LENOVO THINKPAD T14 GEN 6 (01) PDF Document

To get started with your LENOVO THINKPAD T14 GEN 6, follow these steps:

1. Connect any necessary adapters, such as a Lenovo USB-C to VGA, USB-C to DisplayPort, or HDMI to VGA adapter, if needed (for selected models).

2. Connect the power cord to the power adapter.

3. Plug the power adapter into the USB-C port on the computer.

4. Press the power button to turn on the computer.

You can use the TrackPoint pointing device on your LENOVO THINKPAD T14 GEN 6 to navigate the user interface as you would with a traditional mouse.

For models equipped with a fingerprint reader on the power button, you can simply press the power button to log in to the computer.

You can launch the TrackPoint Quick Menu on your LENOVO THINKPAD T14 GEN 6 by double tapping the TrackPoint pointing stick. This menu allows for quick configuration of some device settings. This function can also be set to launch with a single tap.

Lenovo Commercial Vantage is an application on your LENOVO THINKPAD T14 GEN 6 that allows you to adjust device settings and check for system updates.

The Lock on leave feature on your LENOVO THINKPAD T14 GEN 6 is designed to protect your privacy and improve battery life by locking the computer when you are away.

Note: The initial BIOS disabled this function. It will be enabled by a future software update.

For selected models, your LENOVO THINKPAD T14 GEN 6 includes Lenovo View features to enhance your video experience:

• Video Enhancer: Improves the quality of your video.

• Background Removal: Allows you to remove the background during video calls.

• Privacy Guard: Helps protect your screen from prying eyes.

• Posture Warning: Alerts you to help maintain a proper posture while using the computer.

To connect your LENOVO THINKPAD T14 GEN 6 to a Wi-Fi network, follow these steps:

1. Click the quick settings area on the taskbar.

2. In the Wi-Fi quick setting, click Manage Wi-Fi connections.

3. Click the desired Wi-Fi network and click Connect. Provide the necessary information if required.

To disconnect, click the Wi-Fi icon again. The Disconnected icon will appear when you’re not connected.

For selected models of the LENOVO THINKPAD T14 GEN 6, you can connect to a 4G or 5G cellular data network. Ensure you have a wireless wide area network (WWAN) card along with a SIM card or an installed eSIM profile.

To connect:

1. Click the network icon, and then select the cellular network icon from the list.

2. Provide the necessary information if required.

To disconnect from the cellular network, click the cellular network icon again.

Disabling the operating system’s sleep setting on your LENOVO THINKPAD T14 GEN 6 will result in higher energy consumption. It is recommended that you keep the sleep setting enabled, as it will automatically switch the product into standby mode to conserve power.

The LENOVO THINKPAD T14 GEN 6 meets international guidelines for exposure to radio waves. The 10g SAR limit is 2 W/kg (body-worn SAR) and 4 W/kg (limb SAR).

The maximum reported SAR values with 0 mm separation distance are as follows:

The LENOVO THINKPAD T14 GEN 6 operates with the following frequency bands and maximum radio-frequency power:

Note: Not all wireless modes / bands may be enabled depending on your product configuration. Usage of this device is limited to indoor locations in the bands 5150 – 5350 MHz and 5945 – 6425 MHz.