ERGOLUX EL22CMPSMKA (01) PDF Document

To prevent injury or damage when unpacking your vacuum-sealed ERGOLUX EL22CMPSMKA mattress, please follow these important safety guidelines:

• Vacuum-sealed mattresses expand rapidly once unsealed. Serious injuries can occur if safety precautions are not followed.

• Place the mattress on a stable, flat surface such as a bed frame or the floor. Ensure the surrounding area is clear of obstacles and offers enough space for the mattress to expand.

• Do not allow children or pets near the mattress during unpacking and inflation.

• Ensure that no one is positioned in the area where the mattress may unfold or expand during inflation.

• Only use the supplied cutter to open the outer packaging. Do not use sharp tools such as knives or scissors, as they may puncture the mattress or cause injury.

• Keep your hands, face, and body away from the edges of the mattress while cutting the plastic. The mattress is tightly compressed and will expand quickly when unsealed.

• Remove all packaging materials and dispose of them responsibly, keeping them out of reach of children and pets.

• Let the mattress fully expand for at least 24 hours before use.

For optimal support for your ERGOLUX EL22CMPSMKA mattress, use a suitable bed frame; preferably a divan base, flat slatted base (with slats no more than 60mm apart), or metal mesh base. Wider gaps may cause the mattress to sink, reducing comfort over time.

Serious injuries have occurred when opening vacuum-sealed mattresses. Follow the instructions below to safely open your ERGOLUX EL22CMPSMKA mattress:

1. Place the mattress on your bed frame or a completely flat surface. Ensure the area is clear and there is ample space for the mattress to fully inflate.

2. Use only the cutter provided to carefully cut the outer plastic without damaging the vacuum seal. Do not use knives or scissors, as they can damage the mattress and cause injury.

3. Keep your hands, face, and body clear of the mattress edges while cutting the outer plastic. The mattress is under pressure and will inflate rapidly once unsealed.

4. Remove the outer plastic and gently unroll the mattress so it lies flat.

5. Carefully cut the edges of the vacuum-sealed plastic. The mattress will inflate.

6. Remove all remaining plastic packaging and dispose of it safely.

7. Allow the mattress to fully inflate for 24 hours before use.

A mild odour may be present when your ERGOLUX EL22CMPSMKA mattress is first unpacked. This is normal and will dissipate over time. Air out the mattress in a well-ventilated room for several hours before use. The scent typically fades within 2-3 weeks.

For general cleaning of your ERGOLUX EL22CMPSMKA mattress, follow these steps:

• Vacuum the mattress and base occasionally to remove dust and debris.

• Avoid using detergents or chemical cleaners, as these may damage the fabric and stitching.

To remove stains from your ERGOLUX EL22CMPSMKA mattress:

• For stains, gently blot with a clean cloth and a mild detergent mixed with warm or cold water.

• Do not soak the mattress or allow excessive moisture to penetrate the surface.

• Always carry the mattress upright on its side for easier handling and to avoid damage.

• If storing the mattress for an extended period, lay it flat in a dry, well-ventilated space.

• Do not lift the mattress by any fabric handles (if present); these are intended for positioning only.

• Never bend, fold, or roll the mattress.

• Use a washable mattress protector to safeguard against stains and spills.

• For allergy concerns, choose a cover made from a barrier fabric.

Minor body impressions and upholstery settlement are normal, especially in zoned areas designed to support your body’s natural contours. This indicates the mattress is functioning as intended and is not a defect.

• Do not flip the mattress. Instead, rotate it 180° every 3 months.

• Regular rotation helps distribute wear evenly, reduces sagging, and extends the mattress lifespan.