EPSON BRIGHTLINK PRO 1430WI (02) PDF MANUAL

EPSON BRIGHTLINK PRO 1430WI (02) PDF SUMMARY:

How do I start writing on the screen?

Turn on the projector, then turn on the interactive pen, and then start writing.

---

How do I use the pen or my finger as a mouse?

To click, tap. To double-click, double-tap. To click and drag, tap and drag. To move the cursor, hover over the board. To right-click, click the pen button or tap and hold your finger for 3 seconds.

---

How do I take a snapshot of the screen?

Tap the camera icon or press Capture on the Control Pad to save your image and notes as a new screen on the digital whiteboard.

---

How do I print my notes?

Tap the Print icon or press Print on the Control Pad to print the displayed screen on a connected printer (if available).

---

How do I save my notes?

Tap the Save icon or press Save on the Control Pad to save the image and notes as a single file.

---

How do I split the screen?

Tap the Split Screen icon to project two different sources side-by-side.

---

How do I project an image from my connected device?

First, connect your device, then tap the Source Select icon to select the active source, and then use the interactive pen or your finger to add notes.

---

How do I use the interactive pen as a mouse with my computer?

Connect your computer, then tap the Source Select icon to select the computer’s source, then use the interactive pen or finger as a mouse to launch programs and browse the web.

---

How do I open content from a USB or network drive?

Insert a USB flash drive in the control pad (or use a networked drive), then tap the Insert Image icon to select and display a JPG, PNG, EWF, or PDF page, and finally, use the interactive pen or your finger to add notes.

---

How do I save or share my notes via email?

Tap the Mail or Save icon on the bottom toolbar, then select the necessary settings, and finally tap Save to save your notes or Send to send the email.

---

What are the functions of the Control Pad?

The control pad can select whiteboard mode (and turns on the projector if it is off), select from various image sources connected to the projector, save the projected image, print the projected image, turn the projector on/off, capture the projected image (switch to whiteboard mode to paste the captured image), connect a USB cable to a computer, and connect a USB flash drive. Also, removing the top cover allows you to install batteries or connect the Control Pad to the projector or to a printer.

---

How do I connect my Android or iOS device to the projector?

Connect to BrightLink Pro using your Android or iOS device’s wireless settings, then launch the Epson iProjection app on your device, select the projector, and display your content, and finally, tap the Source Select icon to switch to the device’s source.

---

How do I use the Epson iProjection App?

Download the Epson iProjection app, then you can display documents, images, and even browse web pages, annotate directly from your device or BrightLink Pro, and capture your notes and then save, print, or share via email.

---

How do I add a new page to the whiteboard?

Tap the thumbnails at the bottom of the screen to switch between pages. You can add up to 50 new pages to your whiteboard.

---

How do I change pen colors?

Tap a pen color to select the active color. Tap the down arrow next to a pen to choose a custom color. Tap the smaller or larger circle to choose a thin or thick line.

---

How do I erase mistakes?

Tap the Eraser icon or press the button on the pen to enter eraser mode.

---

How do I duplicate a page?

Tap the duplicate page icon to create a duplicate of the current page as a new page.

---

How do I get help with the whiteboard icons?

Tap the Help icon to display an on-screen guide to the whiteboard icons.