GOLD METAL ASTRO POP 16OZ 2023XE (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD GOLD METAL ASTRO POP 16OZ 2023XE (01) PDF MANUAL


PDF Content Summary: Instruction Manual Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA Part No. 41474 Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN SAFETY PRECAUTIONS DANGER Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle. 008_051514 DANGER Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Any alterations to this equipment will void the warranty and may cause a dangerous condition. This appliance is not intended to be operated by means of an external timer or separate remote-control system. NEVER make alterations to this equipment. Read the Installation, Operating, and Maintenance Instructions thoroughly before installing, servicing, or operating this equipment. 014_020416 WARNING To avoid burns, DO NOT touch the kettle or any heated surface. DO NOT place or leave objects in contact with heated surfaces. 013_092414 WARNING ALWAYS wear safety glasses when servicing this equipment. 010_010914 WARNING No user serviceable parts inside. Refer servicing to qualified service personnel. 011_051514 WARNING Read and understand operator’s manual and all other safety instructions before using this equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862 022_060215 Page 2 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN SAFETY PRECAUTIONS (continued) WARNING DO NOT allow direct contact of this equipment by the public when used in food service locations. Only personnel trained and experienced in the equipment operation may operate this equipment. Carefully read all instructions before operation. 012_010914 WARNING This machine is NOT to be operated by minors. 007_010914 This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Note: Improvements are always being made to Gold Medal’s equipment. This information may not be the latest available for your purposes. It is critical that you call Gold Medal’s Technical Service Department at 1-800-543-0862 for any questions about your machine operations, replacement parts, or any service questions. (Gold Medal Products Co. does not assume any liability for injury due to careless handling and/or reckless operation of this equipment.) Page 3 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN INSTALLATION INSTRUCTIONS Inspection of Shipment After unpacking, check thoroughly for any damage which may have occurred in transit. Claims should be filed immediately with the transportation company. The warranty does not cover damage that occurs in transit, or damage caused by abuse, or consequential damage due to the operation of this machine, since it is beyond our control (reference warranty in back of manual). Manual Read and understand the operator’s manual and all other safety instructions before using this equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862. Items Included with this Unit 16 oz. Corn Measure with Handle 6 oz. Measure

Aluminum Scoop 20cc Measure Setup This unit has been tested at the factory. Light Bulb (bulb may vary by model) Power Supply Receptacle / Cover (2023E Units Only)

1. Remove all packaging and tape prior to operation. 2. Place unit on a sturdy, level base for use. 3. Install the light bulb (do not over-tighten) into the lamp holder located inside the cabinet on the ceiling of the popper. Always be sure the unit is OFF and unplugged before installing or changing the bulb (reference the Electrical Requirements section). 4. Reference the instruction manual for the oil dispense unit for instructions on connecting the unit to the popper. 5. After setup, the unit should be cleaned prior to use (see Care and Cleaning section of this manual). Page 4 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Electrical Requirements The following power supply must be provided: 2023E: 120 V~, 2784 W, 60 Hz 2023XE, 2023XEN: 230 V~, 2784 W, 50 Hz DANGER Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle. 008_051514 A certified electrician must furnish sufficient power for proper machine operation and install any supplied receptacle. We recommend this equipment be on a dedicated and protected circuit. Failure to wire properly will void the warranty and may result in damage to the machine. It is Gold Medal Products Co.’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not recommended due to safety concerns, and may cause sacrificed and/or reduced performance. Make sure cord is located to prevent a trip hazard or unit upset. Before You Plug In Machine 1. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle. 2. Make sure the wall outlet can accept the grounded plugs (where applicable) on the power supply cord. 3. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect the outlet and correct if necessary. 4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable). 5. Install the unit in a level position. CAUTION If the supply cord is damaged, it must be replaced by Gold Medal Products Co., its service agent or similarly qualified persons in order to avoid a hazard. 039_080614 Page 5 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN OPERATING INSTRUCTIONS Controls and Their Functions OIL SYSTEM MASTER SWITCH Sends power to the oil pump. The warmer/blower on the oil pump is activated. The warmer/blower on the oil pump will keep coconut popping oil in liquid form if the doors on the base are kept closed. It may be desirable to keep this switch on at night if you have problems keeping the coconut oil liquefied. Coconut oil will congeal at temperatures below approximately 76º F [24º C]. (Reference Instruction Manual for oil dispense unit.) RED OIL DISPENSE MOMENTARY SWITCH When pushed, this will dispense the predetermined amount of oil into the kettle. LIGHT AND WARMER SWITCH This switch operates the interior light and the forced air popcorn crisping system. KETTLE MOTOR SWITCH This switch operates the popcorn agitator motor. This switch must be on at all times when popcorn (popped and un-popped) is present in the kettle. This switch activates the exhaust fan. KETTLE HEAT SWITCH This switch turns on the heat elements located in the popcorn kettle by sending power to the Big Eye electronic control system. YELLOW LIGHT AND AUDIBLE SOUND The Astro-Pop is equipped with the state of the art Big Eye electronic control that “watches your popcorn machine” to deliver optimum popping performance. The Big Eye control will signal the operator to: • Load the corn and oil or • Dump the popped corn from the kettle or • Turn OFF the Kettle Heat if you are finished popping corn. 1 2 4 3 Item Part No. Model(s) Part Description Qty. 48660 2023E 125V GREEN PILOT LIGHT 1 1 48660EX 2023XE-XEN PILOT LIGHT, 250V GREEN 2 41031 ALL OIL PUMP SWITCH 1 55039 2023E 125V AMBER PILOT LIGHT 3 1 55039EX 2023XE-XEN PILOT LIGHT, AMBER 230V 4 42798 ALL LIGHTED ROCKER SWITCH 5 Page 6 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Popping Instructions This section describes popping instructions for Standard (salted) popcorn. Remember When the Yellow Light comes ON, and Audible Signal (if enabled) is sounding, one of the following actions should be taken: • Load the corn and oil or • Dump the popped corn from the kettle or • Turn OFF the Kettle Heat if you are finished popping corn. Amount of Popcorn and Oil This popper is equipped with a corn, salt, and oil measure. Gold Medal recommends flavored and colored coconut oil. Popcorn popped in coconut oil stays fresh longer and does not leave black deposits in your kettle like other oils. Use only top quality, fresh popcorn from reputable suppliers. Kettle Size Popcorn Charge Oil Charge Flavacol (Salt) 16 oz. 16 oz. (473 ml) 5 oz. (148 ml) 1.5 Tblsp. (20cc) Popping Standard (Salted) Popcorn 1. Turn all switches ON. Note: When popping with coconut oil, be sure the oil is liquid. As a check, dispense oil into a measuring cup first (should be between 4 to 5 oz.), then use that oil for the first popping cycle. 2. When the kettle is ready (about 4 minutes), the Yellow Light and Audible Signal (if enabled) will turn ON. 3. Lift the kettle lid and pour in the popcorn and Flavacol in the premeasured amounts specified above. Close lid. 4. Press the “Red” Oil Dispense PB Switch to add oil. The proper amount of oil is pumped into the kettle. The Light and Signal will turn OFF. 5. When the corn has finished popping the Yellow Light and Audible Signal will turn ON, then gently dump the popcorn. Note: The signal “To Dump” was factory set based on Gold Medal Products Co. popcorn and oil. If, after 3 consecutive batches, the signal occurs before or after popping has stopped, the signal timing must be adjusted. Have a qualified service person adjust the signal to dump (see the Electronic Temperature Control section). Page 7 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN 6. On the final kettle of corn, turn the Kettle Heat Switch OFF just as the lids are forced open by the popping corn. This procedure saves electricity, since the kettle has plenty of heat, and helps eliminate smoke/odor from any oil residue that remains after popping has stopped. Note: When the Kettle Heat Switch is OFF, the machine will not beep on the last batch. 7. When finished popping, make sure KETTLE HEAT and KETTLE MOTOR switches are turned OFF. NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING CORN! Page 8 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Care and Cleaning DANGER Machine must be properly grounded to prevent electrical shock to personnel. DO NOT immerse in water. Always unplug the equipment before cleaning or servicing. 025_020314 WARNING To avoid serious burns, DO NOT touch the kettle while it is hot! 028_082715 Good sanitation practice demands that all food preparation equipment be cleaned regularly (only use non-toxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of advertising your product. Note: It is extremely important to follow all of the cleaning procedures, otherwise parts damage and equipment failure will result. The warranty does not cover parts that are damaged due to improper cleaning. Daily Kettle Cleaning Instructions CAUTION: A hot kettle will cause burns if you touch it with your hand. Allow kettle to cool at least 1 hour before attempting to clean. DO NOT use ice or water to cool down a hot kettle! Severe kettle damage will result! 1. When cool, wipe the outside of the kettle with a clean, soft cloth. DO NOT use oven cleaners or abrasive materials as they will damage the kettle. 2. Every night, mix Gold Medal’s Heat’n Kleen solution (Item No. 2095), 2 tablespoons per gallon of water. It is not necessary to use the entire gallon at once; only use enough to fill the kettle 1/2 inch deep. 3. Turn the kettle heat ON. When the water starts to boil, turn the kettle heat OFF. 4. Allow to cool for at least 1 hour, then dump the solution into a bucket and wipe the inside of the kettle with a clean cloth. Make sure all of the solution goes into the bucket; do not spill any in the interior of the machine. For an extra dirty kettle, the process may be repeated; or, after turning the kettle heat OFF, allow solution to sit in the kettle overnight. The next morning, dump the solution into a bucket and wipe the inside of the kettle with a clean cloth. 5. With the unit OFF and unplugged, wipe the kettle lead cord with a clean SLIGHTLY damp cloth. DO NOT get moisture into the kettle lead-in cord, severe damage will result. Page 9 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Daily Unit Cleaning Instructions 1. Turn machine OFF, unplug unit and allow it to cool before attempting to clean. 2. Clean all pans/accessories in order to sanitize them before each use. 3. Take a clean, SLIGHTLY damp cloth and wipe excess grease from glass and cabinet. 4. Wipe stainless steel parts with a clean cloth and cleaner designed for stainless steel, such as Gold Medal Watchdog Stainless Cleaner (Item No. 2088). DO NOT use oven cleaners or abrasive materials as they will damage parts of machine. 5. Clean glass panels with glass cleaner. Gold Medal Watchdog Glass Cleaner (Item No. 2588) is recommended. Ammonia cleaners will damage plastic doors/panels. Use only non-ammonia cleaners, such as Gold Medal Watchdog Glass Cleaner (Item No. 2588). Page 10 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Filter Cleaning Instructions Your popcorn machine is equipped with an efficient and durable filtration system. The filter should be cleaned every 1-2 weeks to maintain maximum efficiency. Follow the steps below for proper filter cleaning: Step 1: The filter is located on the inside of the popcorn machine directly above the popping kettle. Step 2: Remove the filter by gripping the filter itself and pulling straight down. Step 3: Clean the filter in warm soapy water and allow to dry overnight. Replace the filter by putting it into the slot and pushing upward. Make sure the filter frame is flush with the roof of the machine (as shown above). Page 11 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN MAINTENANCE INSTRUCTIONS DANGER Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle. 008_051514 DANGER Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Any alterations to this equipment will void the warranty and may cause a dangerous condition. This appliance is not intended to be operated by means of an external timer or separate remote-control system. NEVER make alterations to this equipment. Read the Installation, Operating, and Maintenance Instructions thoroughly before installing, servicing, or operating this equipment. 014_020416 WARNING No user serviceable parts inside. Refer servicing to qualified service personnel. 011_051514 CAUTION THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE OPERATOR. 027_010914 Page 12 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Electronic Temperature Control (Domestic) Operation The temperature control is factory set to stop the power to the kettle when the thermocouple reaches setpoint. This is also the ideal point to dump the popped corn out of the kettle. On the first start-up, this is the ideal time to load the corn and oil. Therefore, if the Kettle Heat Switch is turned ON and the buzzer is sounding, one of the following actions should be taken: • Load the corn and oil or • Dump the popped corn from the kettle or • Turn OFF the Kettle Heat Switch if you are finished popping corn. Adjustment of Electronic Control This unit has an electronic kettle control with 2 thermocouples (TC), one for control and one for limit. There are no mechanical thermostats in this kettle. There are (4) factory adjustments on the control: 1. Control Setpoint Temperature – This is factory set, DO NOT adjust. 2. Signal to Dump – If you want the signal to dump to be a little sooner or later, you can adjust the Kettle Dump potentiometer (see image below). Turn clockwise (CW) to signal sooner, counterclockwise (CCW) to signal later. 3. The patented Overshoot circuit is tuned for the kettle, DO NOT adjust this potentiometer. 4. The Audible Signal to Dump has three options; full volume, half volume, no sound (yellow light only). Adjustments are made by jumper positions (see image below). The unit is shipped with full volume.

It does not matter which TC goes Audible Signal to Dump

to A or B; it DOES matter that the yellow leads go to the positive terminals. Remove this jumper for no sound. Remove this jumper for lower volume. Control Setpoint Temperature This is factory set, DO NOT ADJUST. Overshoot – This is factory set, DO NOT ADJUST. Kettle Dump - This is factory set to signal when kettle is ready to dump. Turn CW to signal sooner; CCW to signal later. ONLY make small adjustments if needed. L2 Neutral Lead L1 Hot Lead Jumper Wire A & B for 120 VAC

Page 13 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Electronic Temperature Control (Export) Operation The temperature control is factory set to stop the power to the kettle when the thermocouple reaches setpoint. This is also the ideal point to dump the popped corn out of the kettle. On the first start-up, this is the ideal time to load the corn and oil. Therefore, if the Kettle Heat Switch is turned ON and the buzzer is sounding, one of the following actions should be taken: • Load the corn and oil or • Dump the popped corn from the kettle or • Turn OFF the Kettle Heat Switch if you are finished popping corn. Adjustment of Electronic Control This unit has an electronic kettle control with 2 thermocouples (TC), one for control and one for limit. There are no mechanical thermostats in this kettle. There are (4) factory adjustments on the control: 5. Control Setpoint Temperature – This is factory set, DO NOT adjust. 6. Signal to Dump – If you want the signal to dump to be a little sooner or later, you can adjust the Kettle Dump potentiometer (see image below). Turn clockwise (CW) to signal sooner, counterclockwise (CCW) to signal later. 7. The patented Overshoot circuit is tuned for the kettle, DO NOT adjust this potentiometer. 8. The Audible Signal to Dump has three options; full volume, half volume, no sound (yellow light only). Adjustments are made by jumper positions (see image below). The unit is shipped with full volume.

It does not matter which TC goes Audible Signal to Dump

to A or B; it DOES matter that the yellow leads go to the positive terminals. Remove this jumper for no sound. Remove this jumper for lower volume. Control Setpoint Temperature This is factory set, DO NOT ADJUST. Overshoot – This is factory set, DO NOT ADJUST. Kettle Dump - This is factory set to signal when kettle is ready to dump. Turn CW to signal sooner; CCW to signal later. ONLY make small adjustments if needed. L2 Neutral Lead L1 Hot Lead Jumper Wire C for 230 VAC

Page 14 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN ORDERING SPARE PARTS 1. Identify the needed part by checking it against the photos, illustrations, and/or parts list. 2. Use only approved replacement parts when servicing this unit. 3. When ordering, please include part number, part name, and quantity needed. 4. Please include your model number, serial number, and date of manufacture (located on the machine nameplate/data plate) with your order. 5. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 Or, place orders by phone or online: Phone: (800) 543-0862 (513) 769-7676 Fax: (800) 542-1496 (513) 769-8500 E-mail: info@gmpopcorn.com Web Page: gmpopcorn.com Page 15 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Kettle Assembly – Parts Breakdown 3 2 1 4 14 15 56 17 16 10 9 8 18 4 1213 1 11

7

Page 16 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Kettle Assembly – Parts List Item Part No. Model(s) Part Description Qty. 1 55176 ALL KETTLE LEAD ASSY 1 2 41120 ALL REAR LID 1 3 41123 ALL FRONT LID 1 4 41081 ALL KETTLE SHELL ASSEMBLY 1 5 47110 ALL KNOB DUMP HANDLE 1 6 47691 ALL 1/4-20 X 1 THUMB SCREW 4 7 41598 ALL KETTLE GASKET 1 8 46311 ALL 1/4-20 SERRATED LOCK NUT 12 9 67890 ALL TRANSFER PLATE 1 10 67894 ALL ELEMENT CLAMP 6 67014 55166E TUBULAR HEAT ELEMENT 11 167014EX 55166XE 1550W HEAT ELEMENT 12 67943 ALL #8-32 TOP LOCK NUT 2 13 47393 ALL JUNCTION BOX 1 14 47707 ALL DUMP HANDLE 1 15 41730 ALL WOODRUFF KEY #3 1/8X1/2 1 16 47662 ALL 5/16-18 X 3/8 SQ HD SCREW 2 17 61167 ALL THREADED BLOCK 2 18 67892 ALL KETTLE WELD 1 Page 17 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN

Agitator Assembly 12

3 9

5 6 7 8, 4 5 Item Part No. Model(s) Part Description Qty. 1 43434 ALL AGITATOR BEARING HUB 1 2 47106 ALL NEEDLE BEARING 1 3 47060 ALL SPUR GEAR 1 4 47751 ALL SET SCREW 1/4-20 X 3/16 2 5 41093 ALL AGITATOR SHAFT ASSEMBLY 1 6 41239 ALL OIL TUBE WITH FUNNEL 1 7 41086 ALL CROSSBAR ASSEMBLY 1 8 47326 ALL SET COLLAR 1/2ID X 7/8OD 2 9 41742 ALL SET SCREW #10-32 X 3/16 1 Page 18 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Cabinet Exterior 12 7, 8 1 2, 3 6 4 10, 11 5 9 13 Item Part No. Model(s) Part Description Qty. 1 41345 ALL DOME ASSEMBLY 1 2 41350 ALL MALE HINGE SHORT RIGHT 2 3 41351 ALL FEMALE HINGE LONG LEFT 2 4 41014 ALL ASTRO DOOR 2 5 41017 ALL DROP PANEL ASSEMBLY 1 6 41013 ALL DOOR KNOB 2 7 47561 ALL MAGNETIC CATCH 1 8 41340 ALL MAGNETIC CATCH BRACKET 1 9 41838 ALL OLD MAID PAN 1 10 41349 ALL MALE HINGE SHORT LEFT 2 11 41352 ALL FEMALE HINGE LONG LEFT 2 12 67848 ALL INSPECTION COVER 1 13 41282 ALL CASE BOTTOM RUBBER FEET 4 Page 19 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Cabinet Interior – Hanger Assembly 1 2 5 3

12 4, 8 10, 11 9 6 7

Item Part No. Model(s) Part Description Qty. 1 17451 ALL ROCKER PUSH BUTTON BOX 1 2 17450 ALL 5 HOLE SWITCH BOX 1 3 69850 ALL BOX FILTER (not shown) 1 47176 2023E 65W COATED REFLECTOR FLOOD 4 1 41979EX 2023XE-XEN 75W HALOGEN FLOOD 5 67194 ALL GEAR BLOCK ASSEMBLY 1 6 47262 ALL HANGER ARM FRONT 1 7 47228 ALL HANGER ARM REAR 1 8 47047 ALL LAMP HOLDER 1 9 47060 ALL SPUR GEAR 1 10 47225 ALL SET COLLAR 2 11 47226 ALL SET SCREW 2 12 62666 ALL FILTER SPRING CLIPS 2 Page 20 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Corn Pan and Blower Assembly – Parts Breakdown 11 10 9

2 14

1 7 8 3

13 12 4 5 6 15 Page 21 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Corn Pan and Blower Assembly – Parts List Item Part No. Model(s) Part Description Qty. 47356 2023E 115V MOTOR WARMER 1 1 47669 2023XE-XEN 230V MOTOR WARMER 2 61021 ALL FEMALE CORD 1 3 61020 ALL MALE CORD 1 4 41113 ALL BLOWER WHEEL 1 47355 2023E 120V, 400W HEAT ELEMENT 5 1 47732 2023XE-XEN 240V, 400W HEAT ELEMENT 6 47385 ALL THERMOSTAT WARMER 1 47563 2023E WARMER BLOWER ASSEMBLY 7 147563EX 2023XE-XEN WARMER BLOWER ASSEMBLY 8 41838 ALL OLD MAID PAN 1 44073 2023E STRAIN RELIEF 2 9 82220 2023XE-XEN STRAIN RELIEF 2 10 47358 ALL RUBBER PAD 1 11 47985 ALL TOP MOUNTING ANGLE 1 12 47542 ALL TUNNEL COVER WELD ASSEMBLY 1 13 47545 ALL WARMER CHASSIS ASSEMBLY 1 14 41879 ALL CORNER COVER 1 15 41102 ALL BOTTOM CORN PAN 1 Page 22 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Dome Interior View – Parts Breakdown 12 14 15 2 1 3 4 10, 13 16 5 9 6 8 17 7 11 18 19 For Power Cord (not shown), see Parts List Page 23 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Dome Interior View – Parts List Item Part No. Model(s) Part Description Qty. 1 47047 ALL LAMP HOLDER 1 48018 2023E 120V 60CY EXAUST BLOWER 2 2 48037 2023XE-XEN 220V 50CY EXAUST BLOWER 47038 2023E 120V KETTLE DRIVE MOTOR 3 1 47067 2023XE-XEN 230V KETTLE DRIVE MOTOR 4 41001 ALL TEMPERATURE CONTROL 1 55219 2023E 30A DPST 120V RELAY 5 2 55219EX 2023XE-XEN RELAY, 30A DPST 240V 62306 2023E KETTLE RECEPTACLE ASSEMBLY 6 1 62306EX 2023XE-XEN RECEPTACLE ASSY 47364 2023E 15A CIRCUIT BREAKER 7 1 48659 2023XE-XEN 10A CIRCUIT BREAKER 8 47208 ALL TERMINAL BLOCK 1 9 89087 ALL 240VAC TRANSIENT FILTER 2 41640 2023E 8W 120V FOIL ELEMENT 10 1 41640EX 2023XE-XEN 8W 230V FOIL ELEMENT 11 47199 ALL BLOWER PLUG AND CORD 2 49480 2023E LIGHT SHIELD CONICAL 12 1 49584 2023XE-XEN RECESSED LIGHT COVER 13 41047 ALL OIL LINE TUBING 5.42' 14 67841 ALL EXHAUST BLOWER BOX 1 15 41526 ALL DOME SPACER 2 16 67842 ALL TEMPRATURE CONTROL MOUNT PLATE 1 17 77475 ALL MOUNT PLATE 1 47601 2023E POWER SUPPLY CORD 18 1 42369 2023XE-XEN EXPORT POWER SUPPLY CORD 19 41499 ALL WIRE HARNESS OIL PUMP 1 47026 2023E STRAIN RELIEF (Not Shown) 20 1 41735 2023XE-XEN STRAIN RELIEF (Not Shown) 21 47290 2023E POWER SUPPLY RECPT (Not Shown) 1 22 47377 2023E POWER SUPPLY RECPT COVER (Not Shown) 1 Page 24 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Lighting Assembly – Parts Breakdown

1 2

11 3

5 10 9

4 8 6 7 9 11

Page 25 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN Lighting Assembly – Parts List Item Part No. Model(s) Part Description Qty. 1 41301 LED LED POPCORN SIGN 1 2 55379 LED 1W LED STRIP 2 3 55394 LED 24VDC 20W POWER SUPPLY 1 4 67420 NEON END CAP (Not Shown) 2 5 67417 NEON NEON SIGN COVER 1 6 55231 NEON 12V POWER SUPPLY 1 7 67517 NEON NEON SIGN BOTTOM BRACKET 2 8 45003 NEON NEON SIGN ASSEMBLY 1 9 67438 NEON EXTRUSION 2 10 69708 NEON LED POPCORN SIGN 1 11 47562 ALL WIRE HARNESS 1 Page 26 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN WIRING DIAGRAM Model 2023E Page 27 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN WIRING DIAGRAM Model 2023XE, 2023XEN Page 28 gmpopcorn.com Astro Pop 16oz Model No. 2023E, 2023XE, 2023XEN WARRANTY Gold Medal Products Co. warrants to the original purchaser each item of its manufacture to be free of defects in workmanship and material under normal use and service. Gold Medal Products Co.’s obligation under this warranty is limited solely to repairing or replacing parts, f.o.b. Cincinnati, Ohio, which in its judgment are defective in workmanship or material and which are returned, freight prepaid, to its Cincinnati, Ohio factory or other designated point. Except for “Perishable Parts” on specific machines, the above warranty applies for a period of two (2) years from the date of original sale to the original purchaser of equipment when recommended operating instructions and maintenance procedures have been followed. These are packed with the machine. Parts warranty is two (2) years, labor is six (6) months. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. In no event shall Gold Medal Products Co. be liable for special, incidental or consequential damages. No claim under this warranty will be honored if the equipment covered has been misused, neglected, damaged in transit, or has been tampered with or changed in any way. No claim under this warranty shall be honored in the event that components in the unit at the time of the claim were not supplied or approved by Gold Medal Products Co. This warranty is effective only when electrical items have been properly attached to city utility lines only at proper voltages. This warranty is not transferable without the written consent of Gold Medal Products Co. The term “Original Purchaser” as used in this warranty shall be deemed to mean that person, firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS CO., or their authorized distributor for the equipment. THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS CO. AT 1-800-543-0862 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR REPLACEMENT OF PARTS. NOTE: This equipment is manufactured and sold for commercial use only. 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA gmpopcorn.com Phone: (800) 543-0862 Fax: (800) 542-1496 (513) 769-7676 (513) 769-8500 © 2016 – The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website display, without its express written consent. Page 29 gmpopcorn.com


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply