K&H THERMO-KITTY BED (01) Image

FREE ENGLISH K&H THERMO-KITTY BED (01) PDF USER GUIDE
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF USER MANUAL
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF OWNER GUIDE
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF OWNER MANUAL
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF REFERENCE GUIDE
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF INSTRUCTION GUIDE
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF REFERENCE MANUAL
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF INSTRUCTION MANUAL
FREE ENGLISH K&H THERMO-KITTY BED (01) PDF OPERATING INSTRUCTIONS


CLICK HERE TO DOWNLOAD K&H THERMO-KITTY BED (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

What is the first step before using the product?

Read all instructions.


How can electrical hazards be prevented?

To protect against electrical hazards, DO NOT immerse the cord, plug, or appliance in water or other liquid.


Is supervision required when the appliance is in use?

Close supervision is necessary when the appliance is used by or near children.


When should the appliance be unplugged from the outlet?

ALWAYS unplug from the outlet when the appliance is not in use.


What should be done if the electrical appliance is damaged or malfunctions?

DO NOT operate any electrical appliance with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner. All malfunctioning appliances should be RETURNED to the factory for examination.


Should the appliance be used for purposes other than its intended use?

DO NOT use the appliance for other than its intended use.


Is it permissible to puncture the heater?

DO NOT PUNCTURE the heater for any reason.


What is the required voltage for this appliance?

This appliance is for use with 110-120 volt AC ONLY.


Where should the cord exit from the bed?

The CORD MUST EXIT towards the back of the bed, away from the normal travel of the pet.


What is required to separate the pet bed warmer from the stuffing material?

A liner must separate the pet bed warmer from the stuffing material.


What option should be ensured for the pet when using this product?

When using this product, make sure your pet has the option of sleeping on or OFF the bed.


What should be done with these instructions?

SAVE THESE INSTRUCTIONS for your use.


How should the heating pad be positioned?

Carefully position the heating pad between foam pieces and close the opening so your pet cannot remove the heating pad. When in use, check the pad to ensure proper positioning.


How should the bed be oriented regarding the cord?

Turn the bed so the cord is exiting the back of the bed, away from the normal path traveled by your pet.


How should the bedding be cleaned safely?

When cleaning the bedding, unplug and remove the heater so you do not subject it to being immersed in liquids or cleaners.


How should the cover be prepared for washing?

Remove the cover for washing.


What instructions should be followed when reassembling the THERMO-KITTY BED?

Follow the above instructions when reassembling your THERMO-KITTY BED.


What choice should always be given to your pet regarding the heated bed?

ALWAYS give your pet the choice to lie on OR off the heated bed.


How can the new THERMO-KITTY BED be tested?

After operating for 1-2 hours, place your hands on your pet’s new THERMO-KITTY BED for 20-30 seconds, applying pressure.


What kind of warmth does the THERMO-KITTY BED provide?

The THERMO-KITTY BED is designed to provide mild radiant warmth. It does not get hot!


CLICK HERE TO DOWNLOAD K&H THERMO-KITTY BED (01) PDF MANUAL


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.