FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF USER GUIDE
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF USER MANUAL
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF OWNER GUIDE
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF OWNER MANUAL
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF REFERENCE GUIDE
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF REFERENCE MANUAL
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH SONY CYBER-SHOT DSC-W70 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD SONY CYBER-SHOT DSC-W70 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
SONY CYBER-SHOT DSC-W70 (01) PDF SUMMARY:
How do I connect the battery charger?
Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
Is the battery charger disconnected from the power source if the CHARGE lamp is not lit?
Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket).
What should I do if trouble occurs while using the battery charger?
If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
How do I disconnect the battery charger after charging is finished?
When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.
How long does it take to fully charge the battery pack?
The time required to fully charge the battery pack (supplied) from when it is completely discharged at a temperature of 25°C (77°F) is approximately 330 min, and the practical charging time is approximately 270 min. Charging may take longer under certain circumstances or conditions.
How do I insert the battery pack into the battery charger?
Push the battery pack gently until it clicks into place.
What does it mean when the CHARGE lamp is lit?
When the CHARGE lamp is lit, it means the battery is charging.
What does it mean when the CHARGE lamp is off?
When the CHARGE lamp is off, it means charging is completed (practical charge).
How much longer will the charge last if I continue charging the battery pack for about one more hour?
If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer.
How do I insert the charged battery pack into the camera?
Open the battery/ “Memory Stick Duo” cover and insert the battery pack while pressing the battery eject lever with the tip of the battery.
How do I close the battery/ “Memory Stick Duo” cover?
Close the battery/ “Memory Stick Duo” cover.
How can I use the camera with an AC adapter?
You can connect the camera to a wall outlet (wall socket) using the AC-LS5K AC Adaptor (not supplied).
How do I check the remaining battery time?
Press the POWER button to turn on and check the remaining battery on the LCD screen.
How long does it take for the correct battery remaining indicator to appear?
It takes about one minute until the correct battery remaining indicator appears.
When might the displayed battery remaining indicator be incorrect?
The displayed battery remaining indicator may not be correct under certain circumstances.
How do I remove the battery pack?
Slide the battery eject lever to pull the battery pack out. Be sure not to drop the battery pack when pulling it out.
Can I use the camera abroad?
You can use the camera, the battery charger, and the AC-LS5K AC Adaptor (not supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz.
Can I use an electronic transformer (travel converter) with the camera?
Do not use an electronic transformer (travel converter), as this may cause a malfunction.
What does the battery remaining indicator mean?
- Sufficient power remaining
- Battery half full
- Battery low, recording/ playback will stop soon. Change the battery with fully charged one, or charge the battery (The warning indicator flashes)
How do I set the clock?
- Select the date display format with v/V, then press z.
- Select each item with b/B and set the numeric value with v/V, then press z.
- Select [OK] with B, then press z.
How do I cancel setting the clock?
To cancel, select [Cancel] and press z.
How do I change the date and time?
Select [Clock Set] in the (Setup) screen and perform the procedure in step 3.
How is midnight indicated on the clock display?
Midnight is indicated as 12:00 AM.
How is noon indicated on the clock display?
Noon is indicated as 12:00 PM.
If I selected [D/M/Y] in step 3-1, how do I set the time?
If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.
What happens if I turn on the camera without setting the clock?
Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
What should I avoid when turning on the camera?
Do not touch the lens portion as the cover opens and the lens portion extends. Also, do not leave the camera with the lens portion extended for a long period of time with the power off as this may cause malfunction.
How do I turn off the power?
Press the POWER button again.
What happens if I don’t operate the camera for about three minutes?
If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function).
How do I change the language setting?
To change the language setting, press MENU to display the menu screen. Select (Setup) with the control button, then, select [ Language] in (Setup1), and select the desired language.
How do I select an image size?
- Select a mode.
- Press (Image Size).
- Select the size with v / V.
- Press (Image Size) to complete the setting.
What happens when there is no “Memory Stick Duo” inserted?
The camera records/plays back images using the internal memory.
How do I insert the “Memory Stick Duo”?
Insert the “Memory Stick Duo” all the way in until it clicks.
What are the available image sizes for still images?
- Up to 10x15cm/4×6"print
- Up to A3/11×17"print
- Up to A4/8×10"print
- Up to 13×18cm/5×7"print
- For E-mail
What are the available image sizes for movies?
[640(Fine)] (“Memory Stick PRO Duo” only), [640(Standard)] or
What is the image aspect ratio for still images?
Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards.
What may happen when printing still images?
Both edges of the image may be cut off when printing.
How can I enjoy higher quality images?
By using a Memory Stick slot or USB connection, you can enjoy higher quality images.
Does the number of recordable images vary?
The number of recordable images and time can differ according to shooting conditions.
How do I remove a “Memory Stick Duo”?
Open the battery/“Memory Stick Duo” cover, then push the “Memory Stick Duo” in once.
What should I not do when the access lamp is lit?
Never remove the battery/“Memory Stick Duo” or turn off the power when the access lamp is lit. The data may be corrupted.
What is included with the camera?
- Battery charger BC-CSG/ BC-CSGB
- Power cord (mains lead)
- Rechargeable battery pack NP-BG1/Battery case
- USB, A/V cable for multi-use terminal (DSC-W50/W70)
- USB cable (DSC-W30/W40)
- A/V cable (DSC-W30/W40)
- Wrist strap (DSC-W30/W50/ W70)
- Neck strap (DSC-W40)
- Soft carrying case (DSC-W40)
- CD-ROM (Cyber-shot application software)
- Operating instructions: “Read This First” (this manual)
- Operating instructions: “User’s Guide/Troubleshooting”
What should I do before using the camera for the first time?
Charge the battery pack (supplied) before using the camera for the first time.
What is a normal characteristic of the LCD screen?
There may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen. These points are normal in the manufacturing process and do not affect the recording in any way.
What precautions should I take with the camera?
Be careful not to bump the lens or the LCD screen, and not to apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc.
What kind of batteries should I use with the camera?
Designed for use with compatible Sony batteries.
How do I select a mode?
Select . Select . Select .
How do I shoot a still image?
- Position the subject in the center of the focus frame.
- Press and hold the shutter button halfway down to focus.
- Press the shutter button fully down. The shutter sounds.
How do I shoot a movie?
Press the shutter button fully down.
How do I stop recording a movie?
To stop recording, press the shutter button fully down again.
How do I change the image brightness (EV)?
Before Step 2, press b ( ) on the control button. Adjust the image brightness with v (Brighter) / V (Darker). To delete the displayed scale bar, press b again.
How can I set the compensation value for image brightness?
The compensation value can be set in 1/3EV increments.
When might the exposure adjustment be ineffective?
If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective.
How do I select a flash mode for still images?
Before step 2, press v ( ) on the control button repeatedly until the desired mode is selected.
What are the flash shooting distances for DSC-W70?
- W side: Approx. 0.2 to 3.7 m (7 7/8 inches to 12 feet 1 3/4 inches)
- T side: Approx. 0.3 to 2.1 m (11 7/8 inches to 6 feet 10 3/4 inches)
What are the flash shooting distances for DSC-W30/W40/W50?
- W side: Approx. 0.2 to 4.2 m (7 7/8 inches to 13 feet 9 3/8 inches)
- T side: Approx. 0.3 to 2.2 m (11 7/8 inches to 7 feet 2 5/8 inches)
Why does the flash strobe twice?
The first time is to adjust the light quantity.
How do I shoot close-up (Macro)?
Before step 2, press B ( ) on the control button. To cancel, press B again.
What zoom setting is recommended for close-up (Macro) shooting?
Setting the zoom all the way to the W side is recommended.
What may happen with the focus range when shooting close up?
The in-focus range becomes narrow, and the complete subject may not entirely be in focus.
What does “No indicator” mean for the flash?
Strobes when there is insufficient light or backlight (default setting).
What does it mean when the flash is forced on?
The flash is forced on.
What does “Slow synchro (Flash forced on)” mean?
The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.
What does it mean when the flash is forced off?
The flash is forced off.
How do I use the self-timer?
Before Step 2, press V ( ) on the control button repeatedly until the desired mode is selected.
What is the shortest shooting distance?
The shortest shooting distance is 50 cm (19 3/4 inches).
When should I shoot in the close-up (Macro) mode?
Shoot in the close-up (Macro) mode when shooting a subject closer than the shortest shooting distance.
What happens when the camera cannot focus on the subject automatically?
When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing slowly and the beep does not sound. Recompose the shot and focus again.
What are some subjects that are difficult to focus on?
- Distant from the camera and dark
- The contrast between the subject and its background is poor
- Seen through glass
- Moving fast
- Reflective light or with a lustrous finish
- Flashing
- Backlit
How do I brighten up the display (DSC-W50/W70 only)?
If you view images in bright outside light, adjust the brightness of the LCD backlight up. If you press (Screen display switch) button longer, the backlight brightens. If you press again, the backlight is cancelled.
How do I turn off the LCD screen?
Press (Screen display switch) button repeatedly. Use the finder for saving battery power, or shooting images when it is difficult to confirm using the LCD screen.
What happens when I press the shutter button when using the self-timer?
Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates.
How do I cancel the self-timer?
To cancel, press V again.
What are the self-timer modes?
- Not using the self-timer
- Setting the 10-second delay self-timer
- Setting the 2-second delay self-timer
When might I use the 2-second delay self-timer?
If you use the 2-second delay self-timer, you may prevent blur.
How do I turn off the Function Guide?
The operational instructions displayed on the Function Guide are automatically turned off in a few seconds. When you want to cancel the Function Guide, press the Shutter Button half way down. You can set the Function Guide not to be displayed on the (Setup) screen.
How do I cancel the Scene Selection?
Set the mode dial to other than the mode of Scene Selection.
How do I use Scene Selection modes?
- Select the desired mode of Scene Selection.
- Shoot with the shutter button.
What are some Scene Selection modes?
- High Sensitivity
- Twilight
- Twilight portrait
- Snow
- Beach
- Landscape
- Soft snap
What happens when I press a button to select functions that cannot be combined with Scene Selection?
When you press the button to select functions that cannot be combined with Scene Selection, a beep sounds.
How do I delete images?
- Display the image you want to delete and press (Delete).
- Select [Delete] with v, then press z.
How do I cancel the deletion?
Select [Exit], then press z.
How do I switch to playback mode?
Press (Playback). If you press button when the camera is powered off, the camera is turned on in the playback mode.
How do I select an image in playback mode?
Select an image with b/B.
How do I play back a movie?
To play back a movie, press z.
How do I return to the shooting mode?
- Press (Playback) again.
- Press and hold the shutter button halfway down.
- Change the position of the mode dial.
How do I view an enlarged image (playback zoom)?
Slide lever while displaying a still image.
How do I undo the zoom in playback mode?
To undo the zoom, press lever.
How do I adjust the portion of an enlarged image?
Adjust the portion with v/V/b/B.
How do I cancel playback zoom?
Cancel playback zoom with z.
How do I view an index screen?
Slide (Index) lever and select an image with v/V/b/B.
How do I return to the single-image screen from the index screen?
To return to the single-image screen, press z.
How do I display the next (previous) index screen?
To display the next (previous) index screen, press b/B.
How do I delete images in index mode?
- While an index screen is displayed, press (Delete) and select [Select] with v/V on the control button, then press z.
- Select the image you want to delete with v/V/b/B, then press z to display the (Delete) indicator on the selected image.
- Press (Delete).
- Select [OK] with B, then press z.
How do I delete all the images in the folder in index mode?
To delete all the images in the folder, select [All In This Folder] with v/V in step 1 instead of [Select], then press z.
How do I cancel a selection for deletion?
Select an image you have previously selected for deletion, then press z to delete the indicator from the image.
CLICK HERE TO DOWNLOAD SONY CYBER-SHOT DSC-W70 (01) PDF MANUAL