Free English DPNAO YW-010 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD DPNAO YW-010 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What should I do before starting the operation on the DPNAO YW-010?
Before starting the operation, please connect the DC power supply first. The battery function is just for backup and saves settings during outages on the DPNAO YW-010.
How do I play a CD on the DPNAO YW-010?
Step 1. Insert CD disk into the main unit.
Step 2. Press the FUNC button. The LED display will show “Ed”.
Step 3. Press the II button for Play/Pause CD.
Step 4. Press the rewind/forward button. Press the stop button for stop CD play.
Step 5. Press the mode button to repeat CD: repeat one, repeat all, random, or normal.
How do I play USB or AUX-in music on the DPNAO YW-010?
Step 1. Insert the USB device into the USB jack behind the main unit (for USB music). For AUX-in, follow Step 2 based on the audio source selected in Step 2 on page 2.
Step 2. Press the FUNC button. The LED display will show “US6” for USB or select the audio source (CD/USB/AUX/RADIO) using the FUNC button as described on page 2.
Step 3. Press the II button for Play/Pause USB.
Step 4. Press the stop button. Press the rewind/forward button.
How do I tune the radio on the DPNAO YW-010?
Step 1. Press the FUNC button. The LED display will show the radio frequency (e.g., 93.8).
Step 2. For manual tune, press the rewind/forward button. For auto tune, hold press the rewind/forward button. The LED display will search the radio frequency.
Step 3. Press the rewind/forward button to turn your radio station.
Step 4. Press the mode button to confirm a radio station.
Step 5. Press ALM2/CH+ to select a preset station.
How do I preset a radio station on the DPNAO YW-010?
Step 1. Turn your radio station using the rewind/forward button.
Step 2. Hold press the mode button. The LED will show “PO 1” and blink.
Step 3. Press the rewind/forward button to select the preset number (e.g., PO 1).
Step 4. Press the mode button to confirm the radio station.
Step 5. Press ALM2/CH+ to select a preset station.
How do I set the clock on the DPNAO YW-010?
Step 1. Turn OFF the unit.
Step 2. Press the SET button to enter 12/24 format. Press the rewind/forward button to select 12/24 format (e.g., 12H or 24H).
Step 3. Press the SET button again to set the hour. Press the rewind/forward button to set hour. The LED display will blink.
Step 4. Press the SET button again to set the minutes. Press the rewind/forward button to set minutes. The LED display will blink.
How do I set the alarm on the DPNAO YW-010?
Step 1. Turn OFF the unit.
Step 2. Press the ALM1/+10 button to confirm.
Step 3. Press the button to select the alarm hour. Press the rewind/forward button to set hour.
Step 4. Press the button to select the alarm minutes. Press the rewind/forward button to set minutes.
Step 5. Set alarm source (buzzer, CD, USB, or Radio) using the button.
Step 6. Set volume level (05 to 25 level) using the button.
How do I set the sleep timer on the DPNAO YW-010?
Step 1. Press the FUNC button to select the audio source (CD/USB/AUX/RADIO).
Step 2. Press the ZZ button to select sleep time (120/90/60/30/20/10/OFF minutes). The LED display will blink (e.g., showing 90).
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD DPNAO YW-010 (01) PDF DOCUMENT