DELL OPTIPLEX 5080 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD DELL OPTIPLEX 5080 (01) PDF MANUAL


PDF Content Summary: OptiPlex 5080 Tower Setup and specifications guide Regulatory Model: D29M Regulatory Type: D29M001 May 2020 Rev. A00 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Contents 1 Set up your computer................................................................................................................... 5 2 Chassis overview........................................................................................................................ 10 Front view............................................................................................................................................................................. 10 Back view...............................................................................................................................................................................11 System board Layout............................................................................................................................................................11 3 Technical specifications.............................................................................................................. 12 Dimensions and weight........................................................................................................................................................12 Chipset...................................................................................................................................................................................12 Processors.............................................................................................................................................................................12 Operating system................................................................................................................................................................. 13 Memory................................................................................................................................................................................. 14 Intel Optane memory........................................................................................................................................................... 15 Ports and connectors.......................................................................................................................................................... 15 Communications...................................................................................................................................................................16 Graphics and Video controller.............................................................................................................................................17 Audio and Speaker................................................................................................................................................................17 Storage.................................................................................................................................................................................. 18 Power ratings........................................................................................................................................................................19 Add-in cards..........................................................................................................................................................................19 Data security.........................................................................................................................................................................19 Environmental...................................................................................................................................................................... 20 Energy Star and Trusted Platform Module (TPM).........................................................................................................20 Computer environment.......................................................................................................................................................20 Service and support.............................................................................................................................................................21 4 Software................................................................................................................................... 22 Downloading Windows drivers...........................................................................................................................................22 5 System setup.............................................................................................................................23 Boot menu............................................................................................................................................................................ 23 Navigation keys....................................................................................................................................................................23 Boot Sequence.................................................................................................................................................................... 24 System setup options......................................................................................................................................................... 24 General options.............................................................................................................................................................. 24 System information....................................................................................................................................................... 25 Video screen options.....................................................................................................................................................26 Security...........................................................................................................................................................................26 Secure boot options...................................................................................................................................................... 27 Intel Software Guard Extensions options................................................................................................................... 28 Performance...................................................................................................................................................................28 Power management...................................................................................................................................................... 29 Post behavior................................................................................................................................................................. 29 Contents 3 Virtualization support.................................................................................................................................................... 30 Wireless options.............................................................................................................................................................30 Maintenance....................................................................................................................................................................31 System logs..................................................................................................................................................................... 31 Advanced configuration.................................................................................................................................................31 SupportAssist System Resolution................................................................................................................................ 31 Updating the BIOS in Windows ........................................................................................................................................ 32 Updating BIOS on systems with BitLocker enabled..................................................................................................32 Updating your system BIOS using a USB flash drive................................................................................................33 System and setup password..............................................................................................................................................33 Assigning a system setup password............................................................................................................................34 Deleting or changing an existing system setup password........................................................................................34 6 Getting help...............................................................................................................................35 Contacting Dell.................................................................................................................................................................... 35 4 Contents Set up your computer Steps 1. Connect the keyboard and mouse. 2. Connect to your network using a cable, or connect to a wireless network. 1 Set up your computer 5 3. Connect the display. 4. Connect the power cable. 6 Set up your computer 5. Press the power button. Set up your computer 7 6. Finish Windows system setup. Follow the on-screen instructions to complete the setup. When setting up, Dell recommends that you: • Connect to a network for Windows updates. NOTE: If connecting to a secured wireless network, enter the password for the wireless network access when prompted. • If connected to the internet, sign-in with or create a Microsoft account. If not connected to the internet, create an offline account. • On the Support and Protection screen, enter your contact details. 7. Locate and use Dell apps from the Windows Start menu—Recommended. Table 1. Locate Dell apps Dell apps Details Dell Help & Support Access help and support for your computer. 8 Set up your computer Dell Product Registration Register your computer with Dell. Table 1. Locate Dell apps(continued) Dell apps Details SupportAssist Proactively checks the health of your computer’s hardware and software. NOTE: Renew or upgrade your warranty by clicking the warranty expiry date in SupportAssist. Dell Update Updates your computer with critical fixes and important device drivers as they become available. Dell Digital Delivery Download software applications including software that is purchased but not preinstalled on your computer. Set up your computer 9 Chassis overview Topics: • Front view • Back view • System board Layout Front view 2 1. Optical Disk Drive (optional) 2. Power button with diagnostic LED 3. SD 4.0 card reader (optional) 4. Hard-disk drive activity light 5. Universal audio jack port 6. USB 2.0 port with PowerShare 7. USB 2.0 port 8. USB 3.2 Gen 2 Type-C port 9. USB 3.2 Gen 2 Type-A port 10 Chassis overview Back view 1. Line-out re-tasking Line-in audio port 2. Two DisplayPort 1.4 ports 3. 3rd Video Port (VGA/DP/HDMI/USB Type-C) (optional) 4. Four USB 3.2 Gen 1 Type-A ports 5. Two USB 2.0 ports with Smart Power On 6. Four expansion card slots 7. Power connector port 8. Power supply diagnostic light 9. Knock out slot (optional SMA connector) 10. Kensington security-cable slot 11. RJ-45 port 10/100/1000 Mbps 12. Padlock loop 13. Serial /PS2 slot System board Layout 5080 MT system board image yet to receive Chassis overview 11 Technical specifications Dimensions and weight Table 2. Dimensions and weight Description Values Height: Front 324.30 mm ( 12.77 in.) Rear 324.30 mm ( 12.77 in.) Width 154.00 mm (6.06 in.) Depth 292.20 mm (11.50 in.) Weight (maximum) 5.90 kg (13.01 lb) NOTE: The weight of your computer depends on the configuration ordered and the manufacturing variability. Chipset Table 3. Chipset Description Values Chipset Intel Q470 Processor 10th Generation Intel Core i3/i5/i7/Pentium DRAM bus width 64-bit (for single channel) Flash EPROM 32 MB PCIe bus Up to Gen 3.0 Non-volatile memory Yes BIOS Configuration Serial Peripheral Interface (SPI) 256 Mbit (32 MB) located at SPI_FLASH on chipset Trusted Platform Module (Discrete TPM Enabled) 24 KB located at TPM 2.0 on chipset Firmware TPM (Discrete TPM Disabled) By default the Platform Trust Technology feature is visible to the OS NIC EEPROM LOM configuration contained within SPI flash ROM instead of LOM e-fuse Processors NOTE: Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This3 12 Technical specifications allows customers to reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies to implement global IT standards by locking in specific product configurations worldwide. Device Guard (DG) and Credential Guard (CG) are the new security features that are only available on Windows 10 Enterprise today. Device Guard is a combination of enterprise-related hardware and software security features that, when configured together, will lock a device down so that it can only run trusted applications. If it is not a trusted application, it cannot run. Credential Guard uses virtualization-based security to isolate secrets (credentials) so that only privileged system software can access them. Unauthorized access to these secrets can lead to credential theft attacks. Credential Guard prevents these attacks by protecting NTLM password hashes and Kerberos Ticket Granting Tickets. NOTE: Processor numbers are not a measure of performance. Processor availability is subject to change and may vary by region/country. Table 4. Processors Processors Wattage Core Thre count adcoun t Speed Cache Integrated graphics GSP DG/CG Ready Intel Pentium G6400 58 W 2 4 4.0 GHz 4 MB Intel UHD Graphics 610 No Yes Intel Pentium G6500 58 W 2 4 4.1 GHz 4 MB Intel UHD Graphics 610 No Yes 10th Generation Intel Core i3-10100 6 MB Intel UHD Graphics 630 No Yes 10th Generation Intel Core i3-10300 65 W 4 8 3.6 GHz to 4.3 GHz 8 MB Intel UHD Graphics 630 No Yes 10th Generation Intel Core i5-10400 65 W 4 8 3.7 GHz to 4.4 GHz 12 MB Intel UHD Graphics 630 No Yes 10th Generation Intel Core i5-10500 65 W 6 12 2.9 GHz to 4.3 GHz 12 MB Intel UHD Graphics 630 Yes Yes 10th Generation Intel Core i5-10600 65 W 6 12 3.1 GHz to 4.5 GHz 12 MB Intel UHD Graphics 630 Yes Yes 10th Generation Intel Core i7-10700 65 W 6 12 3.3 GHz to 4.8 GHz 65 W 8 16 2.9 GHz to 4.8 16 MB Intel UHD Graphics 630 Yes Yes GHz Operating system • Windows 10 Home (64-bit) • Windows 10 Professional (64-bit) • Windows 10 IoT Enterprise 2019 LTSC (OEM only) • Windows 10 Pro Education (64-bit) Technical specifications 13 • NeoKylin 7.0 (China only) • Ubuntu 18.04 (64-bit) Commercial Platform Windows 10 N-2 and 5 year OS Supportability All newly introduced commercial platforms (Latitude, OptiPlex, and Precision) will qualify and ship with the most current factory installed Semi-Annual Channel Windows 10 version (N) and qualify (but not ship) the previous two versions (N-1, N-2). This device platform will RTS with Windows 10 version v19H2 at the time of launch, and this version will determine the N-2 versions that are initially qualified for this platform. For future versions of Windows 10, Dell will continue to test the commercial platform with coming Windows 10 releases during device production and for five years post-production, including both fall and spring releases from Microsoft. Please reference the Dell Windows as a Service (WaaS) website for additional information on N-2 and 5 year Windows OS supportability. Website can be found at this link: Platforms Qualified on specific versions of Windows 10 This website also includes a matrix of other platforms qualified on specific versions of Windows 10. Memory NOTE: A multiple-DIMM memory option is recommended to prevent any performance reduction. If the system configuration includes integrated graphics, consider selecting 2 or more DIMMs. NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules are not installed in matched pairs, the computer continues to operate, but with a slight reduction in performance. The entire memory range is available to 64-bit operating systems. Table 5. Memory specifications Description Values Slots Four DIMM slots Type DDR4 Speed 2666/2933 MHz NOTE: The Memory speed supported in Brazil for Intel Core i7/i9 processors is 2666 MHz. Maximum memory 128 GB Minimum memory 4 GB Memory size per slot 4 GB, 8 GB, 16 GB, 32 GB Configurations supported • 4 GB, 1 x 4 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 8 GB, 1 x 8 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 8 GB, 2 x 4 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 16 GB, 1 x 16 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 16 GB, 2 x 8 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 16 GB, 4 x 4 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 32 GB, 1 x 32 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 32 GB, 2 x 16 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors 14 Technical specifications Table 5. Memory specifications(continued) Description Values • 32 GB, 4 x 8 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 64 GB, 2 x 32 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 64 GB, 4 x 16 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors • 128 GB, 4 x 32 GB, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7 processors Intel Optane memory Intel Optane memory functions only as a storage accelerator. It neither replaces nor adds to the memory (RAM) installed on your computer. NOTE: Intel Optane memory is supported on computers that meet the following requirements: • 7th Generation or higher Intel Core i3/i5/i7 processor • Windows 10 64-bit version or higher (Anniversary Update) • Latest version of Intel Rapid Storage Technology driver • UEFI boot mode configuration Table 6. Intel Optane memory Description Values Type Memory/Storage/Storage accelerator Interface Gen 3 PCIe x4 NVMe Connector M.2 2280 Configurations supported 16 GB and 32 GB Capacity Up to 32 GB Ports and connectors Table 7. Ports and connectors Description Values External: Network One RJ-45 port 10/100/1000 Mbps (rear) USB • One USB 2.0 ports (front) • One USB 2.0 port with PowerShare (front) • One USB 3.2 Gen 1 Type-A port (front) • One USB 3.2 Gen 2 Type-C port (front) • Four USB 3.2 Gen 1 Type-A ports (rear) • Two USB 2.0 ports with Smart Power On (rear) Audio • One Universal Audio Jack (front) • One Line-out re-tasking Line-in audio port (rear) Technical specifications 15 Table 7. Ports and connectors(continued) Description Values Video • Two DisplayPort 1.4 ports (rear) • One HDMI 2.0b port (rear), 1 Optional 3rd Video Port (VGA/DP/HDMI/USB Type-C) Memory card reader One SD 4.0 (optional) Power port 4.50 mm x 2.90 mm DC-in Parallel/Serial port One Serial port (optional) PS/2 port Two (optional) Security One Kensington security-cable slot Antenna Two SMA connectors (optional) Internal: Expansion • Two full-height PCIe x1 slot • One full-height Gen 3 PCIe x16 slot • One full-height PCIe x 4(open ended) slot SATA Three SATA slots for 3.5-inch Hard-disk drive/2.5-inch Hard-disk drive, 1 SATA slot for slim Optical Disk Drive M.2 • One M.2 2230 slot for WiFi and Bluetooth card • One M.2 slot for 2280 PCIe solid-state drive/Optane or 2230 PCIe solid-state drive NOTE: To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626. Communications Ethernet Table 8. Ethernet specifications Description Values Model number REALTEK RTL8111HSD-CG Transfer rate 10/100/1000 Mbps Wireless module Table 9. Wireless module specifications Description Values Model number Qualcomm QCA61x4a Intel Wi-Fi 6 AX201 Qualcomm QCA9377 Transfer rate Up to 867 Mbps Up to 2.4 Gbps Up to 867 Mbps 16 Technical specifications Table 9. Wireless module specifications(continued) Description Values Frequency bands supported 2.4 GHz/5 GHz 2.4 GHz/5 GHz 2.4 GHz/5 GHz Wireless standards 802.11ac 802.11ax (Wi-Fi 6) 802.11ac

Encryption • 64-bit and 128-bit WEP • 128-bit AES-CCMP • TKIP • 64-bit and 128-bit WEP • 128-bit AES-CCMP • TKIP • 64-bit and 128-bit WEP • 64-bit and 128-bit WEP • 128-bit AES-CCMP • 128-bit AES-CCMP • TKIP • TKIP

Bluetooth 5.0 5.1 5.0 Graphics and Video controller Table 10. Integrated graphics specifications Controller External display support Memory size Processor

Intel UHD Graphics 610 • 1 x HDMI 1.4 port • 1 x DisplayPort 1.4 port Shared system memory Intel Celeron/Pentium Gold Intel UHD Graphics 630 • 1 x HDMI 1.4 port • 1 x DisplayPort 1.4 port Shared system memory 10th Generation Intel Core i3/i5/i7 Table 11. Discrete graphics specifications

Controller External display support Memory size Memory Type NVIDIA GeForce RTX 2080 Three DP 1.4/One HDMI 2.0b 8 GB GDDR5

NVIDIA GeForce GTX 1660 Super One HDMI/DVI-D 6 GB GDDR5

NVIDIA GeForce GT 730 One DP 1.4 2 GB GDDR5 AMD Radeon R5 430 One DP 1.4 2 GB GDDR5 AMD Radeon RX 640 One DP 1.4/2 x mDP 4 GB GDDR5 NOTE: Tower supports Full height (FH) cards Audio and Speaker Table 12. Audio and speaker specifications Description Values Type 4 Channel High Definition Audio Controller Realtek ALC3246 Stereo conversion 24-bit DAC (Digital-to-Analog) and ADC (Analog-to-Digital) Internal interface Intel HDA (high-definition audio) External interface • One Universal Audio Jack (front) • One Line-out re-tasking Line-in audio port (rear) Technical specifications 17 Table 12. Audio and speaker specifications(continued) Description Values Speakers 1 (optional) Internal speaker amplifier Integrated in ALC3246 (Class-D 2 W) External volume controls Keyboard shortcut controls. Speaker output average 2 W Speaker output peak 2.5 W Subwoofer output N/A Microphone N/A Storage Your computer supports one of the following configurations: • One 2.5-inch hard-disk drive • Two 2.5-inch hard-disk drives • One 3.5-inch hard-disk drive • Two 3.5-inch hard-disk drives • One 2.5-inch hard-disk drive and one 3.5-inch hard-disk drive • One M.2 2230 or 2280 solid-state drive (class 35 or class 40) • One M.2 2230 or 2280 solid-state drive (class 35 or class 40) and one 3.5-inch hard-disk drive • One M.2 2230 or 2280 solid-state drive (class 35 or class 40) and one 2.5-inch hard-disk drive • One M.2 2230 or 2280 solid-state drive (class 35 or class 40) and dual 2.5-inch hard-disk drives • One M.2 2230 or 2280 solid-state drive and one M.2 2230 solid-state drive through media card reader • One 2.5-inch hard-disk drive and one M.2 16 or 32 GB Intel Optane memory • Two 2.5-inch hard-disk drives and one M.2 16 or 32 GB Intel Optane memory • One 3.5-inch hard-disk drive and one M.2 16 or 32 GB Intel Optane memory The primary drive of your computer varies with the storage configuration. For computers: • with a M.2 solid-state drive, the M.2 solid-state drive is the primary drive • without a M.2 drive, either the 3.5-inch hard-disk drive or one of the 2.5-inch hard-disk drives is the primary drive Table 13. Storage specifications Storage type Interface type Capacity 2.5-inch, 5400 RPM, hard-disk drive SATA 3.0 Upto 2 TB 2.5-inch, 7200 RPM, hard-disk drive, SATA 3.0 Up to 1 TB

2.5-inch, 7200 RPM, FIPS Self Encrypting Opal 2.0, hard- disk drive SATA 3.0 Up to 500 GB

3.5-inch, 5400 RPM, hard-disk drive SATA 3.0 4 TB 3.5-inch, 7200 RPM, hard-disk drive SATA 3.0 Up to 2 TB M.2 2230 solid-state drive PCIe 3 Gen x4 NVMe, Class 35 Up to 512 GB M.2 2280 solid-state drive PCIe 3 Gen x4 NVMe, Class 40 Up to 1 TB M.2 2280 Opal Self-Encrypting solid-state drive PCIe 3 Gen x4 NVMe, Class 40 Up to 512 GB 18 Technical specifications Power ratings Table 14. Power ratings specifications Type 260 W (80 PLUS Bronze) 260 W (80 PLUS 360 W (80 Plus Platinum) Platinum) Input voltage 90 VAC to 264 VAC 90 VAC to 264 VAC 90 VAC to 264 VAC Input frequency 47 Hz to 63 Hz 47 Hz to 63 Hz 47 Hz to 63 Hz Input current (maximum) 4.2 A 4.2 A 5 A

Output current (continuous) • 12 VA/16.5 A • 12 VB/18 A Standby mode: • 12 VA/1.5 A • 12 VB/2.5 A • 12 VA/16.5 A • 12 VB/18 A Standby mode: • 12 VA/1.5 A • 12 VB/2.5 A • 12 VA/18 A • 12 VA/18 A • 12 VB/18 A • 12 VB/18 A • 12 VC/12 A • 12 VC/12 A Standby mode: Standby mode: • 12 VA/1.5 A • 12 VA/1.5 A • 12 VB/2.5 A • 12 VC/0 A Rated output voltage • +12 VA • +12 VA • +12 VA • +12 VA • +12 VB • +12 VB • +12 VB • +12 VB • +12 VC Temperature range Operating 5°C to 45°C (41°F to 113°F) 5°C to 45°C (41°F to 113°F) 5°C to 45°C (41°F to 113°F) Storage -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F) Add-in cards Table 15. Add-in cards Add-in cards USB Type-C 3.1 PCIe Card USB Type-A 3.1 Gen 2 PCIe Parallel/Serial add-in card (FH) PS/2/Serial add-in bracket M.2 SSD Zoom2 Card (Expansion card) Data security Table 16. Data security Data security options Values McAfee Small Business Security 30 Day Free Trial Supported McAfee Small Business Security 12-month subscription Supported McAfee Small Business Security 36-month subscription Supported

Technical specifications 19 Table 16. Data security(continued) Data security options Values

SafeGuard and Response, powered by VMware Carbon Black and Secureworks Supported

Next Generation anti-virus (NGAV) Supported Endpoint Detection and Response (EDR) Supported Threat Detection and Response (TDR) Supported Managed Endpoint Detection and Response Supported Incident Management Retainer Supported Emergency Incident Response Supported SafeData Supported Environmental Table 17. Environmental specifications Feature OptiPlex 5080 Tower Recyclable packaging Yes BFR/PVC—free chassis No MultiPack packaging Yes (US only) (optional) Energy-Efficient Power Supply Standard ENV0424 compliant Yes NOTE: Wood‐based fiber packaging contains a minimum of 35% recycled content by total weight of wood‐based fiber. Packaging that contains without wood‐based fiber can be claimed as Not Applicable. Energy Star and Trusted Platform Module (TPM) Table 18. Energy Star and TPM Features Specifications Energy Star 8.0 Compliant configurations available Trusted Platform Module (TPM) 2.01,2 Integrated on system board Firmware-TPM (Discrete TPM disabled) Optional NOTE: 1TPM 2.0 is FIPS 140-2 certified. 2TPM is not available in all countries. Computer environment Airborne contaminant level: G1 as defined by ISA-S71.04-1985 20 Technical specifications Table 19. Computer environment Description Operating Storage Temperature range 10 °C–35°C (50 °F–95°F) -40°C-65°C (-40°F-149°F)

Relative humidity (maximum) 20% to 80% (non-condensing, Max dew point temperature = 26°C) 5% to 95% (non-condensing, Max dew point temperature = 33°C)

Vibration (maximum)* 0.26 GRMS random at 5 Hz to 350 Hz 1.37 GRMS random at 5 Hz to 350 Hz

Shock (maximum) Bottom half-sine pulse with a change in velocity of 50.8 cm/sec (20 in./sec) 105G half-sine pulse with a change in velocity of 133 cm/sec (52.5 in./sec)

Altitude (maximum) 3048 m (10,000 ft) 10,668 m (35,000 ft) * Measured using a random vibration spectrum that simulates user environment. † Measured using a 2 ms half-sine pulse when the hard drive is in use. Service and support NOTE: For more details on Dell Service Plans, see dell.com/learn/us/en/19/services/warranty-support- services. Table 20. Warranty Warranty 3 Years Basic Warranty with Hardware Service on-site service after remote diagnosis 4 Years Basic Warranty Extension 5 Years Basic Warranty Extension 3 Years ProSupport with Next Business Day on-site Service 4 Years ProSupport and Next Business Day on-site Service 5 Years ProSupport and Next Business Day on-site Service 3 Years ProSupport Plus for Client with Next Business Day on-site Service 4 Years ProSupport Plus for Client with Next Business Day on-site Service 5 Years ProSupport Plus for Client with Next Business Day on-site Service Table 21. Accidental damage services Accidental Damage Services 3 Years Accidental Damage Service 4 Years Accidental Damage Service 5 Years Accidental Damage Service Technical specifications 21 4 22 Software Software This chapter details the supported operating systems along with instructions on how to install the drivers. Topics: • Downloading Windows drivers Downloading Windows drivers Steps 1. Turn on the . 2. Go to Dell.com/support. 3. Click Product Support, enter the Service Tag of your , and then click Submit. NOTE: If you do not have the Service Tag, use the auto detect feature or manually browse for your model. 4. Click Drivers and Downloads. 5. Select the operating system installed on your . 6. Scroll down the page and select the driver to install. 7. Click Download File to download the driver for your . 8. After the download is complete, navigate to the folder where you saved the driver file. 9. Double-click the driver file icon and follow the instructions on the screen. 5 System setup CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain changes can make your computer work incorrectly. NOTE: Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen information for future reference. Use the BIOS Setup program for the following purposes: • Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive. • Change the system configuration information. • Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices. Topics: • Boot menu • Navigation keys • Boot Sequence • System setup options • Updating the BIOS in Windows • System and setup password Boot menu Press <F12> when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the system. Diagnostics and BIOS Setup options are also included in this menu. The devices listed on the boot menu depend on the bootable devices in the system. This menu is useful when you are attempting to boot to a particular device or to bring up the diagnostics for the system. Using the boot menu does not make any changes to the boot order stored in the BIOS. The options are: • UEFI Boot: ○ Windows Boot Manager • Other Options: ○ BIOS Setup ○ BIOS Flash Update ○ Diagnostics ○ Change Boot Mode Settings Navigation keys NOTE: For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the system. Keys Navigation Up arrow Moves to the previous field. Down arrow Moves to the next field. Enter Selects a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop-down list, if applicable. Tab Moves to the next focus area. System setup 23 Keys Navigation Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message that prompts you to save any unsaved changes and restarts the system. Boot Sequence Boot sequence enables you to bypass the System Setup–defined boot device order and boot directly to a specific device (for example: optical drive or hard drive). During the Power-on Self-Test (POST), when the Dell logo appears, you can: • Access System Setup by pressing F2 key • Bring up the one-time boot menu by pressing F12 key. The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are: • Removable Drive (if available) • STXXXX Drive NOTE: XXXX denotes the SATA drive number. • Optical Drive (if available) • SATA Hard Drive (if available) • Diagnostics NOTE: Choosing Diagnostics, displays the SupportAssist screen. The boot sequence screen also displays the option to access the System Setup screen. System setup options NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. General options Table 22. General Option Description System Information Displays the following information: • System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Manufacture Date, Ownership Date, and the Express Service Code. • Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channel Mode, Memory Technology, DIMM 1 Size, and DIMM 2 Size. • PCI Information: Displays Slot1_M.2, Slot2_M.2 • Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology. • Device Information: Displays SATA-0, M.2 PCIe SSD-2, LOM MAC Address, Video Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device. Boot Sequence Allows you to specify the order in which the computer attempts to find an operating system from the devices specified in this list. UEFI Boot Path Security This option controls whether or not the system prompts the user to enter the Admin password when booting a UEFI boot path from the F12 Boot Menu. Date/Time Allows you to set the date and time settings. Changes to the system date and time take effect immediately. .24 System setup System information Table 23. System Configuration Option Description Integrated NIC Allows you to control the onboard LAN controller. The option ‘Enable UEFI Network Stack’ is not selected by default. The options are: • Disabled • Enabled • Enabled w/PXE (default) NOTE: Depending on the computer and its installed devices, the items that are listed in this section may or may not appear. SATA Operation Allows you to configure the operating mode of the integrated hard drive controller. • Disabled = The SATA controllers are hidden • AHCI = SATA is configured for AHCI mode • RAID ON = SATA is configured to support RAID mode (selected by default) Drives Allows you to enable or disable the various drives onboard: • SATA-0 (enabled by default) • M.2 PCIe SSD-0 (enabled by default) Smart Reporting This field controls whether hard-drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default. USB Configuration Allows you to enable or disable the integrated USB controller for: • Enable USB Boot Support • Enable Front USB Ports • Enable Rear USB Ports All the options are enabled by default. Front USB Configuration Allows you to enable or disable the front USB ports. All the ports are enabled by default. Rear USB Configuration Allows you to enable or disable the back USB ports. All the ports are enabled by default. Audio Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by default. • Enable Microphone • Enable Internal Speaker Both the options are selected by default. Dust Filter Maintenance Allows you to enable or disable BIOS messages for maintaining the optional dust filter that is installed in your computer. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on the interval set. The option Disabled is selected by default. • Disabled • 15 days • 30 days • 60 days • 90 days • 120 days • 150 days • 180 days System setup 25 Video screen options Table 24. Video Option Description Primary Display Allows you to select the primary display when multiple controllers are available in the system. • Auto (default) • Intel HD Graphics NOTE: If you do not select Auto, the on-board graphics device will be present and enabled. Security Table 25. Security Option Description Admin Password Allows you to set, change, and delete the admin password. System Password Allows you to set, change, and delete the system password. Internal HDD-0 Password Allows you to set, change, and delete the computer’s internal hard drive password. Password Configuration Allows you to control the minimum and maximum number of characters that are allowed for an administrative password and the system password. The range of characters is between 4 and 32. Password Bypass This option lets you bypass the System (Boot) Password and the internal hard drive password prompts during a system restart. • Disabled — Always prompt for the system and internal HDD password when they are set. This option is disabled by default. • Reboot Bypass — Bypass the password prompts on Restarts (warm boots). NOTE: The system will always prompt for the system and internal HDD passwords when powered on from the off state (a cold boot). Also, the system will always prompt for passwords on any module bay HDDs that may be present. Password Change This option lets you determine whether changes to the System and Hard Disk passwords are permitted when an administrator password is set. Allow Non-Admin Password Changes - This option is enabled by default. UEFI Capsule Firmware Updates This option controls whether this system allows BIOS updates via UEFI capsule update packages. This option is selected by default. Disabling this option will block BIOS updates from services such as Microsoft Windows Update and Linux Vendor Firmware Service (LVFS). TPM 2.0 Security Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system. • TPM On (default) • Clear • PPI Bypass for Enable Commands • PPI Bypass for Disable Commands • PPI Bypass for Clear Commands • Attestation Enable (default) • Key Storage Enable (default) • SHA-256 (default) Choose any one option: • Disabled • Enabled (default) 26 System setup Table 25. Security(continued) Option Description Absolute This field lets you Enable, Disable or permanently Disable the BIOS module interface of the optional Absolute Persistence Module service from Absolute Software. • Enabled - This option is selected by default. • Disable • Permanently Disabled Chassis Intrusion This field controls the chassis intrusion feature. Choose any one of the options: • Disabled (default) • Enabled • On-Silent Admin Setup Lockout Allows you to prevent users from entering Setup when Admin password is set. This option is not set by default. Master Password Lockout Allows you to disable master password support. Hard Disk passwords need to be cleared before the settings can be changed. This option is not set by default. SMM Security Mitigation Allows you to enable or disable additional UEFI SMM Security Mitigation protections. This option is not set by default. Secure boot options Table 26. Secure Boot Option Description Secure Boot Enable Allows you to enable or disable Secure Boot feature • Secure Boot Enable This option is not selected by default. Secure Boot Mode Allows you to modify the behavior of Secure Boot to allow evaluation or enforcement of UEFI driver signatures. • Deployed Mode (default) • Audit Mode Expert key Management Allows you to manipulate the security key databases only if the system is in Custom Mode. The Enable Custom Mode option is disabled by default. The options are: • PK (default) • KEK • db • dbx If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear. The options are: • Save to File- Saves the key to a user-selected file • Replace from File- Replaces the current key with a key from a user-selected file • Append from File- Adds a key to the current database from a user-selected file • Delete- Deletes the selected key • Reset All Keys- Resets to default setting • Delete All Keys- Deletes all the keys NOTE: If you disable the Custom Mode, all the changes made will be erased and the keys will restore to default settings. System setup 27 Intel Software Guard Extensions options Table 27. Intel Software Guard Extensions Option Description Intel SGX Enable This field specifies you to provide a secured environment for running code/storing sensitive information in the context of the main OS. Click one of the following options: • Disabled • Enabled • Software controlled—Default Enclave Memory Size This option sets SGX Enclave Reserve Memory Size Click one of the following options: • 32 MB • 64 MB • 128 MB—Default Performance Table 28. Performance Option Description Multi Core Support This field specifies whether the process has one or all cores enabled. The performance of some applications improves with the additional cores. • All—Default • 1 • 2 • 3 Intel SpeedStep Allows you to enable or disable the Intel SpeedStep mode of processor. • Enable Intel SpeedStep This option is set by default. C-States Control Allows you to enable or disable the additional processor sleep states. • C states This option is set by default. Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor. • Enable Intel TurboBoost This option is set by default. Hyper-Thread Control Allows you to enable or disable the HyperThreading in the processor. • Disabled • Enabled—Default 28 System setup Power management Table 29. Power Management Option Description AC Recovery Determines how the system responds when AC power is re-applied after a power loss. You can set the AC Recovery to: • Power Off • Power On • Last Power State This option is Power Off by default.

Enable Intel Speed Shift Technology Allows you to enable or disable Intel Speed Shift Technology support. The option Enable Intel Speed Shift Technology is set by default.

Auto On Time Sets time to automatically turn on the computer. Time is kept in standard 12-hour format (hour:minutes:seconds). Change the startup time by typing the values in the time and AM/PM fields.NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled. Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled. • Disabled • Enabled in S5 only • Enabled in S4 and S5 . USB Wake Support Allows you to enable the USB devices to wake the computer from standby mode. The option "Enable USB Wake Support" is selected by default Wake on LAN/WWAN This option allows the computer to power up from the off state when triggered by a special LAN signal. This feature only works when the computer is connected to AC power supply. • Disabled - Does not allows the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN. • LAN or WLAN - Allows the system to be powered on by special LAN or wireless LAN signals. • LAN Only - Allows the system to be powered on by special LAN signals. • LAN with PXE Boot - A wakeup packet sent to the system in either the S4 or S5 state, that will cause the system to wake-up and immediately boot to PXE. • WLAN Only - Allows the system to be powered on by special WLAN signals. This option is Disabled by default. Block Sleep Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default. Post behavior Table 30. POST Behavior Option Description Adapter Warnings This option lets you choose whether the system displays warning messages when you use certain power adapters. This option is enabled by default. Numlock LED Allows you to enable or disable the Numlock feature when your computer starts. This option is enabled by default. Keyboard Errors Allows you to enable or disable the keyboard error reporting when the computer starts. The option Enable Keyboard Error Detection is enabled by default. Fast Boot This option can speed up the boot process by bypassing some compatibility steps: System setup 29 Table 30. POST Behavior(continued) Option Description • Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or the previous POST did not complete. • Thorough — The system does not skip any steps in the boot process. • Auto — This allows the operating system to control this setting (this works only when the operating system supports Simple Boot Flag). This option is set to Thorough by default. Extend BIOS POST Time This option creates an additional pre-boot delay. • 0 seconds (default) • 5 seconds • 10 seconds Full Screen Logo This option will display full screen logo if your image match screen resolution. The option Enable Full Screen Logo is not set by default. Warnings and Errors This option causes the boot process to only pause when warning or errors are detected. Choose any one of the option: • Prompt on Warnings and Errors - default • Continue on Warnings • Continue on Warnings and Errors Virtualization support Table 31. Virtualization Support Option Description Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by the Intel Virtualization technology. • Enable Intel Virtualization Technology This option is set by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by the Intel Virtualization technology for direct I/O. • Enable VT for Direct I/O This option is set by default. Wireless options Table 32. Wireless Option Description Wireless Device Enable Allows you to enable or disable the internal wireless devices. The options are: • WLAN/WiGig • Bluetooth All the options are enabled by default. 30 System setup Maintenance Table 33. Maintenance Option Description Service Tag Displays the service tag of your computer. Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. SERR Messages Controls the SERR message mechanism. This option is set by default. Some graphics cards require that the SERR message mechanism be disabled. BIOS Downgrade Allows you to flash previous revisions of the system firmware. • Allow BIOS Downgrade This option is set by default. Data Wipe Allows you to securely erase data from all internal storage devices. • Wipe on Next Boot This option is not set by default. BIOS Recovery BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted BIOS from a recovery file on the HDD or an external USB key. NOTE: BIOS Recovery from Hard Drive field must be enabled. Always Perform Integrity Check—Performs integrity check on every boot. First Power On Date Allows you the set Ownership date. The option Set Ownership Date is not set by default. System logs Table 34. System Logs Option Description BIOS events Allows you to view and clear the System Setup (BIOS) POST events. Advanced configuration Table 35. Advanced configuration Option Description ASPM Allows you to set the ASPM level. • Auto (default) - There is handshaking between the device and PCI Express hub to determine the best ASPM mode supported by the device • Disabled - ASPM power management is turned off at all time • L1 Only - ASPM power management is set to use L1 SupportAssist System Resolution Option Description

Auto OS Recovery Threshold Allows you to control the automatic boot flow for SupportAssist System. Options are: System setup 31

Option Description • Off • 1 • 2 (Enabled by default) • 3

SupportAssist OS Recovery Allows you to recover the SupportAssist OS Recovery (Enabled by default).

BIOSConnect BIOSConnect enable or disable cloud Service OS upon absence of Local OS Recovery (Enabled by default). Updating the BIOS in Windows Prerequisites It is recommended to update your BIOS (System Setup) when you replace the system board or if an update is available. About this task NOTE: If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re enabled after the BIOS update is completed. Steps 1. Restart the computer. 2. Go to Dell.com/support. • Enter the Service Tag or Express Service Code and click Submit. • Click Detect Product and follow the instructions on screen. 3. If you are unable to detect or find the Service Tag, click Choose from all products. 4. Choose the Products category from the list. NOTE: Choose the appropriate category to reach the product page. 5. Select your computer model and the Product Support page of your computer appears. 6. Click Get drivers and click Drivers and Downloads. The Drivers and Downloads section opens. 7. Click Find it myself. 8. Click BIOS to view the BIOS versions. 9. Identify the latest BIOS file and click Download. 10. Select your preferred download method in the Please select your download method below window, click Download File. The File Download window appears. 11. Click Save to save the file on your computer. 12. Click Run to install the updated BIOS settings on your computer. Follow the instructions on the screen. Updating BIOS on systems with BitLocker enabled CAUTION: If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an unnecessary operating system re- install. For more information on this subject, see Knowledge Article: dell.com/support/article/sln153694 32 System setup Updating your system BIOS using a USB flash drive About this task If the system cannot load into Windows but there is still a need to update the BIOS, download the BIOS file using another system and save it to a bootable USB Flash Drive. NOTE: You will need to use a bootable USB Flash drive. Please refer to the following article for further details: dell.com/support/article/sln143196/ Steps 1. Download the BIOS update .EXE file to another system. 2. Copy the file e.g. O9010A12.EXE onto the bootable USB Flash drive. 3. Insert the USB Flash drive into the system that requires the BIOS update. 4. Restart the system and press F12 when the Dell Splash logo appears to display the One Time Boot Menu. 5. Using arrow keys, select USB Storage Device and click Return. 6. The system will boot to a Diag C:\> prompt. 7. Run the file by typing the full filename e.g. O9010A12.exe and press Return. 8. The BIOS Update Utility will load, follow the instructions on screen. Figure 1. DOS BIOS Update Screen System and setup password Table 36. System and setup password Password type Description System password Password that you must enter to log on to your system. Setup password Password that you must enter to access and make changes to the BIOS settings of your computer. You can create a system password and a setup password to secure your computer. CAUTION: The password features provide a basic level of security for the data on your computer. CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended. System setup 33 NOTE: System and setup password feature is disabled. Assigning a system setup password Prerequisites You can assign a new System or Admin Password only when the status is in Not Set. About this task To enter the system setup, press F2 immediately after a power-on or reboot. Steps 1. In the System BIOS or System Setup screen, select Security and press Enter. The Security screen is displayed. 2. Select System/Admin Password and create a password in the Enter the new password field. Use the following guidelines to assign the system password: • A password can have up to 32 characters. • The password can contain the numbers 0 through 9. • Only lower case letters are valid, upper case letters are not allowed. • Only the following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`). 3. Type the system password that you entered earlier in the Confirm new password field and click OK. 4. Press Esc and a message prompts you to save the changes. 5. Press Y to save the changes. The computer reboots. Deleting or changing an existing system setup password Prerequisites Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing System and Setup password. You cannot delete or change an existing System or Setup password, if the Password Status is Locked. About this task To enter the System Setup, press F2 immediately after a power-on or reboot. Steps 1. In the System BIOS or System Setup screen, select System Security and press Enter. The System Security screen is displayed. 2. In the System Security screen, verify that Password Status is Unlocked. 3. Select System Password, alter or delete the existing system password and press Enter or Tab. 4. Select Setup Password, alter or delete the existing setup password and press Enter or Tab. NOTE: If you change the System and/or Setup password, re enter the new password when prompted. If you delete the System and Setup password, confirm the deletion when prompted. 5. Press Esc and a message prompts you to save the changes. 6. Press Y to save the changes and exit from System Setup. The computer restarts. 34 System setup 6 Getting help Topics: • Contacting Dell Contacting Dell Prerequisites NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. About this task Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1. Go to Dell.com/support. 2. Select your support category. 3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page. 4. Select the appropriate service or support link based on your need. Getting help 35


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply