CRESSI KING (01) PDF MANUAL

CRESSI KING (01) PDF SUMMARY:

How do you change display information?

Press and hold the ESC button to change the display information.

How do you enter a function?

Long press the SEL button to enter a function.

How do you confirm a selection?

Long press the SEL button to confirm a selection.

How do you activate the light function?

Long press the SEL button to activate the light function in the following areas:

• Top menu
• Chrono mode
• Free mode

What does a short press of the ESC button do?

• Returns to the TOP menu.
• Ends the session in Free Mode.

What does a short press of the SEL button do?

• Increases one step.

What does a short press of the ESC button do?

• Decreases one step.

How do you change the time information?

Press the ESC button to scroll through the SET options and confirm your selection by pressing the SEL button. You can set:

• Hours
• Minutes
• Seconds

How do you use the Chrono function?

You can use the SEL and ESC buttons to:

• Start/Stop
• Lap/Reset

How do you set the timer?

1. Scroll through the SET options using the ESC button.
2. Confirm your selection by pressing the SEL button.
3. Set the following:
   • Hours
   • Minutes
   • Seconds

How do you use the Dual Timer?

1. Scroll through the SET options using the ESC button.
2. Confirm your selections by pressing the SEL button.
3. Set the following for both Phase 1 and 2:
   • Seconds
   • Minutes
4. Set the number of cycles and cycle direction.

How do you change the mode?

1. Scroll through the MODE options using the ESC button.
2. Confirm your selection by pressing the SEL button.

What functions are available in the Off function?

Only the surface functions are enabled when in the Off function.

What are the available modes?

• Free Mode
• Off Mode

How do you set the time?

1. Scroll through the SET options using the ESC button.
2. Confirm your selection by pressing the SEL button.
3. Set the following:
   • Hour (12 or 24 hour format)
   • Minute
   • Day or month (D-M or M-D format)
   • Month or day
   • Year

How do you set the 2nd time?

1. Scroll +/- 30 minutes using the ESC button.
2. Confirm your selection by pressing the SEL button.

What settings can be adjusted in the Free Set?

1. Scroll through the SET options using the ESC button.
2. Confirm your selections by pressing the SEL button.
3. Adjust the following settings:
   • Taravana Protection Level: OFF/L1-L8
   • Bloodshift protection: OFF/30-120m(98-349FT)
   • Surf Time Alarm: OFF/1’:00”-10’:00”
   • Depth Alarm: OFF/10-120m(33-394FT) 1/2/3/4/5
   • Dive Time Alarm: OFF/0’:10”-6’:00”
   • Step Depth Alarm: OFF/2-25m(6-82FT)
   • Hydration Time Alarm: OFF/1-4 HOURS
   • Water Salinity: Fresh/Salt
   • Logbook Sample Rate

What can be found in the Logbook?

• Change Units: C° m / F-FT
• History:
  • PC-LINK
  • MAX DEPTH
  • HISTORY
  • HOURS IN USE
  • DIVE TIME
  • DEPTH
  • SPEED
  • MAX DEPTH LAST DIP

What can be viewed in the History?

You can connect the interface and download the latest software updates for USB (PC/MAC).

What information can be viewed for each session dip?

• Total session dips
• Time
• Surface
• Max depth last dip
• Surf time
• Recovery time
• Dive time

How do you end a session?

1. Scroll through YES/NO options using the ESC button.
2. Confirm your selection by pressing the SEL button.

What information can be viewed for a selected dip?

• Dip number
• Surf time selected dip
• Max dip speed up/down (displayed alternately)
• Min. Temp selected dip

What are the available alarm settings and their adjustable ranges?

• Surf Time Alarm: SURF-T F1-F5 (surf time factor) /1’:00”-10’:00”/OFF
• Depth Alarm: DEPTH 1 – 50 m. (3-164 FT)/OFF
• Step Depth Alarm: STEP 2 – 25 m. (6-82 FT)/OFF
• Dive Time Alarm: DIVE-T 0’:10”-6’:00”/OFF

What should you do when the battery is low?

You should change the battery soon.

What happens when the battery needs to be changed?

You must change the battery. Dive function is disabled.

What is the battery capacity guarantee?

The battery capacity guarantees operation that goes far beyond the guarantee time.

What will void the warranty?

If the watch is opened before 2 years from the date of purchase, the warranty is void.