FREE ENGLISH COMMAX DR-2L (01) PDF USER GUIDE
FREE ENGLISH COMMAX DR-2L (01) PDF USER MANUAL
FREE ENGLISH COMMAX DR-2L (01) PDF OWNER GUIDE
FREE ENGLISH COMMAX DR-2L (01) PDF OWNER MANUAL
FREE ENGLISH COMMAX DR-2L (01) PDF REFERENCE GUIDE
FREE ENGLISH COMMAX DR-2L (01) PDF INSTRUCTION GUIDE
FREE ENGLISH COMMAX DR-2L (01) PDF REFERENCE MANUAL
FREE ENGLISH COMMAX DR-2L (01) PDF INSTRUCTION MANUAL
FREE ENGLISH COMMAX DR-2L (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD COMMAX DR-2L (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the general precautions for using COMMAX products?
Please carefully read the User’s Guide, in particular, precautions for safety, before using a product and follow instructions to use a product exactly. The company is not responsible for any safety accidents caused by abnormal operation of the product.
How do I install the DR-2L door station unit?
1. Mount bracket on the wall with screws(T4 x 18).
2. Connect the Room station cables to the door station cables.
3. Place door station on the bracket and fix it with provided screws. (M4 x 10)
What are the main parts of the DR-2L door station unit?
The main parts on the front side of the unit are:
• Speaker
• Call button
• Microphone
What are the specifications for the DR-2L door station unit?
| MODEL | DR-2L |
| Wiring system(household) | Door Phone 2-Wire System(Nonpolar) |
| Communication method | Full Duplex |
| Rated voltage | 9V DC (Supplied from the door phone) (Max 0.3W) |
| Operating Temperature | -10°C ~ +40°C |
| Dimensions(mm) | 186(W) X 126(H) X 23(D)mm |
| Weight(g) | 280g |
What are the warnings and cautions for the DP-LA01M and DP-LA01S door phones?
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
The product contains uninsulated “dangerous voltage” within its enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The literature accompanying the appliance contains important operating and maintenance (servicing) instructions.
CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
What are the main parts of the DP-LA01M and DP-LA01S door phones?
DP-LA01M:
• Handset
• Call Button
• Door Open Button
• Call Volume Switch
• Power Cord
DP-LA01S:
• Handset
• Call Button
• Door Open Button
• Power Cord
How do I communicate with the door station using the DP-LA01M or DP-LA01S?
1. When a visitor presses the calling button on the door station, both the Master and Slave handsets will ring. The volume can be adjusted by the switch on the side of the handset (only on model DP-LA01M).
2. Pick up one handset (either Master or Slave) to start the communication.
3. After checking the visitor, push the door open button to open the door.
How do I communicate between handsets using the DP-LA01M or DP-LA01S?
1. Pick up the handset to call another handset. The other handset will be called while the button is being pushed.
2. When the other party picks up their phone, the conversation begins.
3. If a visitor at the door station presses the call button while the handsets are in use, the handset will ring.
4. Hang up the phone to finish the conversation between handsets. To speak with the visitor, pick up the handset again, and it will automatically connect to the door unit.
How should the DP-LA01M/LA01S system be wired?
The system wiring connects the Doorstation, Master roomstation, and Sub roomstation.
• Connect terminals ① through ⑥ of the Master roomstation to the corresponding terminals ① through ⑥ of the Sub roomstation.
• Connect the Doorstation to terminals S1 and S2 on the Master roomstation.
• The Master roomstation is connected to a power source.
• An Electric Door Release is connected to the Sub roomstation, which is connected to its own separate power source.
What are the specifications for the DP-LA01M and DP-LA01S door phones?
| POWER SOURCE | AC 110/120/220/230/240V, 50-60Hz |
| OUTPUT POWER | Call: High 400mW, Low 100mW Talk: 70mW |
| DISTANCE | 30m, 0.65ø (When talking to Master) 50m, 0.65ø (When talking to door station) |
| DIMENSION | DP-LA01M: 208(D) X 98(W) X 60(H)mm DP-LA01S: 208(D) X 98(W) X 65(H)mm |
| WEIGHT | DP-LA01M: 510g DP-LA01S: 675g |
CLICK HERE TO DOWNLOAD COMMAX DR-2L (01) PDF MANUAL