FREE ENGLISH INGERSOLL RAND D1410 (01) PDF USER GUIDE
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF USER MANUAL
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF OWNER GUIDE
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF OWNER MANUAL
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF REFERENCE GUIDE
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF REFERENCE MANUAL
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH INGERSOLL RAND D1410 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD INGERSOLL RAND D1410 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is the intended use of the Cordless Drill/Drivers?
These Cordless Drill/Drivers are designed for drilling, honing, reaming, hole sawing and driving threaded fasteners.
What are the key safety warnings for this power tool?
Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
• Responsibly recycle or dispose of Batteries. Do not puncture or burn Batteries. Improper disposal may endanger the environment or cause personal injury.
• Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal injury or property damage.
How do I install and remove the battery?
To install the battery pack, align it with the base of the tool and slide it on until it clicks securely into place. To remove the battery pack, press the release button on the pack and slide it off the tool.
How do I check the battery charge level?
Press the button on the battery to display the current charge level via the indicator lights. The charge levels are as follows:
Four lights: 100-75%
Three lights: 75-50%
Two lights: 50-25%
One light: 25-10%
One blinking light: 10-0%
What are the product specifications for the D5140, D1130, and D1410 models?
| Model | Voltage V, DC | Battery Model | Free Speed | Max. Torque in-lb (N-m) | Drive | ||
|---|---|---|---|---|---|---|---|
| High (rpm) | Low (rpm) | Type | Size inch (mm) | ||||
| D5140 | 20 | BL2010 BL2022 | 0-1900 | 0-500 | 700 (80) | Chuck | 1/2″ (13) |
| D1130 | 12 | BL1203 | 0-1600 | 0-400 | 205 (23) | Chuck | 3/8″ (10) |
| D1410 | 12 | BL1203 | 0-1600 | 0-400 | 205 (23) | QC driver | 1/4″ |
What are the sound and vibration levels for the D5140, D1130, and D1410 models?
| Model | Battery Model | Sound level dB(A) (EN60745) | Vibration (m/s²) (EN60745) | ||
|---|---|---|---|---|---|
| † Pressure (Lp) | # Power (Lw) | Level | *K | ||
| D5140 | BL2010 BL2022 | 75 | 86 | 1.2 | 0.6 |
| D1130 | BL1203 | 64 | 75 | 0.9 | 0.5 |
| D1410 | BL1203 | 64 | 75 | 0.9 | 0.5 |
† KPA = 3dB measurement uncertainty
# KWA = 3dB measurement uncertainty
*K = Vibration measurement uncertainty
Who should perform repairs and maintenance on the tool?
Tool repair and maintenance should only be carried out by an authorized Service Center. Refer all communications to the nearest Ingersoll Rand Office or Distributor.
How should the product and batteries be handled at the end of their life?
When the life of the electrical product has expired, it must be recycled in accordance with all applicable standards and regulations (local, state, country, federal, etc.). Improper disposal may endanger the environment.
Responsibly recycle or dispose of Batteries. Do not puncture or burn Batteries. Improper disposal may endanger the environment or cause personal injury.
What do the disposal symbols on the product indicate?
Recycling Symbol: Return waste material for recycling.
Crossed-out Bin Symbol: Do not dispose of this product with household waste material.
Li-Ion with Crossed-out Bin Symbol: Product contains Lithium-Ion. Do not dispose of this product with household waste material.
How can I determine the tool’s year and month of manufacture?
The year and month of manufacture can be determined from the serial number. For example, in the serial number T20A0001, the “20” represents the year (2020) and the letter “A” represents the month.
The month is indicated by a letter code:
A = January
B = February
C = March
D = April
E = May
F = June
G = July
H = August
J = September
K = October
L = November
M = December
CLICK HERE TO DOWNLOAD INGERSOLL RAND D1410 (01) PDF MANUAL