COR 5C (01) PDF Document

The buttons on the COR 5C thermostat have the following functions:

• A. Fan mode (On/Auto)
• B. Menu options (Schedule, Alerts, Settings, Wi-Fi®)
• C. Info/Next (toggle between various status screens)
• D. Change equipment mode (Heat, Cool, etc.)
• E. Adjust temperature or navigate through menu options
• F. Hold/Done

The screen of the COR 5C thermostat displays the following:

• G. Weather
• H. Active equipment mode
• I. Wi-Fi® signal strength
• J. Temperature set point
• K. Indoor temperature
• L. Information display

You can use your mobile app to adjust your comfort settings from anywhere in the home, or while you’re away.

Comfort Profiles allow you to dial in your preferred comfort level with temperature and fan settings. You can set up standard profiles like Wake, Home, Away and Sleep or create your own custom profile.

The Guided Scheduling feature will prompt you with simple questions to help you customize a schedule which meets your desired comfort level and lifestyle for your COR 5C thermostat.

Geofencing will allow you to put your COR 5C thermostat into Away mode every time you leave your home, saving you energy without thinking about it. This feature is available on the Wi-Fi® connected thermostat.

Starting today, the COR 5C thermostat will begin tracking your energy costs and learning about your home to help you decrease your energy usage. In about a month, your first COR 5C energy report will be available on your mobile app, and you’ll see how your system has performed. After creating your schedule, you will be given an estimated savings for the month. You can use this valuable information to optimize energy usage and future savings.

To perform a Simple Wi-Fi® Setup Using Your Smartphone for the COR 5C thermostat:

Open the COR 5C/7C Thermostat app on your phone:

1. Touch “No Login?” (below the Sign In button).
2. Touch “Let’s Get Started.”
3. “Is your thermostat installed on the wall?” Select YES if installed by your dealer.
4. “Is your thermostat connected to Wi-Fi?” Select NO to set up Wi-Fi.
5. The app or Section B below will guide you through the process to get a list of local networks for your thermostat.

On the thermostat:

1. From the main screen press MENU.
2. Use the arrows until “WI-FI” is blinking. Touch NEXT.
3. Use the arrows until “SCAN WI-FI” is blinking. Touch NEXT.
4. Use the arrows until your network name is showing. Touch MENU once to go back to the Wi-Fi menu.
5. Use the arrows until “SETUP-N-APP” is blinking. Touch NEXT.
6. Use the arrows until “ENABLED” is showing.
7. Touch DONE to return Home.
8. When the thermostat says AP ACTIVE below the room temperature, continue to next screen in app.

Mobile app instructions for iPhone when connecting the COR 5C thermostat to Wi-Fi:

1. Under iPhone settings, go to Wi-Fi® settings and select the COR 5C thermostat.
2. Enter the thermostat’s password: 12345678. Select Join.
3. Once successful, go back to the mobile app.
4. Select “I’m Connected.”
5. Once connected to the thermostat, the mobile app will display a list of local networks. Touch Next.
6. Enter your home router’s password and select “Connect Thermostat to Wi-Fi.”

Mobile app instructions for Android when connecting the COR 5C thermostat to Wi-Fi:

1. Touch “See Local Networks” and select the COR 5C thermostat.
2. Enter the thermostat’s password: 12345678. Select Join.
3. Once successful, go back to the mobile app.
4. Select your network and touch Next.
5. Enter your home router’s password and select “Connect Thermostat to Wi-Fi.”

To set up Wi-Fi weather on the COR 5C thermostat using the ZIP/postal code:

1. On the thermostat, touch MENU.
2. Use the arrows until “WI-FI” is blinking. Touch NEXT.
3. Use the arrows until “POSTAL CODE” is blinking. Touch NEXT.
4. Use the arrows to change each number. Touch NEXT to move to the next number.
5. Repeat until all numbers are entered.
6. Touch DONE to return to the home screen. It may take up to 15 minutes for the weather to show on the thermostat.

To connect the COR 5C thermostat to the mobile app after the thermostat is connected to Wi-Fi, follow these steps from the mobile app sign-in screen:

1. Touch “No Login?” (below the Sign In button).
2. Touch “Let’s Get Started.”
3. “Is your thermostat installed on the wall?” Select YES.
4. “Is your thermostat connected to Wi-Fi?” Select YES.
5. Read and accept the Terms & Conditions agreement.

Get serial number and registration code:

1. From the thermostat, you will need two pieces of information to create your account in the app:
2. Get the four-digit registration code:
   1. Touch MENU.
   2. Use the arrows until “WI-FI” is blinking.
   3. Touch NEXT.
   4. Use the arrows until “REG CODE” is blinking.
   5. Touch NEXT. Thermostat will display “REQUESTING.” Four-digit registration code will display. (This may take a minute. If it says OFFLINE, ensure the thermostat is connected to Wi-Fi first.)
   6. Enter the registration code in the app. The REG code will only be valid for 20 minutes.
3. Get the serial number (in Wi-Fi menu):
   1. Touch MENU.
   2. Use the arrows until “SERIAL NUM” is blinking.
   3. Touch NEXT.
   4. Enter the serial number in the app.
   5. In the app, touch NEXT to create your account.
4. Fill out the requested information. Be sure to verify it is entered correctly. Your email address is your login ID.
5. Scroll down to complete the Home Setup section. This information is used to calculate your monthly energy reports. The reports will be available in the app each month.
6. Touch NEXT.
7. The mobile app will now ask for your location. Either use the location services address or enter the address where the thermostat is installed.
8. You will then be prompted to enter your schedule. Continue through scheduling to complete the setup process.