FREE ENGLISH ETAC BALDER JUNIOR (01) PDF USER GUIDE
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF USER MANUAL
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF OWNER GUIDE
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF OWNER MANUAL
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF REFERENCE GUIDE
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF REFERENCE MANUAL
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ETAC BALDER JUNIOR (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ETAC BALDER JUNIOR (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
ETAC BALDER JUNIOR (01) PDF SUMMARY:
What is the purpose of Balder wheelchairs?
Balder wheelchairs are multifunctional electric wheelchairs that are very comfortable and highly flexible in terms of functionality. They combine the qualities of an outdoor chair with the flexibility of an indoor model and are designed for daily use in all situations.
What should be done to make the chair ready for use?
It is recommended to make sure the chair is adjusted to meet individual needs before use. Each chair has simple control and adjustment options to help the user sit as comfortably as possible. The technical description provides more information about the control and adjustment options.
Where is the unique serial number located on Balder wheelchairs?
The unique serial number is located on the chassis, between the wheels.
Who should you contact if you require assistance with your Balder wheelchair?
You should contact your local dealer or the Assistive Device Centre in your district if you need any assistance. You can also refer to the troubleshooting list.
What does the “DANGER” hazard symbol mean?
The “DANGER” hazard symbol indicates that if instructions are not followed, staff WILL be seriously injured.
What does the “WARNING” hazard symbol mean?
The “WARNING” hazard symbol indicates that if instructions are not followed, machinery WILL be seriously damaged.
What does the “NOTE” hazard symbol mean?
The “NOTE” hazard symbol indicates that if instructions are not followed, staff MAY be injured or machinery or the environment MAY be damaged.
What should be done with the chair in terms of the environment?
These chairs must be sorted at source in accordance with applicable regulations on waste. Batteries and electronic equipment in particular must be taken into account.
How many people are Balder wheelchairs designed to transport?
Balder wheelchairs are designed to transport one – 1 – person.
Is it permissible to allow another person to ride on the Balder wheelchair?
No, never allow anyone else to ride with you, either behind you or on the footrests.
What should you do when using the wheelchair on uneven, wet, or slippery surfaces?
Take care when using the wheelchair on uneven, wet, or slippery surfaces (gravel, loose sand/earth, wet grass, etc.). These are conditions in which you could overturn or lose control of your chair. Be aware that negotiating obstacles can involve a risk of overturning.
How deep of water should be avoided while using the wheelchair?
Avoid traveling through water more than 7 cm deep. This may damage the electric motor and systems, as well as the battery.
What happens when traveling on slopes in excess of 6 degrees?
When traveling on slopes in excess of 6 degrees, remember that this will affect the stability of the chair and there is a risk of the chair overturning.
What happens when the wheelchair drives downhill?
When the wheelchair drives downhill, the motor generates energy, which charges the battery.
What happens if the battery is already fully charged while the wheelchair drives downhill?
If the battery is already fully charged, it cannot accept the generated energy anymore. When this happens the battery voltage becomes too high, which can result in damage to either the controller or the batteries. The controller will try to prevent this damage and if needed it will ultimately force the vehicle to halt abruptly.
How can you ensure a smooth journey downhill?
- Select a drive profile that has a lower maximum speed.
- If your vehicle has lights, turn them on. The lights will use energy, and as a result less energy will go to the batteries. This allows you to go downhill at a slightly faster speed than with the lights off.
- When the LEDs of the battery gauge start to flash as a warning that the batteries are overcharging, do not ignore this warning. Drive at a lower speed. If you do not slow down, you will damage the batteries. When your speed has been too fast for too long, the vehicle will halt to prevent more damage.
What should you do if you often need to go downhill with fully charged batteries?
If you often need to go downhill with fully charged batteries, ask your installer/technician/therapist to optimize the program values of your chair for your situation.
What are the different models of Balder wheelchairs?
The different models of Balder wheelchairs are Balder Junior, Balder Junior Stand up, Balder Finesse, Balder Finesse Stand up, and Balder Liberty.
What is the width of the Balder Finesse wheelchair?
The width of the Balder Finesse wheelchair is 64 cm.
What is the length without foot support of the Balder Finesse wheelchair?
The length without foot support of the Balder Finesse wheelchair is 88.3 cm.
What is the length with foot support, fully retracted, of the Balder Finesse wheelchair?
The length with foot support, fully retracted, of the Balder Finesse wheelchair is 113 cm.
What is the seat width of the Balder Finesse wheelchair?
The seat width of the Balder Finesse wheelchair is 40 – 48 cm.
What are the seat depth measurements of the Balder Finesse wheelchair?
The seat depth measurements of the Balder Finesse wheelchair are 40 – 52.5 cm.
What is the seat height of the Balder Finesse wheelchair?
The seat height of the Balder Finesse wheelchair is 38 – 82 cm.
What is the back height of the Balder Finesse wheelchair?
The back height of the Balder Finesse wheelchair is 44 – 62 cm.
What is the height beneath the chassis of the Balder Finesse wheelchair?
The height beneath the chassis of the Balder Finesse wheelchair is 7 cm.
What is the axle spacing of the Balder Finesse wheelchair?
The axle spacing of the Balder Finesse wheelchair is 61.5 cm.
What is the weight of the Balder Finesse wheelchair?
The weight of the Balder Finesse wheelchair is 130 kg.
What is the maximum user weight for the Balder Finesse wheelchair?
The maximum user weight for the Balder Finesse wheelchair is 120 kg.
What is the back angling range for the Balder Finesse wheelchair?
The back angling range for the Balder Finesse wheelchair is 0° to 90°.
What is the tilt range for the Balder Finesse wheelchair?
The tilt range for the Balder Finesse wheelchair is -15° to 45°.
What is the foot support angling range for the Balder Finesse wheelchair?
The foot support angling range for the Balder Finesse wheelchair is 0° to 90°.
What batteries are used in the Balder Finesse wheelchair?
The batteries used in the Balder Finesse wheelchair are Sonnenschein A-500C GF12044Y.
What is the maximum speed of the Balder Finesse wheelchair?
The maximum speed of the Balder Finesse wheelchair is 7 km/h.
What is the travel range of the Balder Finesse wheelchair?
The travel range of the Balder Finesse wheelchair is up to 50 km.
What are the dimensions of the front wheels of the Balder Finesse wheelchair?
The dimensions of the front wheels of the Balder Finesse wheelchair are 3 x 8".
What are the dimensions of the rear wheels of the Balder Finesse wheelchair?
The dimensions of the rear wheels of the Balder Finesse wheelchair are 2.5 x 3".
What is the air pressure for the front wheels of the Balder Finesse wheelchair?
The air pressure for the front wheels of the Balder Finesse wheelchair is 30 psi Puncture-free.
What is the air pressure for the rear wheels of the Balder Finesse wheelchair?
The air pressure for the rear wheels of the Balder Finesse wheelchair is 50 psi Puncture-free.
How are the electric functions of Balder wheelchairs controlled?
The electric functions of the chair are controlled by joystick or function switch.
What type of drive system do the Balder Finesse and Balder Junior wheelchairs have?
The Balder Finesse and Balder Junior are electric wheelchairs with front wheel drive.
What type of drive system does the Balder Liberty wheelchair have?
The Balder Liberty has rear wheel drive.
What are the key components of a Balder wheelchair as shown in Figure 1?
The key components of a Balder wheelchair are: 1. Neck support, 2. Back, 3. Joystick, 4. Seat, 5. Leg pads, 6. Footplates, 7. Battery (located beneath the chassis), 8. Armrests.
What should you do if you need to remove or disassemble equipment that may affect the operation and/or functions of the chair?
Do not remove or disassemble equipment which may affect the operation and/or functions of the chair. Contact authorized personnel if you require assistance.
How is the joystick programmed?
The joystick is programmed by the manufacturer depending on the specifications of the chair.
What do the LEDs on the Dolphin joystick indicate about the battery’s capacity?
When the battery is at full capacity, 3 red, 4 yellow, and 3 green LEDs will be on. These will gradually go out as the remaining battery capacity is reduced.
What do the LEDs on the Joystick G90 indicate about the battery’s capacity?
When the battery is at full capacity, 2 red, 2 yellow, and 2 green LEDs will be on. These will gradually go out as the remaining battery capacity is reduced.
How is the operating program selected?
The operating program is selected by pressing the program selector switch.
What is the purpose of operating program 1?
Operating program 1 is designed with an emphasis on quiet movements and low speed, and is typically used where there is not much space and precise movement is important.
What is the purpose of operating program 2?
Operating program 2 is very similar to program 1, but with slightly faster reactions to joystick movements.
What is the purpose of operating program 3?
Operating program 3 is defined according to average values and is ideal for the first time using the chair.
What is the purpose of operating program 4?
Operating program 4 is intended to be used as standard once you have learned how the chair reacts and feel secure in all situations. This program is created to allow rapid feedback to your control operations, maximum speed, and rapid application of the motor brake.
What is the purpose of operating program 5?
Operating program 5 is designed for outdoor operation and gives maximum forward propulsion without being too sensitive to minor corrections.
Where are the wheelchair attachment points located?
There are 2 attachment points in the front and 1 ring at the rear of the wheelchair.
How can the attendant control be fitted?
- Place the attendant control in the groove at the back of the chair.
- Tighten the stop screw.
- Connect the cables for the joystick and control panel.
- Change the angle of the attendant control by pulling out the switches and adjusting it. Release the switches when the required angle has been attained.
How can the attendant control be removed?
- Remove by loosening the stop screw.
- Disconnect the cables to the joystick and control panel.
- Pull the attendant control out of the groove.
What does the swing away for the joystick do?
The swing away makes the positioning and accessibility of the joystick more flexible.
How can the angle of the armrests be adjusted on Balder Finesse and Liberty models?
- Undo the screws on the back cover.
- Remove the back cover.
- Loosen the nut and adjust the screw to change the angle of the armrest tubes, and also the height.
- Do the same for the armrest on the other side.
- Tighten the screws, place the back cover in position.
How can the height of the armrests be adjusted on Balder Junior models?
- Undo the locking screw beneath the armrest.
- Push the armrest up or down to adjust the height.
- Tighten the locking screw.
How can the armrest pads be adjusted on Balder Finesse and Liberty models?
- Undo the screws so that the pad is loosened from the fixing bracket.
- Push the pad into the required position.
- Tighten the screws.
How can the armrest pads be adjusted on Balder Junior models?
- Undo the screws so that the cushion is loosened from the fixing bracket.
- Push the pad into the required position.
- Tighten the screws.
How can the width between the armrests be adjusted on Balder Junior models?
- Loosen the locking screw.
- Adjust the bracket which holds the armrest at the required width.
- Tighten the locking screw.
- Do the same for the other armrest.
How do you adjust the length of electric footrests?
- Loosen the setting screws at the back of the brackets for the footrest plates.
- Adjust to the required height.
- Tighten the setting screws.
- Test the footrest function once the footrests have been adjusted by moving them to their outermost positions.
How do you adjust the length of manual footrests?
- Remove the lock screw.
- Adjust the lower part of the foot support to the required position.
- Put back the locking clip.
- Repeat the same procedure for the other foot support.
How do you adjust the angle of electric footrest plates?
- Loosen the nuts.
- Turn the adjusting screw counterclockwise for a steeper angle, or clockwise for a less steep angle.
- Tighten the nut.
How do you adjust the angle of manual footrest plates?
The angle of the footrest plate is adjusted undoing the screws on the respective footrest plates and moving the footrest plate to the required position.
How is the angle of electric foot supports adjusted?
The angle of electric foot supports is adjusted using a joystick.
How is the angle of manual foot supports adjusted?
- Remove the locking clip beneath the seat.
- Move the foot supports to the correct position.
- Tighten the locking clip.
- Repeat the same procedure for the other foot support.
How do I adjust the width between the foot supports?
- Loosen the attaching screw.
- Move the foot supports sideways.
- Tighten the attaching screw.
- Repeat the same procedure for the other foot support.
How do I remove and pivot out the foot supports?
The foot support can be pivoted out by lifting it up from the attaching bracket and pivoting it out. The foot support can be lifted off by lifting it up and off the attaching bracket.
How do I adjust the joystick?
- Undo the screws (1 and 2).
- Adjust the location of the bracket according to how far forward you want the joystick to sit on the armrest.
- Tighten the screws (1 and 2). To angle the joystick, undo the screw (2) using a star grip.
How do I adjust the swing away for the joystick?
To tighten the swing away:
- Move the joystick carefully while tightening the hex screw (1).
- Stop when you feel the joystick becoming fixed in position.
To adjust the height of the swing away:
- Clamp the joystick.
- Loosen the screw (1).
- Raise or lower the joystick.
- Tighten the screw (1).
To adjust the depth of the swing away:
- Clamp the joystick.
- Loosen the screws (2).
- Move the joystick / swing away to the required position.
- Tighten the screws (2).
To adjust the stop point:
- Undo the two hex screws (1), one on either side.
- Move the joystick / swing away to the required position.
- Tighten the screws.
How do I adjust the headrest?
- Loosen the screw (1) and adjust the headrest to the correct height.
- Move the headrest to the correct depth.
- Tighten the screws (2) and (3) if the headrest seems loose.
- Adjust the headrest pad by bending the pad to the required angle in order to achieve the required lateral stability.
How do I activate the wheelchair?
For Balder Junior and Finesse:
- Make sure that the release handles are in Operation position (1).
- Press the On/off switch (2).
- Activate the key function (3) if the chair is fitted with this by moving the magnetic key over the key symbol on the joystick.
For Balder Liberty:
- Make sure that the release handles are in Operation position (1).
- Press the On/off switch (2).
- Activate the key function (3) if the chair is fitted with this by moving the magnetic key over the key symbol on the joystick.
How do I deactivate the wheelchair?
- If the chair is fitted with a key function, move the magnetic key over the key symbol on the joystick to deactivate the display and wheelchair.
- Switch off the power by pressing the On/off button.
How do I operate the wheelchair?
- Select an operating program by pressing the program selector switch.
- Control the chair by moving the joystick.
- The more gently you move the joystick, the more slowly the chair will react.
- When you release the joystick, it will automatically return to the default position and the chair will stop.
How do I operate the attendant control?
- Use the panel (1) for the electrical functions such as seat raising, seat tilt and back angle.
- Push the ring (2) down to move the chair forwards, and lift it up to move it backwards.
- Pivot the wheelchair by moving the steering gear (3) to the right or left.
- Control the speed by turning the potentiometer (4).
- Use the rotary switch (5) to select whether the user or the escort is to control the chair.
How do I use the seat tilt function with the Dolphin joystick?
- Press the seat tilt button.
- Move the joystick forwards and back to change the angle of the seat unit.
How do I use the seat tilt function with the Joystick G90?
- Scroll through to the seat functions using the ASK button.
- Move the joystick to the right or left until the symbol shows on the display.
- Move the joystick forwards and back to change the angle of the seat unit.
How do I use the seat back function with the Dolphin joystick?
- Press the seat back angle button.
- Move the joystick forwards and back to change the angle of the back.
How do I use the seat back function with the Joystick G90?
- Scroll through to the seat functions using the ASK button.
- Move the joystick to the right or left until the symbol shows on the display.
- Move the joystick forwards and back to change the angle of the back.
How do I use the left footrest / length compensation function with the Dolphin joystick?
- Press the left footrest button.
- Move the joystick forwards and back to change the position of the left footrest.
How do I use the left footrest / length compensation function with the Joystick G90?
- Scroll through to the seat functions using the ASK button.
- Move the joystick to the right or left until the symbol shows in the display.
- Move the joystick forwards and back to change the position of the left footrest.
How do I use the right footrest / footrest angle function with the Dolphin joystick?
- Press the right footrest button.
- Move the joystick forwards and back to change the position of the right footrest.
How do I use the right footrest / footrest angle function with the Joystick G90?
- Scroll through to the seat functions using the ASK button.
- Move the joystick to the right or left until the symbol shows on the display.
- Move the joystick forwards and back to change the position of the right footrest.
How do I use the seat raise function with the Dolphin joystick?
- Press the seat raise button.
- Move the joystick forwards and back to raise and lower the seat.
How do I use the seat raise function with the Joystick G90?
- Scroll through to the seat functions using the ASK button.
- Move the joystick to the right or left until the symbol shows on the display.
- Move the joystick forwards and back to raise and lower the seat.
How do I use the stand up function?
- Move the seat and back to the required starting position.
- Move the footrest to the required starting position.
- Activate the seat raise function.
- Raise the seat until you are at the correct height, indicated by a yellow light on the vertical function panel.
- Push the lower part of the lock pin up, so that it sticks straight out. Thread the buckle of the knee brace cushion into the fixing bracket. Push the lock pin back, so that it remains straight up, with the broadest part of the lock pin facing down. The knee brace cushion must be tight below the knee.
- Put on the breast belt (3) and tighten it.
- Activate the stand up function by holding down the stand up function switch (4).
- Move the chair to the upright position, the support legs (5) will automatically be lowered when the seat angle exceeds 15 degrees. A green light (6) comes on when the support legs are activated.
How do I return to the starting position from the stand up position?
- Press and hold down the switch (7) to deactivate the standing position and return to the starting position.
What should I do if the chair stops?
Check the automatic fuse. If you need to push the chair, it can be disconnected. You can also contact your dealer for assistance.
Where is the automatic fuse located on the Junior and Finesse models?
The automatic fuse is located on the chassis next to the left rear wheel.
Where is the automatic fuse located on the Liberty model?
The automatic fuse is located on the back of the chair.
How do I check the automatic fuse?
Push in the automatic fuse if it has been tripped.
When should I not disconnect the chair?
The chair must not be disconnected on a slope, as this may cause it to roll away.
What should I do before disconnecting the chair?
The chair should be switched off when it is disconnected.
Why do the drive motors need to be disconnected?
If you need to move the chair without using the electronics, the drive motors have to be disconnected.
Where are the disconnection switches located on the Junior and Finesse models?
The disconnection switches are located at the front of the wheelchair.
Where are the disconnection switches located on the Liberty model?
The disconnection switches are located at the back of the wheelchair.
How do I disconnect the wheels for the Liberty model?
Move the two switches down until they lock in position.
How do I connect the wheels for operation for the Liberty model?
Move the two switches up until they lock in position.
What is important to remember when transporting the chair in a car?
Always make sure your chair is secured when you transport it. Always ensure that the attaching equipment you are using is approved for transporting your chair in a car.
What should be used as attachment points for straps?
The fixing rings on the chair must be used as the attachment points for straps.
How do I secure the chair using manual straps?
- Attach and tighten the front straps to the attachment points at the front of the wheelchair. There is one strap on either side.
- Attach and tighten the rear straps to the fixing ring at the back of the wheelchair.
- Check that the straps are tightened properly so that the chair does not move about.
- Push down the locking catch to lock the chair in this position.
What should I do if the clamp down unit does not release?
A flashing red light will be displayed for 90 seconds after five attempts and the clamp down unit will remain inactive for this period in order to prevent the release solenoid overheating. The clamp down unit will be ready for use again after 90 seconds.
Is there a manual release for the clamp down unit?
Yes, there is a manual release. This is located on the back of the chair and is a gilted switch.
What should I ensure when using the clamp down unit?
Make sure that armrests, wheels and other components do not prevent full body contact. There must be full body contact with the 3-point strap. Always use the original fixing equipment, in addition to the equipment that has been mounted on the chair.
How do I attach the chair to the spigot?
- Roll the chair into the spigot.
- When the chair is in the correct position, a green light will appear in the car bracket panel.
How do I remove the chair from the spigot?
- Hold down the switch on the switch panel until a green light starts flashing.
- Move your hand to the joystick. A red light comes on when the chair is released.
- Remove the chair from the spigot within three seconds. The indicator lamp goes out once the chair is free of the spigot.
What happens if the chair is not removed from the spigot within three seconds?
The chair will be locked back into the car bracket and the green light will come on if the chair is in the correct position. You may need to repeat the process.
What is important to remember about Balder wheelchairs when transporting by air?
Balder wheelchairs are supplied in many specially adapted variants, so equipment may be fitted which has to be removed in addition to what is described. The batteries are approved for transportation by air. If a situation occurs where it is necessary to disconnect the power supply from the battery poles, see section 8.2.5 on battery removal.
What are the preparations that need to be done prior to air transportation?
- Use the electrical functions on the control panel and move the electric seat tilt so that the seat pad is more or less horizontal.
- Move the electric back up to approx. 110 degrees to the seat pad.
- Move the electric footrests upwards and inwards as far as possible without them catching on the floor.
- Move the electric seat raise as far down as possible.
- Switch off the electrical functions using the on/off button on the control panel.
How often should the batteries be charged if the chair is stored for a long time?
The batteries must be fully charged once a month.
How should the Balder wheelchair be stored?
Your Balder wheelchair must be kept dry, protected from the elements and preferably kept indoors. If you store your chair for any length of time without it being used, the batteries must be disconnected.
What is the recommended service interval for the chair?
After every 2500 hours of use / once a year / as required.
How long should the chair be charged daily to ensure top performance from the batteries?
We recommend that the chair be charged for eight hours a day.
What should I do if the chair can’t be charged for eight hours a day?
You must ensure that the chair is fully charged at least once a week.
What should I do with batteries that are to be discarded?
We recommend that batteries to be discarded should be handed to a specialist center in order to ensure that they are disposed of correctly.
What type of charger should be used?
Only use the charger belonging to your wheelchair, and follow the user guide for the charger as regards how the batteries are to be charged.
Is it safe to leave the charger connected to the wheelchair?
There is no risk involved in leaving the charger connected to the wheelchair as long as the power is switched on. This will ensure that the batteries are charged fully and will maintain their charge.
What are the steps to take when charging the batteries?
- Check that the chair is switched off.
- Connect the charger cable to the charger contact.
- Connect the power supply cable to the mains.
What are the steps to take when the batteries are fully charged?
- Disconnect the charger from the mains.
- Disconnect the charger from the wheelchair.
How do I clean the frame and body of the chair?
The chair is cleaned using mild soapy water as required.
How do I clean the seat?
Cleaned as required; cf. the cleaning instructions sewn onto the seat pads.
How do I release the seat manually if the power is off?
- Pull the lock pin out to the side, and a gas spring on the lifting arm will raise the seat unit. Bear in mind that this is a strong spring which will react quickly when the lock pin is removed. Place weight on the seat, this will allow the lock pin to be loosened more easily.
How do I remove the cover of the chair?
- Remove the cover using six body screws on the main cover which covers all of the lower part of the wheelchair.
- Lift off the main cover.
How do I disconnect the power?
- Check that the chair is switched off.
- Remove the battery shoes and isolate these so that they cannot come into physical contact with the battery poles.
- Place the battery shoes in the cavity behind the batteries.
How do I fit the batteries?
- Connect the power: follow the instructions for removal, but in reverse order.
- Fit the main cover.
- Press the seat unit down while guiding the seat raise motor into the attachment device.
- Check that the levers for disconnecting the drive motors are in Operation position. These are marked Operation – Disconnected.
- Switch on the chair using the on/off switch on the control panel, then check that all the electrical functions work.
What should I do if the chair is completely dead?
- Check that the on/off switch is set to On.
- Check that the magnetic key is not activated.
- Check that the switches for disconnecting the motor are in “Operation” position.
What should I do if the chair can be moved but none of the electrical functions are working?
Contact your dealer.
What should I do if the chair will not accept a charge?
- Plug in the chair.
- Make sure that the indicator lamp on the charger is on.
- If the indicator on the charger is not on, there is a fault in the charger.
- Contact your dealer.
What should I do if the chair’s indicator lamp flashes once, with two seconds’ gap between flashes?
Leave the chair on for 10 seconds, switch it off for 10 seconds, then switch it on again. The chair should be ready for operation.
What should I do if the chair’s indicator lamp flashes twice, with two seconds’ gap between flashes?
Lower the seat height until it is below the speed reduction limit. Contact your dealer if needed.
What should I do if the chair’s indicator lamp flashes several times, with two seconds’ gap between flashes?
Count the number of flashes, then contact your dealer.
What should I do if the chair is difficult to move?
Select a different operating program. Contact your dealer if needed.
What should I do if the speed of the chair is suddenly halved while it is moving?
Check the seat height as the chair is fitted with speed reduction.
What should I do if the electric back function and electric tilt move forwards only?
Raise the seat so that the limiter switches are not enabled. Contact your dealer if needed.
What should I do if a part seems loose?
Check fitting or tightening. Tighten loose screws. If you are not sure what is wrong or how you should fix it, contact your service partner.
What should I do if lift, tilt, or back function moves in one direction only?
Check whether there are any foreign bodies in the cover, and remove these. Contact your dealer if needed.
What optional extras are available for Balder electric wheelchairs?
- Bag with the Balder logo, black
- Bag with the Balder logo, small, black
- Fixing bar for ruck-sack/bag F/L
- Fixing bar for ruck-sack/bag Junior
- Kneepads, removable (set), F/L
- Thigh supports, removable (set), F/L
- Support pads, knees/thighs, Balder Junior, 6×11 cm
- Support pads, knees/thighs, Balder Junior, 6×20 cm
- Support pads, back, Balder F/L, Comfort 1-3
- Support pads, back, Balder F/L, Comfort 4-6
- Support pads, back, Balder Junior, 6×11 cm
- Attendant control 2
- Attendant control with emergency stop function
- Separate switch panel with all functions
CLICK HERE TO DOWNLOAD ETAC BALDER JUNIOR (01) PDF MANUAL