ICLEVER IC-BK05 (01) PDF Document

Bluetooth Version: Bluetooth 5.1

Operating Range: Up to 10m

Modulation System: GFSK

Lithium Battery Capacity: 750mAh

Working Time with Backlit: >5h

Working Time without Backlit: 300h

Stand-by Time: 90 days

Charging Time: <4h

Lithium Battery Life: 3 years

Key Life: 3 million clicks

Unfolding Dimensions: 291 x 117 x 8.25 mm

Folding Dimensions: 166 x 120 x 14.8 mm

Front Side Material: ABS

Back Side Material: Aluminum alloy

Power Indicator: Unfold the keyboard to power on, and the indicator will be on for 3s. It will stay red while charging. Press Fn + right “Alt” key to check the power status. Each flash represents 25% battery.

Status Indicator: Press Fn + C keys to enter Bluetooth pairing mode.

Caps Lock Indicator: Press the caps lock key to switch between uppercase and lowercase. Note: the indicator will not be on for Android devices.

Open the blance stand to keep the balance when typing.

Press “Fn + light bulb key” key to turn on/off the backlit function:

1st time press to turn on backlit.

2nd time press to increase backlit brightness.

3rd time press to turn off backlit.

Press “Fn + Up Arrow” or “Fn + Down Arrow” keys to change backlit colors.

Step 1. Unfold the keyboard to power it on; power indicator will be green for 3s, then off.

Step 2. Plug the provided Micro USB cable to connect your PC/laptop and IC-BK05 keyboard.

Step 3. Press “Fn” + “R” keys meantime to enter wired connection mode.

Step 4. The status indicator will be green after successfully paired.

Step 1. Unfold the keyboard to power it on; power indicator will be green for 3s, then off.

Step 2. Press “Fn” + “Q” keys to enter channel 1.

Step 3. Press “Fn” + “C” keys meantime to enter pairing mode; status indicator will flash blue, starting to search the available bluetooth device.

Step 4. Find the Bluetooth name “iClever IC-BK05 Keyboard” and click to connect it.

Step 5. The status indicator will be off after successfully paired.

Step 1. Press “Fn” + “W” keys meantime to enter channel 2.

Step 2. Press “Fn” + “C” keys meantime to enter pairing mode; status indicator will flash blue, starting to search the available bluetooth device.

Step 3. Find the Bluetooth name “iClever IC-BK05 Keyboard” and click to connect it.

Step 4. The status indicator will be off after successfully paired.

Step 1. Press “Fn” + “E” keys meantime to enter channel 3.

Step 2. Press “Fn” + “C” keys meantime to enter pairing mode; status indicator will flash blue, starting to search the available bluetooth device.

Step 3. Find the Bluetooth name “iClever IC-BK05 Keyboard” and click to connect it.

Step 4. The status indicator will be off after successfully paired.

Step 1. Delete the connection records with iClever keyboard. For example, for iPad, click “Settings” > “Bluetooth” > under “MY DEVICE” to delete the iClever keyboard connection record.

Step 2. Turn off the Bluetooth and turn it on again to Refresh. For example, for iPad, click “Settings” > “Bluetooth” > if the on-screen switch beside Bluetooth currently show as ON, tap it twice to refresh it.

Step 3. Connect it again.

Note: Auto re-connect function: when you turn on the keyboard, it will connect with the last-used device automatically.

Press Fn + Q/W/E/R key to switch among the connected devices.

Step 1. Press Fn + Q/W/E keys to choose the Bluetooth Channel.

Step 2. Press Fn + C keys to Bluetooth pairing mode again.

The table below describes special key combinations for different operating systems. Press fn + A/S/D to choose right system.

iOS 6.0 and above

Mac OS X 10.6 to Mac OS X 10.12 and above

Windows 8 / 10, PC computer with a Bluetooth host

Android 6.0 and above with Bluetooth HID profile (Smartphones and Tablets)

NOTE: This keyboard is not fully compatible with Samsung Smart TV, Bluetooth Adapter, Mac mini and Nokia phones.

As this is a multilingual keyboard, set the language of the device to your desired language before use.

1. For iOS devices only: Settings > General > Keyboard > Keyboards > Add new keyboard > Select desired language.

2. For Samsung Android devices only: Settings > Controls > Language and input > Samsung Keyboard > Select input languages > Select desired language.

3. For Android devices only: Settings > Language & input > Physical Keyboard > Set up keyboard layouts > Select desired language.

4. For Windows devices only: Control Panel > Clock, Language and Region > Select desired language.

The keyboard will enter sleep mode after 30 minutes of inactivity. To activate it, press any key and wait for 3 seconds.

Note: The first 3 seconds after the keyboard wakes up, there may be a delay in typing.

Charge the device with the included USB cable. Connect one end of the charging cable to a USB charger, and the other end to the charging port of the keyboard (Output: DC 5V/200mA; USB charger is not included).

In the charging process, the charging indicator will glow red. Generally, it takes about 2 hours to get it fully charged.

Possible solutions:

1. Make sure the device you are ready to pair is Bluetooth-enabled.

2. Restart the keyboard and your devices.

3. Charge the keyboard for 30 minutes.

4. On your device, delete the connection records with iClever keyboard.

5. On your device, turn off the Bluetooth and turn it on again to refresh.

6. Make sure that your iClever device and computer are within close proximity of each other.

7. Try to connect it again as the “Pairing Instruction” introduce.

Possible solutions:

1. Make sure that your iClever device and computer are within close proximity of each other.

2. Try moving away from metal and other sources of wireless signal. Try moving away from: Any device that could emit wireless waves: Microwave, cordless phone, baby monitor, wireless speaker, garage door opener, WiFi router.

3. Charge the keyboard for 30 minutes. Low battery power can adversely affect connectivity and overall functionality.

4. Do not run too many apps simultaneously.

5. Make sure your operating system (OS) is up to date.

6. Try on a different computer/smartphone/tablet.

1. On a Mac, choose the Apple menu > “System Preferences”, click “Keyboard”, and choose the Keyboard tab.

2. Locate the “Key Repeat” slider setting and adjust it to the “Off” position.

Turn on the Filter Keys:

Click win key -> Settings -> Ease of Access -> Keyboard -> find “Use Filter Keys”, turn it on.

1. Keep the keyboard away from sharp objects that could damage it.

2. Do not put heavy objects on the keyboard.

3. Do not stretch, twist or apply force to the keyboard.

4. To clean the keyboard, gently wipe it by using a moist cotton cloth.

5. Make sure the keyboard is not exposed to any liquid. Do not spill coffee, tea or other liquids on the keyboard.

6. Keep away from oil, chemical or any other organic liquid.

7. Do not use the keyboard near microwave items.