Free English ELECTROLUX DBGL5432CN (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ELECTROLUX DBGL5432CN (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the functions of the control panel buttons on the ELECTROLUX DBGL5432CN cooker hood?
The control panel of your ELECTROLUX DBGL5432CN has several functions:
| Button | Function | Description |
|---|---|---|
| 1 | Hob²Hood | Indicator of the function to control the hood from the hob. |
| 2 | Lamp | Turns the lights on and off. |
| 3 | First speed / Off | The motor switches to the first speed level. A second press turns off the appliance. |
| 4 | Second speed | The motor switches to the second speed level. |
| 5 | Third speed | The motor switches to the third speed level. |
| 6 | Maximum speed | The motor switches to the maximum speed level. |
| 7 | Filter notification | Reminds to change or clean the charcoal filter and clean the grease filter. |
How do I operate the ELECTROLUX DBGL5432CN cooker hood?
To operate your ELECTROLUX DBGL5432CN cooker hood:
1. Press the first speed button to switch on the appliance.
2. If needed, press the light button to illuminate the cooking surface.
3. If needed, change the speed by pressing the desired button.
To turn off the appliance, press the first speed button again.
It is recommended to leave the hood operating for approximately 15 minutes after cooking.
What are the recommended speed settings for the ELECTROLUX DBGL5432CN?
Check the recommended speed for your ELECTROLUX DBGL5432CN according to the table below:
| While heating up food, cooking with covered pots. |
| While cooking with covered pots on multiple cooking zones or burners, gentle frying. |
| While boiling, frying large quantities of food without a lid, cooking on multiple cooking zones or burners. |
| While boiling, frying large quantities of food without a lid, with high humidity. The hood operates on maximum speed. After 6 minutes the appliance returns to the previous setting. |
How do I manage the filter notification on the ELECTROLUX DBGL5432CN?
The filter alarm on your ELECTROLUX DBGL5432CN reminds you to change or clean the charcoal filter and the grease filter.
- The filter indicator is turned on for 30 seconds if the grease filter must be cleaned.
- The filter indicator flashes for 30 seconds if the charcoal filter must be replaced or cleaned.
To reset the function:
Press the button for 3 seconds.
To activate or deactivate the function:
1. To activate the function, press the button for 3 seconds. If the function is activated, the indicator flashes two times.
2. To deactivate the function, press the button for 3 seconds. If the function is deactivated, the indicator flashes once.
How do I connect or disconnect the remote control for the ELECTROLUX DBGL5432CN?
The ELECTROLUX DBGL5432CN can be controlled with a remote control, which is originally enabled. To connect or disconnect the remote control:
1. Switch off the appliance.
2. Press the button for 3 seconds.
The indicator on the control panel flashes twice if the function is enabled and once if it is disabled.
What are the cleaning instructions for the ELECTROLUX DBGL5432CN?
| Cleaning Agents |
Do not use abrasive detergents and brushes. Clean the surface of the appliance with a soft cloth with warm water and a mild detergent. After cooking, some parts of the appliance can get hot. To avoid stains, the appliance must be cooled down and dried with a clean cloth or paper towels. Clean stains with a mild detergent. |
| Keep the hood clean |
Clean the appliance and grease filters each month. Carefully clean the interior and grease filters from fat. Fat accumulation or other residue may cause fire. Follow the instructions for cleaning the accessories when the filter notification is on. Grease filters can be washed in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, but this has no influence on the performance of the appliance. |
| Charcoal filter | The saturation time of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. The activated charcoal filter is not washable, cannot be regenerated, and must be replaced approximately every 4/6 months of operation, or more frequently for particularly heavy usage. |
How do I clean the grease filter on my ELECTROLUX DBGL5432CN?
To clean the grease filter on your ELECTROLUX DBGL5432CN:
1. Press the handle of the mounting clip on the filter panel underneath the hood (1).
2. Slightly tilt the front of the filter downwards (2), then pull. Repeat the first two steps for all filters.
3. Clean the filters using a sponge with non-abrasive detergents or in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, but this does not affect the appliance’s performance.
4. To mount the filters back, follow the first two steps in reverse order. Repeat the steps for all filters if applicable.
How do I replace the charcoal filter on my ELECTROLUX DBGL5432CN?
The charcoal filter on your ELECTROLUX DBGL5432CN is non-washable. To replace the filter:
1. Remove the grease filters from the appliance.
2. Press the front edge in the slot towards the bottom part of the filter. Slightly tilt the front of the filter downwards.
3. To install a new filter, perform the same steps in reverse order.
In any case, it is necessary to replace the filters at least every four months.
What should I do if my ELECTROLUX DBGL5432CN will not activate?
If you cannot activate your ELECTROLUX DBGL5432CN, check the following:
- Possible Cause: The appliance is not connected to a power supply or is connected incorrectly.
- Remedy: Check if the appliance is correctly connected to the electrical supply.
- Possible Cause: The fuse is blown.
- Remedy: Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
What should I do if the lamp on my ELECTROLUX DBGL5432CN does not operate?
If the lamp on your ELECTROLUX DBGL5432CN does not operate, it is likely defective. You should replace the lamp as instructed in the “Care and Cleaning” chapter of your user manual.
Why doesn’t my ELECTROLUX DBGL5432CN absorb enough vapors?
If your ELECTROLUX DBGL5432CN is not absorbing enough vapors, the motor speed may not be adequate for the amount of vapors appearing. To resolve this, change the speed of the motor to a higher setting.
Why is the filter alarm indicator on my ELECTROLUX DBGL5432CN on?
If the filter alarm indicator on your ELECTROLUX DBGL5432CN is on, it means the filter alarm has been activated. The grease filter must be cleaned, or the charcoal filter must be replaced or cleaned. Please refer to the filter notification section in the “Daily use” chapter of your manual for instructions.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ELECTROLUX DBGL5432CN (01) PDF DOCUMENT