FREE ENGLISH LEVELONE WUA-1810 (01) PDF DOCUMENT.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF USER GUIDE.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF USER MANUAL.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF OWNER GUIDE.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF OWNER MANUAL.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF REFERENCE GUIDE.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF REFERENCE MANUAL.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH LEVELONE WUA-1810 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD LEVELONE WUA-1810 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I begin the setup for the LEVELONE WUA-1810 adapter?
Follow these initial steps to set up your LEVELONE WUA-1810 adapter:
1. Turn on your PC and insert the USB WiFi Adapter into a USB port on your PC.
2. Insert the packaging CD into the computer’s CD/DVD drive.
3. Open the folder on the CD to find the “Driver” folder, then the “windows” folder, and click the setup file to start the installation.
What is the process for installing the driver software for the LEVELONE WUA-1810?
During the driver software installation for the LEVELONE WUA-1810, you will be guided by the InstallShield Wizard. Please follow these steps:
1. When the “Preparing Setup” interface appears, please wait. Do not click the “Cancel” button, as this will stop the installation.
2. In the “REALTEK USB Wireless LAN Driver” interface, click the “Next” button to continue with the installation.
3. Wait while the interface shows “Now installing REALTEK USB Wireless LAN Driver”.
4. Continue to wait as the installation progresses.
How do I complete the LEVELONE WUA-1810 driver installation?
To finalize the installation of the LEVELONE WUA-1810 driver, once the “InstallShield Wizard Complete” window appears, select “Yes, I want to restart my computer now.” and then click the “Finish” button to restart your computer. This completes the installation process.
How do I connect the LEVELONE WUA-1810 to a wireless network after installation?
To connect your LEVELONE WUA-1810 to a wireless network, follow these steps:
1. After your computer has restarted, open the REALTEK installation application.
2. In the application window, click on the “Available Network” tab.
3. A list of available wireless networks will be displayed. Double-click the network you wish to connect to.
4. In the “Wireless Network Properties” window that appears, enter the network password in the “Network key” and “Confirm network key” fields.
5. Click “OK” to connect to the wireless network.
How can I view the connection information for my LEVELONE WUA-1810 adapter?
After connecting to a network with your LEVELONE WUA-1810, you can view the connection details by opening the REALTEK utility and selecting the “General” tab. This screen displays the following information:
Status Information:
• Status: Associated
• Speed: Tx and Rx speed (e.g., 300 Mbps)
• Type: Infrastructure
• Encryption: (e.g., AES)
• SSID: The name of the connected network
• Signal Strength: Displayed as a percentage
• Link Quality: Displayed as a percentage
Network Address:
• MAC Address
• IP Address
• Subnet Mask
• Gateway
CLICK HERE TO DOWNLOAD LEVELONE WUA-1810 (01) PDF DOCUMENT