Free English JOYO JA-05W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD JOYO JA-05W (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

What are the safety warnings for the JOYO JA-05W?

Please adhere to the following warnings when using your JOYO JA-05W:

Don’t disassemble or repair this product by yourself.

Don’t use or store it near any heat sources, damp and dusty areas. Avoid violent vibration or shock.

Don’t drop this product otherwise it may malfunction.

Don’t use alcohol or other cleaning fluids to clean this product.

Please turn off the unit when it’s not in use.

If the unit shuts down automatically during use, it means the battery runs out, please charge it in time.

Please keep it away from a place that has iron filings, so as to prevent iron filings from being attracted by the speaker and thus affecting the sound quality.


What are the parts and functions of the JOYO JA-05W?

The parts and functions of the JOYO JA-05W are as follows:

1. Type-C port: Charge the product via the attached Type-C charging cable. We suggest that you use a 5V 2A charger. Warning: Don’t use chargers with Voltage>5V, as they will damage the product or cause other serious consequences.

2. Tone Control Knob: Turn it counterclockwise to reduce the TREBLE, while turning it clockwise increases the TREBLE.

3. Power Switch/Indicator: Long press it to turn on/off the unit.

4. 6.35mm adapter: For connecting to electronic wind instruments, guitar, and more.

5. Volume Control Knob: Turn it counterclockwise to reduce the Volume, while turning it clockwise increases the Volume.

6. Bell mouth orifice: Don’t clog it, otherwise it will produce abnormal sound.


What do the indicator lights on the JOYO JA-05W mean?

The indicator lights on the JOYO JA-05W have the following meanings:

Red LED is on: The unit is in the process of charging.

Red LED extinguishes (while charging): The unit is fully charged.

Blue LED is flashing: The unit is turned on, but there is no Bluetooth connection.

Blue LED is on (solid): Bluetooth is connected successfully.

Red LED is flashing: The battery is low, please charge it in time.


How do I connect the JOYO JA-05W to a device via Bluetooth?

Follow these steps to connect your JOYO JA-05W via Bluetooth:

Step 1: Turn on the unit.

Step 2: Search for JOYO JA-05W from the device list and pair.

Step 3: After they paired successfully, you can start to play music via the app.


How do I use the JOYO JA-05W with a musical instrument?

The JOYO JA-05W is a plug and play amplifier. To use it with an instrument like an electric guitar or an electronic wind instrument, simply plug the unit’s 6.35mm adapter directly into the instrument’s output jack.


What are the technical specifications of the JOYO JA-05W?

Power: DC 5V, 1A Type-C (Built-in 3.7V/1500mAh lithium battery)

Output Power: 5W

Input Impedance: 20KΩ

Speaker Impedance: 4Ω

Weight: 141g

Dimensions: 60(L)×42(W)×105(H)mm


What is included in the package with the JOYO JA-05W?

The package for the JOYO JA-05W contains the following items:

JA-05W ×1

Owner’s manual ×1

Charging cable ×1

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD JOYO JA-05W (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.