a signal amplifier properly to improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not supplied with the TV.

• Supported DTV Audio formats are MPEG, Dolby Digital, Dolby Digital Plus, and HE-AAC.

To connect a satellite dish to your LG 39LB561V-ZC TV (for satellite models only), connect the TV to a satellite dish to a satellite socket using a satellite RF cable (75 Ω). The port on the TV is labeled “LNB Satellite IN”.

The Euro Scart connection on your LG 39LB561V-ZC TV is used to transmit video and audio signals from an external device to the TV. Connect the external device and the TV set with a Euro Scart cable. It is important that any Euro Scart cable used is signal shielded.

The output type from the AV1 (TV Out) port depends on the current input mode:

Note for 3D models: When watching digital TV in 3D imaging mode, only 2D out signals can be output through the SCART cable.

When connecting various external devices to your LG 39LB561V-ZC TV, you can switch input modes to select the desired device. Available external devices include HD receivers, DVD players, VCRs, audio systems, USB storage devices, PCs, gaming devices, and others.

Important Notes:

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the TV port.

• If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through the DVD recorder or VCR.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• In PC mode, some resolution settings may not work properly depending on the graphics card.

You can operate the TV functions by pressing or moving the joystick button located below the TV screen up, down, left, or right.

Basic Functions:

• Power On: When the TV is off, place your finger on the joystick button, press it once, and release it.

• Power Off: When the TV is on, press and hold the joystick button for a few seconds and release it. (If the Menu is on screen, this action will exit the Menu.)

• Volume Control: Move the joystick left or right to adjust the volume.

• Programmes Control: Move the joystick up or down to scroll through the saved programmes.

Adjusting the Menu:

When the TV is turned on, press the joystick button one time. You can then adjust the Menu items by moving the joystick up, down, left, or right.

• TV off: Turns the power off.

• Settings: Accesses the main menu.

• Close: Clears on-screen displays and returns to TV viewing.

• Input List: Changes the input source.

NOTE: When you move the joystick, be careful not to press it first. If you press the joystick button first, you cannot adjust the volume level or scroll through saved programmes.

To prevent your LG 39LB561V-ZC from being scratched or damaged and for safe transportation, please follow this advice:

• Avoid touching the screen at all times, as this may result in damage.

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn it on its side or tilt it to the left or right.

• Do not apply excessive pressure, which could cause flexing or bending of the frame chassis, as it may damage the screen.

1. Lift and tilt the TV into its upright position on a table.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

CAUTION: Do not place the TV near or on sources of heat, as this may result in fire or other damage.

To secure the TV to a wall and prevent it from falling (this feature is not available for all models):

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are already bolts in the eye-bolt position, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

CAUTION: Make sure that children do not climb on or hang on the TV.

NOTE:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

To mount your LG 39LB561V-ZC on a wall, you will need an optional wall mount bracket that meets the VESA standard. It is recommended that wall mounting be performed by a qualified professional installer.

CAUTION:

• Disconnect the power first, and then move or install the TV. Otherwise, an electric shock may occur.

• If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount.

• Do not over-tighten the screws as this may cause damage to the TV and void your warranty.

• Use screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

Wall Mounting Bracket Specifications (Separate Purchase):

NOTE: The length of screws may differ depending on the wall mount. Make sure to use the proper length. For more information, refer to the manual supplied with the wall mount.

To use the remote control, point it toward the remote control sensor on the TV. To replace the batteries, open the battery cover, replace the (1.5 V AAA) batteries matching the (+) and (-) ends, and close the cover.

Remote Control Functions (LB55**, LB56** Models):