GOOBAY DVB-T DIA 42 PS (01) PDF Document

The GOOBAY DVB-T DIA 42 PS is an active DVB-T indoor antenna including a power supply designed for receiving digital terrestrial HD/SD TV. It features an extremely low noise amplifier, an LTE filter, and matching technology to ensure stable signal reception. The device can be installed using a stand or mounted on a wall.

To ensure safe operation of the GOOBAY DVB-T DIA 42 PS, the following safety guidelines should be followed:

1. Only skilled electricians may assemble and disassemble the housing of the product to avoid the risk of electric shock and short circuits.

2. Avoid contacting mains voltages as there is a danger of life by electric shock.

3. Never bridge contacts or put objects into ventilation slots or ports to prevent short circuits.

4. Attend to safe cable installation to avoid injury by stumbling.

5. This product is not a toy and contains small parts that can be swallowed; it should be kept away from children.

6. Install and store the product and its accessories in a way that persons cannot be injured and objects cannot be damaged by dropping or stumbling.

7. Operate the product only with a voltage of 230 V AC and unplug all cables when not in use or during thunderstorms.

8. Avoid extreme influences such as heat, coldness, humidity, direct sun insulation, vibrations, and mechanical pressure.

9. Do not use damaged products or parts and only use the device in dry interior rooms.

10. Never let the device remain unattended when in use.

The following items are included with the GOOBAY DVB-T DIA 42 PS:

1 x wall bracket

2 x wall screws

2 x wall dowels (for concrete walls)

1 x power supply (230 V~)

1 x power inserter

1 x DVB-T antenna

1 x stand

1 x User manual

To install the GOOBAY DVB-T DIA 42 PS using the provided stand, slide the antenna onto the stand until it locks into place.

The GOOBAY DVB-T DIA 42 PS can be mounted on wood or concrete walls by following these steps:

Step 1. Make sure no live cables or tubes are inside the wall behind the place of installation.

Step 2. Use a boring machine to drill two holes of 35 mm depth into the wall at the correct distance. Use the wall bracket as a gauge for the distance.

Step 3. For concrete walls, hammer the provided dowels into the drill holes using a hammer. Note that for stone walls, other dowels may be necessary, and wooden walls normally do not need any dowels.

To connect the GOOBAY DVB-T DIA 42 PS using the included power supply, follow these steps:

Step 1. Connect the antenna cable to the power inserter and then connect the power inserter to the Set-Top Box (DVB-T Receiver).

Step 2. Connect the delivered power supply to the DC connection of the power inserter and plug the other side into a 230 V AC mains socket.

If you prefer an alternative connection without the separate power supply, follow these steps for the GOOBAY DVB-T DIA 42 PS:

Step 1. Connect the antenna cable directly to the Set-Top Box (DVB-T Receiver).

Step 2. Activate the antenna powering function within the settings of your DVB-T Receiver or your television.

If the signal quality of the GOOBAY DVB-T DIA 42 PS is too low, change the position and place of the antenna. High places near windows are often ideal. After repositioning, perform a new channel scan on your DVB-T Receiver or TV.

The GOOBAY DVB-T DIA 42 PS is maintenance-free. For cleaning, follow these instructions:

1. Always disconnect the mains plug when the device is not in use.

2. Use a dry and soft cloth to clean the product. Be careful to avoid scratches.

3. Use a slightly moist cloth for heavy stains, but ensure no liquid enters the device and look out for live cables.

4. Do not use any cleaning supplies as they can cause burns to the materials.

5. Store the product in a dry and dust-proof place away from children. Avoid places with high temperatures or humidity.

6. Keep the original packing for transport to avoid damages.

If the GOOBAY DVB-T DIA 42 PS is not functioning, check the following:

1. Ensure that the assembling order was followed correctly according to the installation instructions.

2. Make sure the antenna is receiving power either through the provided power supply or through the receiver.

3. If signal reception is poor, try changing the location or position of the antenna.

The technical specifications for the GOOBAY DVB-T DIA 42 PS are as follows: