GORENJE ICG2000SP (01) PDF Document

Read the manual carefully. It contains important information on safety, usage, cleaning, and maintenance for your GORENJE ICG2000SP to ensure it provides reliable service for many years.

Before connecting the GORENJE ICG2000SP, ensure the mains socket has the correct rating (16A, 230V). Only use the appliance if your home’s electrical system has a rating of 16A.

No. Never allow the GORENJE ICG2000SP induction hob to operate unattended, especially at high power settings, as the heating reaction is extremely fast.

Take care when using simmering pans on your GORENJE ICG2000SP. Simmering water may dry up unnoticed, resulting in damage to the pot and to the hob, for which no liability will be assumed.

If cracks, fractures, or any other defects appear in your GORENJE ICG2000SP, immediately switch off the appliance, disconnect the fuse, and call for professional service.

Do not place combustible, inflammable, or heat-deformable objects directly underneath the GORENJE ICG2000SP hob.

No. Do not put aluminium foil or plastic onto the cooking zones of the GORENJE ICG2000SP. Keep everything that could melt away from hot cooking zones.

Use a special glass scraper to immediately remove any sugar or sugary foods from the GORENJE ICG2000SP hob while it is still hot to avoid damaging the surface.

No. Metal items (knives, forks, spoons, lids, etc.) must never be put down on the GORENJE ICG2000SP induction hob as they may become hot. There is a risk of burning.

Keep the sensor buttons of your GORENJE ICG2000SP clean. If food boils over onto the sensor buttons, we advise you to activate the OFF button.

Yes. Hot pans should not cover the sensor buttons of your GORENJE ICG2000SP, since this will cause the appliance to switch off automatically.

To activate the child lock on your GORENJE ICG2000SP: The hob must be switched off. Press the ON/OFF sensor to switch on the hob. Once activated, “—-” will be displayed and an acoustic signal will be heard. Press the child lock sensor and hold it for approximately 3 seconds. A short beep will sound indicating the child lock is active.

To deactivate the child lock on your GORENJE ICG2000SP, press the child lock sensor and hold it for approximately 3 seconds. A short beep will sound confirming it is deactivated.

Cookware for the GORENJE ICG2000SP must be made of metal, have magnetic properties, and have a sufficiently large base.

Suitable cookware for GORENJE ICG2000SP: Enamelled steel pots with a thick base, cast iron pots with an enamelled base, and pots made of multi-layer stainless steel, rustproof ferrite steel, or aluminium with a special base.

Unsuitable cookware for GORENJE ICG2000SP: Pots made of copper, stainless steel, aluminium, ovenproof glass, wood, ceramic, and terracotta.

Perform the magnet test on your GORENJE ICG2000SP: Move a magnet towards the base of your cookware. If it is attracted, you can use the cookware on the induction hob.

The cooking zone on the GORENJE ICG2000SP (260mm) requires a minimum pan base diameter of 120mm.

Never use pans with a misshapen base on the GORENJE ICG2000SP. A hollow or rounded base can interfere with the overheating protection, causing the appliance to get too hot, which may lead to glass cracking or pan base melting.

Cooking level 1-2: Keeping food warm, simmering small quantities (lowest power setting).

Cooking level 3: Simmering.

Cooking level 4-5: Simmering larger quantities or roasting larger pieces of meat until cooked through.

Cooking level 6: Roasting, getting juices.

Cooking level 7-8: Roasting.

Cooking level 9-10: Roasting (highest power output).

1. Upon connection to mains, indicators light up. GORENJE ICG2000SP is ready.

2. Ensure sensor area is clean and place suitable cookware on the center of the zone.

3. Press the ON/OFF sensor for 1 second. When “—-” is displayed, the hob is ready for settings.

4. Press the Power/Temperature selection button. Adjust power with + or – sensors (200W to 2000W). Switch off anytime by pressing the ON/OFF button.

5. To specify cooking temperature, press the Power/Temperature selection button again. Adjust temperature (60°C to 240°C) with + or – sensors.

1. Switch on the GORENJE ICG2000SP and select the desired cooking power.

2. Press the TIMER selection button. “00:30” appears on the display.

3. Use + or – buttons to set the time (1 to 179 minutes).

4. Use the + button for minutes and the – button for hours. Press and hold to increase speed.

5. The cooking zone switches off automatically when the time expires.

Clean the GORENJE ICG2000SP every time it is used. Use a damp cloth and a little washing-up liquid. Then, dry the hob with a clean, dry cloth to ensure no detergent residue remains.

Clean the entire GORENJE ICG2000SP thoroughly once a week using a commercial glass ceramic cleaner. This creates a protective film that resists water and dirt.

For heavy soiling or stains on the GORENJE ICG2000SP, it is best to clean while the hob is slightly warm. Soak boiled-over food with a wet cloth and remove remaining soiling with a special glass scraper.

Shiny spots on the GORENJE ICG2000SP result from cookware base rubbing on the surface, especially when using aluminium-based cookware or unsuitable cleaning agents.

E0: Internal circuit error. Contact service.

E1: No cookware or incompatible cookware. Check for suitability.

E2: Overheating protection on power mode (>150°C). Allow to cool.

E3: Electronic control of excess voltage (>270V). Check supply voltage.

E4: Electronic control of low voltage (<160V). Check supply voltage.

E5: Temperature sensor open or short circuit. Contact service.

E6: IGBT open or short circuit. Contact service.

E7: Overheating protection on TEMP mode (>240°C). Allow to cool.

If fuses blow regularly while using the GORENJE ICG2000SP, contact a technical customer service or an electrician.

Check if a fuse has blown in your home, ensure the GORENJE ICG2000SP is connected to the mains, verify that the sensor buttons are not covered by a cloth or object, and ensure you are using suitable induction cookware.

Yes. The GORENJE ICG2000SP and the induction-compatible pots may make technical noises; this is normal and indicates no risk.

It is normal for the GORENJE ICG2000SP cooling fan to run after the unit is switched off to cool down the electronic components.

Clicking or cracking sounds from the GORENJE ICG2000SP occur for technical reasons and cannot be avoided.

No. The GORENJE ICG2000SP is not intended to be operated by means of an external timer or separate remote-control system.

Do not use harsh abrasive cleaners or sharp metal scrapers on the GORENJE ICG2000SP or its accessories, as this may scratch the surface and cause the glass to shatter.

The GORENJE ICG2000SP can be used by children aged 8 and above if they are supervised. The appliance and its cord should be kept out of reach of children less than 8 years old.

Persons with cardiac pacemakers or implanted insulin pumps should ensure that their implants are not affected by the GORENJE ICG2000SP induction field (frequency range 20-50 kHz).

Benefits include energy-saving direct energy transfer, increased safety (only heats when a pot is present), effective transfer, rapid heat-up, low risk of burns, and sensitive control.

No. With the GORENJE ICG2000SP, heat is not transferred from a heating element through the pot; it is generated directly in the base of the container by induction currents.

If the GORENJE ICG2000SP cannot be switched off due to a defect in the sensor control, immediately disconnect the appliance from the power supply and contact customer service.

The noise level of the GORENJE ICG2000SP is less than 70 dB(A).

Never place pans, tea towels, or other objects on the GORENJE ICG2000SP sensor buttons, as they may be interpreted as finger contact.

No. The GORENJE ICG2000SP hob must not be used while a built-in oven is performing a pyrolysis cleaning operation.

Ensure the GORENJE ICG2000SP appliance is switched off before attempting to replace any lamp to avoid the risk of electric shock.

When the programmed time expires on the GORENJE ICG2000SP, the activated cooking zone will be switched off automatically, and a short beep will sound.

To check the remaining cooking time on your GORENJE ICG2000SP, press the timer selection button while the unit is operating.

Do not let the GORENJE ICG2000SP power cord hang over the edge of a table or worktop. If damaged, it must be replaced by the manufacturer or a qualified service agent.

It is essential that after using any cooking zone on the GORENJE ICG2000SP, you verify it is switched off.

Yes. Overheated fats and oils on the GORENJE ICG2000SP may spontaneously ignite. Always supervise the preparation of food with fats and oils.

Never extinguish ignited fats or oils on the GORENJE ICG2000SP with water. Put the lid on the pan and switch off the cooking zone.

No. Never touch the surfaces of the GORENJE ICG2000SP, as they become hot during operation. Keep children at a safe distance.

Never use aggressive cleaning agents, rough scouring agents, abrasive saucepan cleaners, or rust and stain removers on the GORENJE ICG2000SP surface.

No. Do not use steam cleaners or high-pressure cleaners to clean the GORENJE ICG2000SP, as this may result in an electric shock.

Grains of sand that may fall onto the GORENJE ICG2000SP while peeling potatoes or cleaning vegetables can scratch the surface when moving pots. Always ensure no sand remains on the hob.

No. Changes in the color of the GORENJE ICG2000SP hob do not affect the function or stability of the glass ceramic material; these are usually food residues that have burnt onto the surface.

When setting the time on the GORENJE ICG2000SP, press and hold the timer sensor buttons to change the display value at an increasing rate.

The GORENJE ICG2000SP child lock is used to prevent unauthorized or accidental operation of the cooking zones.

No, the GORENJE ICG2000SP is designated for personal/home use only.

First, consult the “What to do if trouble occurs?” section of the GORENJE ICG2000SP manual to see if you can rectify the minor problem yourself before calling for service.