IPYLE PIFMPK9 (01) PDF MANUAL

The device has a power off memory feature. The last used frequency before the unit is powered off will be kept in memory. When you use the unit the next time, the last used frequency will be displayed automatically.

To protect the unit’s excellent functions, avoid using it in the following environments:

1. Too much moisture

2. Too high temperature

3. At direct sunlight

4. Where it is easy to fall off

Pay attention to the following when listening:

1. To avoid harm to your ear, please choose a suitable volume level.

2. To adjust the volume, please do not turn it up to a very high level to avoid damage to your car speaker system.

3. Please be more careful or stop using in any environment with potential danger.

1. No need to change any equipment of the car. Just plug the cigar head into the cigarette lighter socket.

2. Special port for Ipod with charge function.

3. It is perfect for all kinds of Ipod such as Ipod mini, Ipod nano, and Ipod Video.

4. Built-in FM stereo wireless transmitter transmits the music from the Ipod to the car radio for playing. A PLL circuit ensures stability of frequency and prevents the frequency from skipping fast.

5. Full band to avoid interference. The frequency range is from 88.1MHz to 107.9MHz. The frequency interval is 0.1MHz. Up to 10 channels can be stored in memory.

6. Large size LCD digital display for frequency. The blue backlight design is convenient for operation in the dark.

7. Transmitting range is more than 8 meters.

8. 3.5mm audio input jack for connecting external audio devices with a 3.5mm plug such as MP3, MP4, portable CD, DVD, etc.

9. 3.5mm audio output jack can output an audio signal to other audio devices such as recording equipment.

10. Power off frequency memory function.

11. Auto ON when it receives any audio signal. Auto OFF when no audio signal is received in 50 seconds.

1. Frequency up/down

2. Function keys: adjust/store frequency

3. LCD digital display

4. Ipod connector

5. 3.5mm audio input jack

6. 3.5mm audio output jack

7. Cigar head

8. Polarity “-“

9. Polarity “+”

1. Plug the cigar head into the car cigarette lighter socket. The LCD display will light up and show the current frequency.

2. Plug your Ipod into the special port for the Ipod. Press “play” to start playing.

1. Press the frequency up/down buttons on the transmitter to set a suitable frequency for use. The LCD display shows the frequency being used.

2. Turn on your car radio. Adjust the frequency on the radio to be the same as the transmitter’s frequency. You can do this manually or use your car radio’s AUTO SCAN function to set the frequency.

If you experience any interference, press the CH+/CH- buttons to choose another suitable frequency. A slight press of CH+/CH- will move the frequency up or down by 0.1MHz. Press and hold CH+/CH- for a few seconds to fast forward or backward through the frequencies.

Press the “P” button to select a previously stored channel. The frequency will cycle from CH01 to CH10. The LCD will first display the selected channel number (CH NO) and then the frequency after one second.

To keep a regularly used frequency in memory, first set it as the current frequency. Then, press and hold the “P” button for a few seconds until the CH NO flashes, which indicates you have entered the channel saving mode. Use the CH+ and CH- buttons to choose the memory location (CH NO.) where you want to save the frequency. Finally, press “P” again to save both the channel number and the frequency into memory.

If you are using an MP3, MP4, portable CD, DVD, or another device with a 3.5mm audio output, please connect it to the transmitter’s 3.5mm input jack using a 3.5mm audio cable.

Frequency Range: 88.1MHz-107.9MHz (frequency interval is 0.1MHz)

Frequency Stability: +10PPM (-10°C~+50°C)

Noise Limitation: ≥60dB

Frequency deviation: ≤75KHz

Transmitting range: ≥8M

Audio input bandwidth: 100~15000Hz

Power Supply: DC12V