LENCO BMC-090 (02) PDF DOCUMENT

The main parts and controls of the LENCO BMC-090 microphone, as identified in the user manual, are as follows:

1. Play/pause button

2. Previous song/decrease music volume level

3. Mic volume +/-, slide switch

4. Echo+/-, slide switch

5. Music volume +/-, slide switch

6. Next song/increase music volume level

7. LED lights on/off (Long press this button to enter TWS function)

8. Power on/off; Mode: Bluetooth/Micro SD card/USB reader; Magic voice

9. Phone holder

10. USB charging socket

11. Micro SD card socket

12. Line-out socket

13. USB connection

The package for the LENCO BMC-090 includes a Micro USB cable for charging and a 3.5mm Aux-out cable.

To charge the LENCO BMC-090, follow these steps:

1. Please make sure the karaoke speaker is fully charged before first use.

2. Connect the product with the included USB cable.

3. Plug the micro USB end into the charging socket (10).

4. The indicator will show a red light when charging.

5. The indicator will turn off when fully charged.

You can connect the USB cable to a USB home charger or another device with a USB charging function.

To pair your LENCO BMC-090 via Bluetooth:

1. Turn on the microphone by long-pressing the power button (8). The LED light will come on and it will announce “Bluetooth mode”.

2. On your external device, search for “Lenco BMC-090” and select it to connect.

3. Once connected successfully, you will hear: “connected”.

4. If a password is required, enter “0000”.

5. You can now use a karaoke APP or select a song from your device’s music player and sing along with the microphone.

The LENCO BMC-090 has a Bluetooth reception function, which means that you can receive a wireless Bluetooth sound signal from an external source like a smartphone. You cannot transmit any Bluetooth sound with it.

To use the Magic Voice effects on the LENCO BMC-090:

1. Press the power button (8) twice to enter Magic voice effect mode.

2. Short press the button again to change the magic voice effect. There are 3 different voice effects.

3. Press the button twice again to turn off this mode.

It is possible to pair two LENCO BMC-090 Karaoke microphones with 1 smartphone or tablet using the TWS function:

1. Turn on both microphones (8) and make sure they are in Bluetooth mode.

2. If it is the first time they are being paired together, long-press the LED light button (7) of both microphones to enter the TWS function.

3. When the pairing is successful, the microphones will emit a signal.

4. Then pair the microphones with your smartphone or tablet.

To disconnect the microphones, long-press the LED light button (7) on one of the units or insert a micro SD card or USB stick.

To connect again, you just need to long-press the LED light button on one of the units.

To use the Micro SD card mode on the LENCO BMC-090:

1. Turn on the Microphone and insert a micro SD card preloaded with songs. You will hear “SD card mode” from the speaker.

2. The speaker will automatically start playing songs from the SD Card.

3. To go to the next song: Short press the next song button.

4. To go to the previous song: Short press the previous song button.

5. To pause the track: Short press the play/pause button.

6. To play the track: Short press the play/pause button.

To use the USB stick mode on the LENCO BMC-090:

1. Insert the preloaded USB stick into the USB socket and the music will automatically start playing.

2. To go to the next song: Short press the next song button.

3. To go to the previous song: Short press the previous song button.

4. To pause the track: Short press the play/pause button.

5. To play the track: Short press the play/pause button.

With the LENCO BMC-090, you can also play the music and microphone voice on an external speaker or micro HiFi set. Just connect the AUX 3.5mm cable to the AUX out of the BMC-090 and to the AUX in connector of the external speaker or micro HiFi set. You can adjust the volume on the BMC-090 for microphone and music.

The volume of the microphone and music on the LENCO BMC-090 can be adjusted by means of the slider switch, but with this switch it is not possible to adjust the volume of the microphone and music separately. If you want to adjust the volume of the music so that you hear the microphone better, you can do this by long pressing the Previous song button to decrease the volume, or long pressing the Next song button to increase the volume. Make sure the music switch is set to maximum.

The technical specifications for the LENCO BMC-090 are:

Name: Portable Wireless Microphone Bluetooth Speaker with holder

Item NO.: Lenco BMC-090

Source Input: micro SD card/USB/BT/Flashing Light/LINE-OUT

Input: DC5V; 500mA

Output Power: 5W*1

Bluetooth version: V5.0

Wireless frequency: 2402-2480MHz

Product size: 80*74*277mm

Weight: 407.6g

LED power: 800mw

Distortion: <1%

Battery capacity: 1200mAh

Material: ABS

Charging Time: About 4 hours

Playing Time: About 8 hours (The playing time depends on volume and LED)

Transmission distance: about 10m

Audio format SD/USB: MP3

Maximum USB stick capacity: 64GB

Please keep the following instructions in mind when using the LENCO BMC-090:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature is between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use a USB extension cable because it can cause interference resulting in failing of data.

17. This product is intended for non-professional use only and not for commercial or industrial use.

18. Make sure the unit is adjusted to a stable position.

19. Never remove the casing of this device or place it on other electrical equipment.

20. Do not allow children access to plastic bags.

21. Only use attachments/accessories specified by the manufacturer.

22. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

Please observe the following cautions regarding battery use for the LENCO BMC-090:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• Battery cannot be subjected to high or low extreme temperatures, or low air pressure at high altitude during use, storage or transportation.

• Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.

• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.

• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

• Attention should be drawn to the environmental aspects of battery disposal.