FREE ENGLISH HOBOT LEGEE-D8 (01) PDF USER GUIDE
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF USER MANUAL
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF OWNER GUIDE
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF OWNER MANUAL
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF REFERENCE GUIDE
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF REFERENCE MANUAL
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH HOBOT LEGEE-D8 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD HOBOT LEGEE-D8 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
HOBOT LEGEE-D8 (01) PDF SUMMARY:
What should I do before using the LEGEE?
Put away objects including wires, cloths, slippers, fragile objects, etc. on the floor to improve cleaning efficiency and safety.
How do I position the Charging Station or LEGEE LuLu?
Clear the objects around the charging station or LEGEE LuLu. Connect the power cord to the charging station or LEGEE LuLu and tidy the wires from the floor. To ensure a better user experience of the App, place the charging station or LEGEE LuLu in an area with good Wi-Fi coverage. Peel off the backings paper from the bottom of the charging station and keep the charging station on a level surface, flat against a wall. If using LEGEE LuLu, keep it on a level and non-carpet surface and leave 3cm distance from a wall and more than 1.5m away from the carpet or obstacles then install the ramp.
How do I power on and charge the LEGEE for the first time?
Use the Home button to ensure LEGEE is returned to the charging position properly. Before the first time of use, fully charge the battery for at least 6 hours until the LED indicator green light is ON. To maintain the performance of the Li-ion battery, keep your LEGEE charged.
How do I install the side brush and attach the cleaning cloth?
Press down the side brush until you hear a click sound. Attach the cleaning cloth flatly to the mopping pad.
What liquid should I use to fill the water tank?
Fill with pure water or LEGEE detergent only. DO NOT use any other detergent or liquid to prevent blockage of the pipes and the spray nozzles. When filling the LEGEE LuLu, use the TDS meter to indicate the water hardness, and fill with water that is TDS 5-300ppm.
What should I do to start using the App?
Search for “LEGEE” in the App Store or Google Play or scan the QR code to download and install the App. Create a HOBOT Account or Quick Login. Open the LEGEE App, tap “Add a New LEGEE” and follow the instructions on the screen to add LEGEE.
How do I set up LEGEE LuLu?
Update LEGEE App and LEGEE-D8’s firmware. Change the water tank lid on LEGEE-D8. Keep LEGEE LuLu on a level and non-carpet surface and leave 3cm distance from a wall and more than 1.5m away from the carpet or obstacles then install the ramp. Use either the Charging Station or LEGEE LuLu with LEGEE, do not use both as LEGEE can only anchor one starting point on one map. Position LEGEE’s round-end right in front of LEGEE LuLu, then press docking/undocking button to initiate. Save a new map as the default map after LEGEE-D8’s first task starting from LEGEE LuLu.
What does LEGEE LuLu do automatically?
When LEGEE completes the cleaning task, LEGEE LuLu will refill the water tank, recharge the battery, wash and dry the mop for LEGEE automatically or in accordance to your setup in the App. LEGEE LuLu will recharge LEGEE when a task is finished or when LEGEE’s battery is low. It will refill the water tank to keep LEGEE’s water tank with a good level of water. It will wash the cleaning cloth for about 5 minutes. And it will dry the cleaning cloth with 40℃ (104℉) air for 2 hours.
How often should I maintain the Trash Bin & Screen Filter?
Clean as needed or follow the App instruction.
How often should I maintain the High Efficiency Filter?
Clean as needed or follow the App instruction, and replace when it is too dirty (when the App shows that the trash bin is full even after you’ve emptied it and washed the filter).
How often should I maintain the Side Brush & Brushroll?
After each use or follow the App instruction, and replace when it is too dirty or when it is worn out and bristles are falling off.
How often should I maintain the Ag+ion Cleaning Cloth?
After each use, and replace when it is too dirty, smells funky or when it is worn out.
How often should I maintain the Spray Nozzle?
Clean as needed, and replace when it is clogged and cannot be cleaned with the pin.
How often should I maintain the Bumper/Sensors/Charging Contacts/Refilling Port?
Before each use or follow the App instruction.
How often should I maintain the Universal Wheel?
Clean as needed.
How often should I maintain the Waste Water Tank?
Clean as needed or when LEGEE LuLu shows red light or follow the App instruction.
How often should I maintain the Dual Brush and Instant Drain?
After each use.
How do I clean the Side Brush?
Pull off the side brush from the device and remove any tangled hair or debris. If necessary, rinse the side brush with warm water to clean dirt off and restore it to its original shape. Reinstall the side brush by pushing down until you hear a click sound.
How do I clean the Brushroll?
Push open the brushroll cover. Take out the brushroll. Use the cleaning tool to cut loose the tangled hair and debris to clean the brushroll, rinse then dry when needed. Clear the hair between the gap. Reinstall the brushroll.
How do I clean the Ag+ion Cleaning Cloth?
You can wash the cleaning cloth in two ways: Hand washing or Washing machine. Hand washing: Thoroughly wash the cloth with warm water and general-purpose laundry detergent. Washing machine: Wash using the warm cycle, then air dry.
How do I clean the Trash Bin?
Take out the trash bin by releasing the latch and lifting the handle. Remove the screen filter and empty the trash bin. Wash and air-dry the trash bin.
How do I clean the Screen Filter & High Efficiency Filter?
Shake off debris by tapping the filters against your trash container. Rinse the filters if necessary. Do NOT rub the filters or use high-pressure water. Be sure to leave the filters to dry thoroughly before reinstalling them.
How do I clean the Universal Wheel?
Pull up the universal wheel and clear the hair, rinse and dry when needed.
How do I clean the Sensors & Charging Contacts?
Use a soft dry cloth to wipe and clean the charging contacts and all sensors. Press the right end of the bumper and pull the left end to detach the bumper from the device. Wipe clean the bumper, 7 FDS sensors and reinstall the bumper. Wipe clean the cliff sensors, charging contacts and refilling port.
(Use with LEGEE LuLu) How do I test the Spray Nozzle?
Test the spray nozzles using the button in the App.
(Use with LEGEE LuLu) How do I unclog or replace the Spray Nozzle?
To unclog the spray nozzle: Clean the spray nozzle with the push pin. To replace the spray nozzle: Use a screwdriver to loosen the screws holding the spray nozzle in place. Replace the old nozzles with new ones, then reinstall the nozzles.
(Use with LEGEE LuLu) How do I maintain the Waste Water Tank?
Take out the waste water tank from LEGEE LuLu and empty it. Fasten the latch properly.
(Use with LEGEE LuLu) How do I clean the Dual Brush and Instant Drain?
Lightly squeeze the side of the wash module cover to open the compartment. Lift the brushes to remove, rinse and gently rub the rubber to clean. Use a clean cloth to wipe clean the instant drain sink and remove the dirt.
What is included in the box with the LEGEE-D8?
LEGEE-D8, Charging station, AC adapter, Water bottle, Ag+ ion cleaning cloth, Spray nozzles pack, Side brushes, High efficiency filter, and User manual.
What is included in the box with the LEGEE LuLu?
LEGEE LuLu, Power cord, Ramp, and TDS meter.
How should I move the LEGEE LuLu?
Hold LEGEE LuLu’s upper part with both hands. Do not band the ramp or drag its top cover to avoid breaking the parts.
What should I do if LEGEE does not start cleaning?
Check if the power is switched ON and the battery is fully charged. If LEGEE can’t be started by the on-device buttons, please check if the child lock is engaged in the App, press the child lock button for 3 seconds or disengage the child lock in the App. Please check if there’s hardware error alert in the App.
What should I do if LEGEE returns to the charging station or LEGEE LuLu without completing the cleaning task?
The battery is low (orange and blue light flashing). LEGEE will resume cleaning after it’s sufficiently charged. If LEGEE returns with sufficient power: LEGEE may have misjudged the landscape due to the floor molding or due to moving furniture, closed doors and considered the task completed. LEGEE could also be blocked by narrow hallways or doorways so make sure to clear away the obstacles. Check if there are virtual barriers blocking the way so LEGEE considered the task completed. Check if you have only chosen specific rooms instead of the entire house for the current cleaning task.
What should I do if LEGEE cannot return to the charging station or LEGEE LuLu?
Place the charging station or LEGEE LuLu in an open space or clear the objects around it and clean the sensors with clean dry cloth. Check if the adapter is properly connected to the charging station or LEGEE LuLu and is plugged into the power socket, the charging indicator will show blue light. There is adhesive—which leaves no stain on the floor— under the charging station for fixation, please make sure the charging station is firmly fixed on the ground.
What should I do if LEGEE does not resume the unfinished task after charging?
Check if it’s under the Do Not Disturb period.
What should I do if LEGEE does not start charging?
Check if the adapter is properly connected to the charging station or LEGEE LuLu and is plugged into the power socket. The charging indicator will flash blue light when charging. Poor contact with the charge contacts. Please switch off the power and remove the power source from the charging station or LEGEE LuLu. Clean all charging contacts by using a clean cloth with rubbing alcohol to.
What are some tips when charging LEGEE?
Use the Home button to ensure LEGEE is returned to the charging position properly. It is advised to keep LEGEE switched on when charging, LEGEE will be able to return to the charging station or LEGEE LuLu automatically in case LEGEE is moved. LEGEE will stop charging when the battery is full, the power consumption is very low when LEGEE is standing by, however, it will resume charging for a short period of time once in a while. Letting LEGEE stay connected to the charging station or LEGEE LuLu can help to maintain the battery’s best performance.
What should I do if LEGEE is making a buzzing noise when charging?
Poor contact between the charging contacts, please use the Home button to let LEGEE return to the charging position or LEGEE LuLu again. Switch off LEGEE and disconnect the charging station from the power source. Wipe clean the charging contacts with a clean cloth and alcohol to remove dust or rust. Both overpowered outlet and/or underpowered outlet can cause the charging station to make the buzzing noise. Try to use a different power outlet in the house. The sound frequency at which a human can hear ranges between 20 Hz to 20,000 Hz, you are likely to hear buzzing noises amplified from your charger. All power adapters or transformers will make a buzzing sound to some degree, the device may still be used without any concern as there is no need to worry from a safety point of view.
What should I do if the cleaning result is less satisfying?
Switch off LEGEE, clean/change the side brush, empty the trash bin, and wash/change the high efficiency filter and the cleaning cloth.
What should I do if LEGEE does not spray water?
Check if there is water in the water tank. Test the spray nozzles using the button in the App, it will make LEGEE to spray once. If LEGEE does not spray water, please clean the spray nozzles or replace with new ones.
What should I do if the side brush does not spin normally?
Remove the side brush from the device, clean the hair between the side brush and the device and reinstall it.
How do the cliff sensors work?
The cliff sensors can avoid the damage to LEGEE by preventing it to fall off the cliffs such as stairs or the edge of the floor. To avoid LEGEE to enter the recessed area, please set a virtual barrier in the App.
What should I do if LEGEE works/moves abnormally?
Switch off LEGEE, clean the side brush and cliff sensors. Check if the cleaning cloth is firmly attached to the sensors. Check if the LiDAR cover sensor is working properly by pushing the top of the LiDAR sensor cover, it should bunce back smoothly.
What should I do if LEGEE does not play the voice prompts?
Check the volume. Check if it’s under the Do Not Disturb period.
What should I do if I am unable to add LEGEE to the App via Wi-Fi?
Restart LEGEE and the App. Check if the Wi-Fi signal is stable, and if LEGEE and your smartphone are under the same Wi-Fi network. Check if the App needs an update. Check if you have entered a wrong Wi-Fi password.
How do I use LEGEE without a Wi-Fi router?
Please turn on the Hotspot function, tap “No Wi-Fi?” during the connecting process and follow the instruction.
What should I do if LEGEE is offline?
Check if the Wi-Fi or Hotspot signal is stable. If LEGEE has been moved to a different wireless network, please re-establish the connection between LEGEE and the App before use.
Can LEGEE work when offline?
LEGEE can work following the schedule queue even when it is offline, all the cleaning data will be stored in the device first, when it is connected again, the stored data will show up in the App.
What should I do if I am unable to save a default map?
The cleaned area must be larger than 3m2. Use the “Quick Mapping” function so LEGEE will enter the rooms to make a brief scan and complete map-drawing in a shorter period of time. Make sure LEGEE has not been moved or lifted off the floor during cleaning.
What should I do if LEGEE LuLu shows red light?
Please empty the waste water tank and refill the clean water tank. Hardware error, please contact local services.
What should I do if LEGEE’s water tank is overfilled by LEGEE LuLu?
Please use the TDS meter to ensure the water you filled in LEGEE’s clean water tank is TDS 5-300ppm. If the water’s TDS is <5ppm, LEGEE wouldn’t be able to stop the refilling task due to fail to detect the water level with insufficient electrolyte; on the other hand, if the TDS is >300ppm, it may cause cloggage on LEGEE’s spray nozzles easily.
CLICK HERE TO DOWNLOAD HOBOT LEGEE-D8 (01) PDF MANUAL