Free English EDIFIER W820NB PLUS EDF200220 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD EDIFIER W820NB PLUS EDF200220 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I power on or off my EDIFIER W820NB PLUS EDF200220?
Press and hold the power button to power on or off your EDIFIER W820NB PLUS EDF200220.
How do I perform the first time pairing of my EDIFIER W820NB PLUS EDF200220?
Once powered on, the EDIFIER W820NB PLUS EDF200220 will automatically enter Bluetooth pairing mode. Select EDIFIER W820NB PLUS EDF200220 from your device list to connect.
How do I pair the EDIFIER W820NB PLUS EDF200220 with a new device?
In the ON state, press and hold the power button for about 3 seconds to enter Bluetooth pairing mode. Then, select EDIFIER W820NB PLUS EDF200220 from your device list to connect.
How do I connect the EDIFIER W820NB PLUS EDF200220 to two devices simultaneously?
Step 1. Pair device A with the EDIFIER W820NB PLUS EDF200220 successfully.
Step 2. Press and hold the power button for 3 seconds to re-enter Bluetooth pairing mode, and then select EDIFIER W820NB PLUS EDF200220 in device B settings to connect.
Step 3. Select EDIFIER W820NB PLUS EDF200220 again in device A settings to complete the multipoint connection.
What are the music controls for the EDIFIER W820NB PLUS EDF200220?
The music controls are as follows:
Play/Pause: Press the function button once.
Next track: Press the function button twice.
What are the call controls for the EDIFIER W820NB PLUS EDF200220?
The call controls are as follows:
Answer/End call: Press the function button once.
How do I switch modes on the EDIFIER W820NB PLUS EDF200220?
Switch between High Noise Cancellation and Ambient Sound modes by pressing the function button once.
How do I charge my EDIFIER W820NB PLUS EDF200220?
Connect the EDIFIER W820NB PLUS EDF200220 to a power source via the USB-C cable. Note: Make sure the USB-C port is completely dry before charging.
What is the input requirement for charging the EDIFIER W820NB PLUS EDF200220?
The input requirement for charging the EDIFIER W820NB PLUS EDF200220 is 5V 1A.
How do I reset my EDIFIER W820NB PLUS EDF200220?
In the ON state, press the “+” and “-” buttons for 5 seconds. The blue LED will blink until the reset is complete. After that, the EDIFIER W820NB PLUS EDF200220 will automatically enter Bluetooth pairing mode.
How can I use the EDIFIER W820NB PLUS EDF200220 for wired listening?
Connect the EDIFIER W820NB PLUS EDF200220 to your device using the included USB-C audio cable. Wired listening will automatically disable the Bluetooth mode.
Can I customize the controls for my EDIFIER W820NB PLUS EDF200220?
Yes, you can download the EDIFIER ConneX app to customize more control settings for your EDIFIER W820NB PLUS EDF200220.
Does the EDIFIER W820NB PLUS EDF200220 automatically connect to previous devices?
Yes, for subsequent use, the EDIFIER W820NB PLUS EDF200220 will automatically connect to the device used last time.
Will the EDIFIER W820NB PLUS EDF200220 remember two devices in multipoint mode?
Yes, for subsequent use, the EDIFIER W820NB PLUS EDF200220 will automatically reconnect to the two devices used last time.
What do the button symbols mean on the EDIFIER W820NB PLUS EDF200220?
In this guide, x1 means press once, x2 means double press, and the symbol — means press and hold.
What are the default sound control modes for the EDIFIER W820NB PLUS EDF200220?
The default sound control modes for the EDIFIER W820NB PLUS EDF200220 are High Noise Cancellation and Ambient Sound.
What should I check before charging the EDIFIER W820NB PLUS EDF200220?
Always ensure the USB-C port on the EDIFIER W820NB PLUS EDF200220 is completely dry before connecting the charging cable.
How do I verify the EDIFIER W820NB PLUS EDF200220 has entered Bluetooth pairing mode during a reset?
During the reset process for the EDIFIER W820NB PLUS EDF200220, the blue LED will blink to indicate the reset is in progress and will automatically enter pairing mode once finished.
Are there any visual cues on the EDIFIER W820NB PLUS EDF200220 while charging?
The EDIFIER W820NB PLUS EDF200220 uses LED status indicators to show the charging status, and you should ensure the connection to the power source via USB-C is secure.
How do I navigate the EDIFIER W820NB PLUS EDF200220 controls for calls?
To manage calls on the EDIFIER W820NB PLUS EDF200220, use the function button to answer or end calls by pressing it once.
Does wired listening require the EDIFIER W820NB PLUS EDF200220 to be powered on?
Wired listening on the EDIFIER W820NB PLUS EDF200220 automatically disables Bluetooth mode. Please refer to the audio connection instructions for your device when using the provided USB-C audio cable.
Can I use the EDIFIER W820NB PLUS EDF200220 without the mobile app?
Yes, the EDIFIER W820NB PLUS EDF200220 functions with basic operations using physical buttons, while the app is optional for expanded customization.
What is the purpose of the USB-C port on the EDIFIER W820NB PLUS EDF200220?
The USB-C port on the EDIFIER W820NB PLUS EDF200220 is used both for charging the internal battery and for connecting the included audio cable for wired listening.
Are there specific buttons on the EDIFIER W820NB PLUS EDF200220 to trigger multipoint pairing?
Yes, you use the power button by pressing and holding it for 3 seconds on the EDIFIER W820NB PLUS EDF200220 to re-enter pairing mode during the multipoint connection setup.
How do I indicate to my device that I want to connect to the EDIFIER W820NB PLUS EDF200220?
You select EDIFIER W820NB PLUS EDF200220 from the Bluetooth device list on your smartphone or computer.
Is the EDIFIER W820NB PLUS EDF200220 compatible with voice calling?
Yes, the EDIFIER W820NB PLUS EDF200220 supports call functionality including answering and ending calls using the onboard control button.
How do I ensure the best sound experience on the EDIFIER W820NB PLUS EDF200220?
You can toggle between Noise Cancellation and Ambient Sound on the EDIFIER W820NB PLUS EDF200220 to suit your environment.
What should I do if my EDIFIER W820NB PLUS EDF200220 is not pairing?
You can try resetting the EDIFIER W820NB PLUS EDF200220 by pressing the “+” and “-” buttons simultaneously for 5 seconds while the unit is on.
Does the EDIFIER W820NB PLUS EDF200220 have an LED indicator for pairing?
Yes, the EDIFIER W820NB PLUS EDF200220 features a blue LED that blinks during the pairing and reset process.
How do I switch the EDIFIER W820NB PLUS EDF200220 to pairing mode if it is already on?
Press and hold the power button for about 3 seconds on the EDIFIER W820NB PLUS EDF200220 to enter pairing mode.
Can I use the EDIFIER W820NB PLUS EDF200220 for hands-free calling?
Yes, the EDIFIER W820NB PLUS EDF200220 includes integrated controls for answering and ending calls.
Is the EDIFIER W820NB PLUS EDF200220 equipped with noise cancellation?
Yes, the EDIFIER W820NB PLUS EDF200220 comes with high noise cancellation and ambient sound modes.
Are there physical volume buttons on the EDIFIER W820NB PLUS EDF200220?
The instructions for the EDIFIER W820NB PLUS EDF200220 reference “+” and “-” buttons used for resetting and volume/control functions.
How do I know the EDIFIER W820NB PLUS EDF200220 is off?
Press and hold the power button on the EDIFIER W820NB PLUS EDF200220 to turn it off; the status light will reflect the change in power state.
What is the benefit of the EDIFIER ConneX app for the EDIFIER W820NB PLUS EDF200220?
The EDIFIER ConneX app allows for more customizable control settings for your EDIFIER W820NB PLUS EDF200220.
Can I connect the EDIFIER W820NB PLUS EDF200220 to a laptop and a phone at the same time?
Yes, the EDIFIER W820NB PLUS EDF200220 supports multipoint connection, which allows it to connect to two devices simultaneously following the multipoint setup procedure.
Are the controls on the EDIFIER W820NB PLUS EDF200220 intuitive?
Yes, the EDIFIER W820NB PLUS EDF200220 uses a system of single and double presses along with long presses to handle various media and call tasks.
Is the EDIFIER W820NB PLUS EDF200220 cable included in the box?
Yes, a USB-C cable is included with the EDIFIER W820NB PLUS EDF200220 for charging and wired audio connectivity.
What is the standard input power for the EDIFIER W820NB PLUS EDF200220?
The EDIFIER W820NB PLUS EDF200220 is designed to be charged using a 5V 1A power input.
How do I play or pause music on the EDIFIER W820NB PLUS EDF200220?
Press the function button once on the EDIFIER W820NB PLUS EDF200220 to play or pause your music.
Does the EDIFIER W820NB PLUS EDF200220 have a dedicated reset button?
The EDIFIER W820NB PLUS EDF200220 is reset using the “+” and “-” volume buttons pressed simultaneously for 5 seconds.
How do I change the song track on the EDIFIER W820NB PLUS EDF200220?
Double press the function button on the EDIFIER W820NB PLUS EDF200220 to skip to the next track.
What happens if I hold the function button on the EDIFIER W820NB PLUS EDF200220?
Holding the button is indicated by a “—” symbol in the guide, usually associated with power management or pairing mode on the EDIFIER W820NB PLUS EDF200220.
Can the EDIFIER W820NB PLUS EDF200220 work as a wired headset?
Yes, connecting the USB-C cable to the EDIFIER W820NB PLUS EDF200220 enables wired mode, which automatically turns off Bluetooth.
How do I finish the multipoint connection setup for the EDIFIER W820NB PLUS EDF200220?
After connecting to the second device, select EDIFIER W820NB PLUS EDF200220 again in the settings of the first device to complete the link.
Are there any special warnings for charging the EDIFIER W820NB PLUS EDF200220?
Yes, ensure the USB-C port of the EDIFIER W820NB PLUS EDF200220 is completely dry before you attempt to charge it to avoid damage.
How do I exit Bluetooth pairing mode on the EDIFIER W820NB PLUS EDF200220?
The EDIFIER W820NB PLUS EDF200220 will automatically connect to your selected device once chosen from the Bluetooth menu, effectively exiting the pairing state.
How do I activate the noise cancellation on the EDIFIER W820NB PLUS EDF200220?
You can cycle through the default sound modes including High Noise Cancellation on the EDIFIER W820NB PLUS EDF200220 by using the mode button.
What is the color of the reset indicator on the EDIFIER W820NB PLUS EDF200220?
The EDIFIER W820NB PLUS EDF200220 uses a blue LED that will blink during the reset process.
Can I use the EDIFIER W820NB PLUS EDF200220 with non-Bluetooth devices?
Yes, the EDIFIER W820NB PLUS EDF200220 supports wired listening via the provided USB-C audio cable.
Are there different sound modes available on the EDIFIER W820NB PLUS EDF200220?
Yes, the EDIFIER W820NB PLUS EDF200220 features High Noise Cancellation and Ambient Sound modes by default.
How do I pair the EDIFIER W820NB PLUS EDF200220 to a second device in multipoint mode?
Hold the power button for 3 seconds to re-enter Bluetooth pairing, then select EDIFIER W820NB PLUS EDF200220 from the second device’s Bluetooth list.
CLICK HERE TO DOWNLOAD EDIFIER W820NB PLUS EDF200220 (01) PDF DOCUMENT