FREE ENGLISH KEITHLEY 8503 (01) PDF USER GUIDE
FREE ENGLISH KEITHLEY 8503 (01) PDF USER MANUAL
FREE ENGLISH KEITHLEY 8503 (01) PDF OWNER GUIDE
FREE ENGLISH KEITHLEY 8503 (01) PDF OWNER MANUAL
FREE ENGLISH KEITHLEY 8503 (01) PDF REFERENCE GUIDE
FREE ENGLISH KEITHLEY 8503 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH KEITHLEY 8503 (01) PDF REFERENCE MANUAL
FREE ENGLISH KEITHLEY 8503 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH KEITHLEY 8503 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD KEITHLEY 8503 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is the purpose of the Model 8503 DIN to BNC Trigger Cable?
The Model 8503 DIN to BNC Trigger Cable is used to connect the Model 2000 Multimeter with any instrument having BNC trigger connectors instead of micro DIN trigger connectors.
What types of connectors does the Model 8503 cable have?
One end of the Model 8503 has an 8-pin micro DIN connector, which connects to the Model 2000 Multimeter. The other end splits into two BNC connectors: one being specified as the connector for VMC, or Voltmeter Complete (output), and the other being specified as the connector for EXT TRIG, or External Trigger (input).
In its factory configuration, which pins of the Model 2000 trigger link connector are functional and what are their uses?
In its factory configuration, only pins 1 and 2 of the trigger link connector for the Model 2000 are functional. Pin 1 is used for the VMC output, while pin 2 is for the EXT TRIG input.
What is the length of the Model 8503?
The Model 8503 is 1 meter long.
What is the description for each pin number on the Model 2000 rear panel trigger link connector?
The descriptions for each pin number are as follows:
Pin Number | Description
1 | Voltmeter Complete Output
2 | External Trigger Input
3 | no connection *
4 | no connection *
5 | no connection *
6 | no connection *
7 | Signal Ground
8 | Signal Ground
Can the functions of certain pins on the Model 2000 rear panel trigger link connector be reconfigured?
Yes, either pin 3 or 5 may be configured as an output instead of pin 1. Either pin 4 or 6 may be configured as an input instead of pin 2.
CLICK HERE TO DOWNLOAD KEITHLEY 8503 (01) PDF MANUAL