FINGERS TEENYCLICKS (01) PDF DOCUMENT

1. Do not place the keyboard near the heat sources such as radiators, fire, stoves, light candles and other apparatus that produce heat.

2. Keep it dry. Do not allow the keyboard to get wet or exposed to moisture/rain, else it increases the occurrences of fire or shock.

3. Use only those accessories supplied by FINGERS.

4. Refer all servicing to qualified personnel. Servicing is required when the keyboard has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

This device may contain small parts which may be a choking hazard to children under 3 years. Keep small parts away from children.

1. iPad, iPhone – All versions

2. Bluetooth®-enabled PCs or Laptops with Windows® 8,10,11 or higher system

3. Bluetooth®-enabled iMac/MacBooks with macOS x 10.2.8 or above (Kindly note that some exceptions may apply. This keyboard may not be compatible with Mac minis)

4. Smartphones or Tablets with Android 3.0 and above (with Bluetooth® HID profile)

5. Windows® Mobile 5.0 and above

1 x FINGERS TeenyClicks

1 x Quick Start Guide

1 x Brand Note

– Open the BT Keyboard battery Cover, put in two AAA dry batteries and then slide the power switch to “ON”. The LED light twinkles for 3 seconds and crush out.

– Press the “Connect” button for two seconds. The LED light blinks and the device into searching and matching status.

– On the start page of the desktop/laptop, open “Settings” and go to “Bluetooth®”.

– Make sure that Bluetooth® is enabled on your device.

– Find the device list and select “FINGERS TeenyClicks”. Click on the next step.

– The Bluetooth® keyboard has been connected successfully to the PC device.

– Open “Settings” on an Android phone and open “Bluetooth®”.

– Find the device list and select “FINGERS TeenyClicks”.

– The Bluetooth® keyboard has been connected successfully to the device.

– Open “Settings” in iPad/iPhone and go to “Bluetooth®”.

– Find the device list and select “FINGERS TeenyClicks”.

– The Bluetooth® keyboard has been connected successfully to the device.

Long press [Fn] and combination with [F1-F12] keys.

You can pair up to 3 devices and seamlessly switch among them. Only one connection will be active at a time.

Fn + BT1 >> Device 1 (Example: PC/Laptop)

Fn + BT2 >> Device 2 (Example: Tablet)

Fn + BT3 >> Device 3 (Example: Mobile Phone)

– After pairing for the first time, your device will connect to the keyboard automatically when switching on the keyboard.

– Once paired with a device, the keyboard remembers the connected devices.

– Just switch ON the Bluetooth of these devices and the keyboard will get auto connected.

In case of connection failure, delete the pairing record from your device, and try the pairing procedures again.

1. Use a soft cloth to clean the surface.

2. Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia or abrasives.

3. Do not allow any liquid to enter into any of the openings.