Free English CRIMESTOPPER SV-5430B (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD CRIMESTOPPER SV-5430B (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What parts are included in the parts list for the CRIMESTOPPER SV-5430B?
The parts list for the CRIMESTOPPER SV-5430B includes the following items:
1. Camera x 1
2. 26ft Extension Cable x 1
3. Adapter Cable with Switch buttons x 1
4. Power wire x 1
What are the key features of the CRIMESTOPPER SV-5430B?
The key features of the CRIMESTOPPER SV-5430B are:
1/3.7 Color CMOS (PC3030)
Zinc Metal Full-Frame License Plate Camera
Waterproof IP67
480 TVL Horizontal Resolution
170 Degrees Wide Viewing Angle
Built-In True 3watt white LED lights for Night Vision
Reverse & Non-Reverse view video switch
LED lights ON/OFF switch
Distance Gridline ON/OFF switch
What are the technical specifications of the CRIMESTOPPER SV-5430B?
| Specification | Details |
|---|---|
| Image sensor | PC3030 |
| Total Pixels | NTSC 648(H)*488(V) |
| Resolution | 480 TVL |
| Min. Illumination | 0.1 LUX |
| Video Output | 1.0V±0.2V |
| Power Supply | DC 9V-16V |
| Rated Current | 40±10mA(LED ON 300mA) |
| Operating Temp. | -20°C ~+ 70°C |
How do I wire the CRIMESTOPPER SV-5430B and operate the selector buttons?
Follow these instructions for wiring and operating the CRIMESTOPPER SV-5430B:
1. Yellow RCA Video out to monitor camera video input
2. Red wire to 12VDC reverse light power
3. Black wire to ground
4. Gridline Button: Distance gridline on/off selector (Default is set to on: up position)
5. LED On/Off Button: LED light on/off selector (Default is set to off: down position)
6. Reverse/Non-Reverse Button: Reverse to Non-Reverse image selector (Default is set to reverse image: up position)
What must be done for button changes to take effect on the CRIMESTOPPER SV-5430B?
In order for the button changes to take affect on the CRIMESTOPPER SV-5430B, camera power must be restarted.
What safety cautions should be followed when using the CRIMESTOPPER SV-5430B?
Please observe the following cautions regarding the CRIMESTOPPER SV-5430B:
The LED lights and camera must be turned off if the vehicle is not in reverse mode.
Professional technician is recommended for installing and wiring this item to a vehicle.
When the LED’s are on, it will generate heat. Do not touch the camera when the LED’s have been on for a long period of time.
Do not look directly into the LED’s when they are lit.
Do not depend solely on the back up camera. It is used as an assistance while backing up.
CLICK HERE TO DOWNLOAD CRIMESTOPPER SV-5430B (01) PDF DOCUMENT