GRACO 8740 (01) PDF MANUAL

GRACO 8740 (01) PDF SUMMARY:

What should I do with this document?

Please save for future use.

---

What is included in the order form?

The order form includes fields for the name, address, city, state, zip code, and telephone number. It also has sections for payment method, such as check or money order, or credit card (Visa, Mastercard, Discover), and spaces for the account number, expiration date, and signature. Additionally, there are fields for the total cost, shipping and handling, sales tax, and total amount due.

---

How much is shipping and handling?

Shipping and handling is $5.00.

---

What is the total shipping cost if I am outside the continental U.S.?

The total shipping cost is $15.00 outside the continental U.S.

---

What sales tax applies to my purchase?

Sales tax varies by state: CA 7.25%, IL 6.25%, IN 5%, NY 8.25%, OH 5.75%, PA 6%, SC 5%.

---

What information must be included when ordering replacement parts?

The model number and serial number of your jumper must be included on the form to ensure proper replacement parts.

---

Where can I find the model number of my jumper?

The model number can be found under the tray of the jumper.

---

What are the safety warnings for the jumper?

• NEVER LEAVE YOUR CHILD UNATTENDED. Always keep your child in view.
• DO NOT leave jumper in doorway when not in use. Store out of children’s reach.
• DO NOT use jumper as a swing.
• DO NOT use near stairs.
• Use only in recommended doorways.
• DO NOT use if child weighs over 25 pounds (11.3 kg). or if child becomes too active to safely play in the jumper.
• Avoid strangulation. DO NOT place items with a string around your child’s neck, suspend strings from this product, or attach strings to toys.
• DO NOT use jumper when height cannot be adjusted so that only the front of your child’s foot touches the floor.
• DISCONTINUE USING YOUR JUMPER should it become damaged or broken.
• DO NOT use when your child can walk unaided.
• DO NOT use if the tray of your jumper is lower than your baby’s waist level when your child stands in the jumper.
• USE JUMPER when you have a door frame which will properly support the jumper.
• USE JUMPER when your baby can sit upright unaided and hold his head upright, and can support most of his body weight with his legs (about 6 months old).
• USE JUMPER when you are able to watch your baby at all times while playing in the jumper.

---

Where should I return the form with payment?

Return the form with payment to: GRACO Children’s Products Inc. Customer Service Department P.O. BOX 100, Main Street Elverson, PA 19520.

---

What is the phone number for customer service in the USA?

The telephone number for customer service is 1-800-345-4109.

---

How can I purchase parts in Canada?

To purchase parts in Canada, contact Elfe at 1-800-667-8184 (Montreal: 514-344-3533 Fax: 514-344-9296).

---

What should I check before assembling the product?

Check that you have all the parts shown before assembling your product. If any parts are missing, call Customer Service.

---

Is adult assembly required?

Yes, adult assembly is required.

---

Are tools required to assemble the jumper?

No tools are required.

---

How do I wash the seat cover?

Machine wash in cold water on delicate cycle and drip-dry. NO BLEACH.

---

How do I clean the jumper?

Use only household soap and warm water. NO BLEACH or detergent.

---

How often should I inspect the jumper?

From time to time check your jumper for worn parts, torn material or stitching. Replace the parts as needed. Use only Graco replacement parts.

---

How do I attach the seat?

1. Turn the tray upside down.
2. Be sure all 7 rings are hooked onto the pegs.
3. Insert the 7 short straps of jumper seat into the slots.
4. Pull the 7 short straps through the slots until the loops are completely through the slots. The two loops on the short straps must overlap edges of the slots as shown.
5. Test seat assembly by pushing down hard on seat.

---

How do I adjust the jumper?

Adjust the slide buckle, so that only the front of your baby’s foot touches the floor.

---

What should I do if the jumper is too close to the floor?

1. Pull on small loop as shown until the sewn end of the loop passes through the slot in the adjustment buckle.
2. Continue to pull out the small loop as shown until the strap is proper length.

---

How do I hang the jumper?

Ensure there is a minimum ½" (1.25 cm) flat surface at the top of the molding. The wall thickness should be 3" (7.6 cm) to 6½" (16.5 cm). Check that clamp is secure on door frame by pulling firmly down on the clamp cover. If molding moves, repair it before using the jumper.