LENOVO THINKVISION T27P-10 (01) PDF MANUAL

LENOVO THINKVISION T27P-10 (01) PDF SUMMARY:

Before installing the product, what should I do?

Read the Safety Information.

---

What items should be included in the product package?

• Flat Panel Monitor
• Information Flyer
• Stand
• Base
• USB C-C Cable
• HDMI Cable
• Power Cord

---

How do I set up the monitor?

1. Carefully lay the monitor on a flat surface.
2. Put the stand and base to the monitor.

---

What should I avoid when handling the monitor?

Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure.

---

How do I attach a VESA mount?

See “Wall Mounting (Optional)” on page 2-10.

---

What adjustments can be made to the monitor?

• Tilt
• Swivel
• Height Adjustment
• Monitor Pivot

---

How do you tilt the monitor?

See the illustration for an example of the tilt range.

---

How do you swivel the monitor?

With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.

---

How do you adjust the height of the monitor?

User needs to press down or lift up the monitor.

---

How do you pivot the monitor?

1. Adjust the screen position before rotating the monitor screen (Make sure that the monitor screen ascent to its highest point, and it inclines backward at 30°).
2. Then rotate clockwise until the monitor stops at 90°.

---

Where is the cable lock slot located?

Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position).

---

Before connecting and turning on the monitor, what should you do?

Be sure to read the Safety information located on page iii before carrying out this procedure.

---

How do you connect and turn on the monitor?

1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect the cables according to the icon indication.
3. For computer in HDMI connecting.

---

What HDMI cable does Lenovo recommend?

Lenovo recommends that customers who require to use the HDMI input on their monitor purchase the “Lenovo HDMI to HDMI cable OB47070”.

---

How do you connect a computer using the DisplayPort?

For computer in DisplayPort connecting.

---

What DisplayPort cable does Lenovo recommend?

Lenovo recommends that customers who require to use the DP Cable on their monitor purchase the " Lenovo DisplayPort to DisplayPort Cable 0A36537".

---

How do you connect a computer using USB Type-C?

For computer in USB Type-C connecting.

---

How do you connect a computer using USB Type-A?

For computer in USB Type-A connecting.

---

How do you transfer the audio source from DP, Type-C, HDMI, or USB?

Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from DP, Type-C, HDMI, or USB. Note: The audio output is in DP, Type-C, HDMI modes.

---

How do you connect a USB cable to the monitor?

Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the other end of the USB cable to an appropriate USB port on your device.

---

Will the USB downstream port provide power when the monitor switch is off?

No, the USB downstream port does not provide power while the monitor switch is off.

---

How do you insert the power cord into the monitor?

Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets.

---

What kind of power supply cord should be used?

A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2 ) shall be used.

---

What is the next step after connecting the cables?

Connect the cables with cable clip.

---

What should I do after connecting the cables with a cable clip?

1. Power on the monitor and the computer.
2. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website. Refer to the “Manually installing the monitor driver” section to install the driver.

---

Where can I register the Lenovo product?

Register your option on the following Web site: http://www.lenovo.com/register.

---

How do I optimize equipment setup to achieve and maintain good working posture?

The following topics describe how to optimize equipment setup to achieve and maintain good working posture:

• Arranging your work area
• Positioning your monitor

---

How do you position your monitor?

Position and adjust your computer monitor for comfortable viewing by considering the following items:

• Recommended viewing distance between the eye and the monitor screen is 1.5 x the diagonal of the screen. Solutions in meeting this required distance in cramped office situations include pulling desk away from wall or divider to make room for monitor, using flat panel or compact displays placing the monitor in the desk corner, or placing the keyboard in an adjustable drawer to create a deeper working surface.
• Monitor height: Position the monitor so your head and neck are in a comfortable and neutral (vertical, or upright) position. If your monitor does not have height adjustments, you might have to place books or other sturdy objects under the base of the monitor to achieve the desired height. A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. However, be sure to optimize your monitor height so the line of site between your eyes and the center the monitor suits your preferences for visual distance and comfortable viewing when your eye muscles are in a relaxed state.
• Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture.
• General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows.

---

What are some other tips for comfortable viewing?

• Use adequate lighting for the type of work you are performing.
• Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences.
• Keep your monitor screen clean so you can focus on the screen’s contents.

---

What are some quick tips for healthy work habits?

• Good posture starts with equipment setup: The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer. Be sure to optimize the position and orientation of your equipment by following the tips outlined in “Arranging your work area” so you can maintain a comfortable and productive posture. Also, be sure to use the adjustment capabilities of your computer components and office furniture to best suit your preferences now and as your preferences change over time.
• Minor changes in posture can help avoid discomfort: The longer you sit and work with your computer, the more important it is to observe your working posture. Avoid assuming any one posture for an extended period of time. Periodically make minor modifications in your posture to help deter any discomforts that might arise. Make use of any adjustments that your office furniture or equipment provide to accommodate changes in posture.
• Short, periodic breaks help ensure healthy computing: Because computing is primarily a static activity, it is particularly important to take short breaks from your work. Periodically, stand up from your work area, stretch, walk for a drink of water, or otherwise take a short break from using your computer. A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work.

---

Where can people with disabilities access information and technology?

https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php

---

When can the direct access controls be used?

The direct access controls can be used when the On-Screen Display (OSD) is not displayed.

---

How do you enable or disable the DDC-CI function using direct access controls?

Press and hold for 10 seconds to enable or disable the DDC-CI function.

---

How do you exit the menu using direct access controls?

Exit from menu.

---

How do you switch the video input source using direct access controls?

Input Change switches the video input source.

---

How do you access brightness adjustment using direct access controls?

Brightness Direct access to Brightness adjustment.

---

How do you access the OSD menu using direct access controls?

Menu To access OSD menu.

---

How do you confirm a selection using direct access controls?

Press to confirm selection.

---

How do you lock/unlock the menu using direct access controls?

Press and hold for 10 seconds will lock menu/un-lock menu.

---

How do you enter the next level on the main menu/sub menu status or enter the previous level on adjustment bar using direct access controls?

Enter Press to enter next level on main menu/sub menu status or enter previous level on adjustment bar.

---

How can the user controls be viewed?

To adjust the settings, the user controls can be viewed through the OSD.

---

How do you use the OSD controls?

1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments. Press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold for 10 seconds to disable / enable DDC / CI function. The words “DDC/ C I disable” shows on the screen.

---

How do you adjust the screen brightness in the OSD?

Screen Controls > Brightness.

---

How do you adjust the difference between light and dark areas in the OSD?

Screen Controls > Contrast.

---

How do you select a digital input signal in the OSD?

Advanced Setup > Input signal > Select digital among OSD Controls when you use USB-C/ DP / HDMI.

• Select 1-USB-C
• Select 2-DP (digital)
• Select 3-HDMI (digital)

---

How do you adjust the intensity of red, green, and blue in the OSD?

Advanced Setup > Color Mode.

---

How do you adjust the aspect ratio in the OSD?

Advanced Setup > Aspect Ratio.

• Original AR: Same Aspect Ratio with input signal.
• Full Screen: Expand image to full screen.
• 1:1: Full Screen: Expand image to 1:1.

---

How do you change the language of the menu in the OSD?

OSD Setting > Language. The language chosen only affects the language of the OSD. It has no effect on any software running on the computer.

---

How do you set the duration of time that the OSD will remain active when no operation is performed?

OSD Setting > Menu time out.

---

How do you adjust the menu horizontal location in the OSD?

OSD Setting > Menu Horizontal.

---

How do you adjust the menu vertical location in the OSD?

OSD Setting > Menu Vertical.

---

How do you restore the monitor to its factory default settings?

OSD Setting > Factory Default.

• No
• Yes

---

What is Low Blue Light Mode?

Low Blue Light Mode is reducing the blue light content.

---

What should users do if they want to use Extreme Mode (response time)?

The use of Extreme Mode (response time) may result in reduced display quality when fast moving video graphics are displayed. Users should check Extreme Mode (response time) to verify if it is compatible with any applications they would like to use it with.

---

What should you do when you connect your computer with TYPE-C cable?

When you connect your computer with TYPE-C cable, you can follow the OSD menu to choose the USB 2.0 with 4K2K at 60Hz or USB 3.0 with 4K2K at 30Hz.

---

Who controls the display mode the monitor uses?

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.

---

What is the native resolution display mode?

3840 x 2160 at 60 Hz.

---

When is power management invoked?

Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period.

---

What are the power management states?

• On: Green power indicator, normal screen
• Standby/Suspend: Amber power indicator, blank screen
• Off: Off power indicator, blank screen

---

What is the restoring operation for Standby/Suspend mode?

Press a key or move the mouse. There may be a slight delay before the image reappears.

---

What is the restoring operation for Off mode?

Press the power button. There may be a slight delay before the image reappears.

---

What should you do before performing any maintenance on the monitor?

Be sure to turn off the power.

---

What should you NOT do when caring for your monitor?

• Apply water or liquid directly to your monitor.
• Use solvents or abrasives.
• Use flammable cleaning materials to clean your monitor or any other electrical equipment.
• Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen.
• Use any cleaner which contains an anti-static solution or similar additives. This may harm the coating of the screen area.

---

What should you DO when caring for your monitor?

• Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen.
• Remove grease or finger marks with a damp cloth and a little mild detergent.

---

How do you detach the monitor base and stand?

1. Place the monitor on a soft and flat surface.
2. Remove the base and stand from the monitor.

---

How do you convert your LCD display from a desk-mounted to a wall-mounted display?

1. Verify that the Power button is turned Off, then disconnect the power cord.
2. Lay the LCD display face down on a towel or blanket.
3. Remove the base from the monitor, refer to “Detaching the monitor base and stand”.
4. Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 10 mm.
5. Attach the LCD display to the wall, following the instructions in the wall-mounting kit.

---

What is the minimum weight/load for use with UL Listed Wall Mount Bracket?

8kg

---

What do I do if I have a problem setting up or using the monitor?

Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem.

---

What should I do if the words “Out of Range” are shown on the screen, and the power indicator is flashing green?

• If you are replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor.
• If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer.
• If these options do not work, contact the Support Center.

---

What should I do if the image quality is unacceptable?

• Be sure the signal cable is firmly plugged into the system and monitor.
• Select another color setting from the OSD menu.

---

What should I do if the power indicator is not lit and there is no image?

• Be sure the power cord is connected properly.
• Be sure the outlet has power.
• Power on the monitor.
• Try using another power cord.
• Try using another electrical outlet.

---

What should I do if the screen is blank and power indicator is amber?

• Press any key on the keyboard or move the mouse to restore operation.
• Check the Power Options settings on your computer.

---

What should I do if the power indicator is orange, but there is no image?

Be sure the video cable is connected with the system properly.

---

What should I do if the monitor brightness and contrast are at the lowest setting?

Adjust the brightness and contrast setting on the OSD menu.

---

What should I do if the image has fuzzy lines in text or a blurry image, or horizontal or vertical lines through the image?

• Adjust the resolution settings on your system to match the native resolution for this monitor: 3840 x 2160 at 60 Hz.
• Perform automatic image setup. If automatic image setup does not help, perform manual image setup.
• When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system. See the Advanced section of your system’s display properties.

---

How do you manually install the monitor driver in Windows 7 or Windows 10?

Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 10.

---

How do you install the monitor driver in Windows 7?

To use the Plug and Play feature in Microsoft Windows 7, do the following:

1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating system.
4. From the Lenovo website, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).
5. Open the Display Properties window by clicking Start, Control Panel and Hardware and Sound icon and then clicking the Display icon.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the following path: X:\Monitor Drivers\Windows 7 (where X indicates “the folder in which the downloaded driver is located” (such as a desktop)).
14. Select the “lent27p-10.inf” file and click the Open button. Click the OK button.
15. In the new window, select LEN T27p-10 and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

---

How do you install the monitor driver in Windows 10?

To use the Plug and Play feature in Microsoft Windows 10, do the following:

1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10 operating system.
4. From the Lenovo website, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).
5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control Panel, then double click the icon of Hardware and Sound, and then click Display.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the following path: X:\Monitor Drivers\Windows 10 (where X indicates “the folder in which the downloaded driver is located” (such as a desktop)).
14. Select the “lent27p-10.inf” file and click the Open button. Click the OK button.
15. In the new window, select LEN T27p-10 and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

---

What should I do if I still can’t solve the problem?

Please contact the Lenovo Support Center.

---

What are examples of misuse or abuse not covered by warranty?

• Images burned onto the screen of a CRT monitor. Burned image is preventable by utilizing a moving screen saver or power management.
• Physical damage to covers, bezel, base, and cables.
• Scratches or punctures on monitor screens.

---

How do I register to receive product service and support updates, as well as free and discounted computer accessories and content?

Go to: http://www.lenovo.com/register

---

Where is online technical support available?

Online technical support is available during the lifetime of a product at: http://www.lenovo.com/support

---

Before contacting a Lenovo technical support representative, what information should I have available?

option name and number, proof of purchase, computer manufacturer, model, serial number and manual, the exact wording of any error message, description of the problem, and the hardware and software configuration information for your system.