FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF USER GUIDE
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF USER MANUAL
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF OWNER GUIDE
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF OWNER MANUAL
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF REFERENCE GUIDE
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF REFERENCE MANUAL
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH DSC MAXSYS LCD4501 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD DSC MAXSYS LCD4501 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
DSC MAXSYS LCD4501 (01) PDF SUMMARY:
What does the LCD4501 keypad do?
The LCD4501 keypad presents system status via a 32-character liquid crystal display. It is designed for use with Maxsys PC4010/4020 systems.
How does the LCD4501 keypad connect to the control panel?
The keypad connects to the control panel via a 4-wire Combus.
What is the current draw of the LCD4501 keypad?
The current draw is 50mA from the Combus.
What are the status lights on the LCD4501 keypad?
The keypad has Ready (green), Armed (red), and Trouble (yellow) status lights.
What does the LCD4501 package include?
The package includes one LCD4501 keypad, four mounting screws, one keypad inner door label, and one set of Fire, Auxiliary, and Panic key labels.
Where should the keypad be mounted?
The keypad should be mounted where it is accessible to designated points of entry/exit.
How do you mount the keypad?
- Remove the keypad backplate by loosening the screw located at the base of the unit.
- Secure the keypad backplate to the wall in the desired location using the provided screws.
- Complete the keypad wiring before mounting the keypad to its backplate.
What should you do before beginning to wire the unit?
Before beginning to wire the unit, ensure that all power (AC transformer and battery) is disconnected from the control panel.
How do you complete the keypad wiring?
Connect the four Combus wires (red, black, yellow, and green) to the keypad terminals (R B Y G).
How do you apply power to the control panel?
- Connect the battery leads to the battery.
- Connect the AC transformer.
When should you connect the power to the control panel?
Do not connect the power until all wiring is complete.
What do you need to do once all wiring is complete?
Once all wiring is complete, the module must be enrolled on the system. Refer to the PC4010/4020 Installation Manual for instructions on enrolling keypads.
Where can I find information on programming the keypad?
Refer to your PC4010/4020 Installation Manual for descriptions of the programmable features.
What are some of the programmable features of the keypad?
The programmable features include:
- Partition and Global keypad options
- Keypad time-out
- Keypad blanking
- Fire, Auxiliary and Panic Keys
- Keypad lockout
- Keypad tampers (this feature must be enabled if using tamper version keypads)
- Function keys
What are the default settings of the five function keys?
The five function keys are programmed as Stay Arm, Away Arm, Door Chime Activation, Reset, and Quick Exit by default.
How can I change the default settings of the function keys?
To alter the function keys from their default settings, see the list of available options in the PC4010/4020 v3.0 Installation Manual.
When are the function keys available for use?
Function keys are only available when used with PC4010/4020 v3.0 and higher.
CLICK HERE TO DOWNLOAD DSC MAXSYS LCD4501 (01) PDF MANUAL