FREE ENGLISH DENON DL-A110 (01) PDF DOCUMENT.
FREE ENGLISH DENON DL-A110 (01) PDF USER GUIDE.
FREE ENGLISH DENON DL-A110 (01) PDF USER MANUAL.
FREE ENGLISH DENON DL-A110 (01) PDF OWNER GUIDE.
FREE ENGLISH DENON DL-A110 (01) PDF OWNER MANUAL.
FREE ENGLISH DENON DL-A110 (01) PDF REFERENCE GUIDE.
FREE ENGLISH DENON DL-A110 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH DENON DL-A110 (01) PDF REFERENCE MANUAL.
FREE ENGLISH DENON DL-A110 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH DENON DL-A110 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD DENON DL-A110 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What accessories are supplied with the DENON DL-A110?
Check that the following parts are supplied with the product:
1. Stylus cover
2. Stylus cleaning brush
3. Owner’s Manual
4. Data sheet
5. Safety Instructions
6. Certificate of Authenticity
When should I use the stylus cover for the DENON DL-A110?
Use the stylus cover to protect the cartridge stylus tip in situations such as attaching the cartridge to a different head shell.
How do I attach the DENON DL-A110 to the tone arm?
This unit is very delicate. Be especially careful when handling it.
1. Insert this unit into the tip of the tone arm.
• Insert this unit with its guide pin facing up and aligned with the hole on the top of the tone arm.
2. Turn the lock nut in the direction of the arrow to secure this unit.
Should I remove the head shell adapter from the DENON DL-A110?
The head shell adapter is attached to this unit beforehand. That gains appropriate overhang when attaching this unit to a standard universal type tone arm. We recommend that you use it without removing.
What is the recommended tracking force for the DENON DL-A110?
Tracking force in the range of 25 mN ±3 mN (2.5 g ±0.3 g) should be used.
What should I do if my amplifier does not support the MC cartridge input of the DENON DL-A110?
The output voltage of the DENON DL-A110 is 0.3 mV. If your amplifier does not support the MC cartridge input, use a step-up transformer or head amplifier designed for MC type cartridges.
How do I clean the stylus of the DENON DL-A110?
Use the included brush to carefully remove any dirt from the tip of the stylus before and after playing records.
What are the specifications of the DENON DL-A110?
| Principle: | Moving coil (MC) type |
| Output Voltage: | 0.3 mV (1 kHz, 50 mm/s horizontal direction) |
| Channel Balance: | 1 dB max. (1 kHz) |
| Channel Separation: | 25 dB min. (1 kHz) |
| Electrical Impedance: | 40 Ω/ohms ±20 % (1 kHz) |
| Load resistance: | 100 Ω/ohms or more (40 Ω/ohms when using a transformer) |
| Compliance: | 5 x 10⁻³ m/N (Using a 100 Hz record) |
| Stylus: | 0.2 mm square solid diamond |
| Stylus tip radius: | 16.5 microns (0.65 mils) |
| Tracking Force: | 25 mN ±3 mN (2.5 g ±0.3 g) |
| Frequency Response: | 20 Hz – 45 kHz |
| Weight: | 18.5 g (Head shell adapter included) |
* For the purpose of improvement, the specifications and design are subject to change without notice.
What are the overall dimensions of the DENON DL-A110 with headshell?
The overall dimensions (Unit: mm) are as follows:
• Total Length: 50 mm
• Length (cartridge body section): 34 mm
• Total Height (to top of finger lift): 39 mm
• Cartridge Body Height: 27 mm
• Cartridge Body Width: 17.5 mm
What are the dimensions of the DENON DL-A110 cartridge itself?
The cartridge dimensions (Unit: mm) are as follows:
• Total Length (including pins): 26.8 mm
• Body Length (excluding pins): 22.5 mm
• Height: 15 mm
• Width: 15 mm
• Distance from mounting hole to stylus tip: 9 mm
• Stylus tip overhang from front of body: 4.5 mm
CLICK HERE TO DOWNLOAD DENON DL-A110 (01) PDF DOCUMENT