COMER RE418 (01) PDF MANUAL

COMER RE418 (01) PDF SUMMARY:

How do I connect the printer to a power source?

1. Confirm the printer is Power-off (O).
2. Connect the adapter to the printer.
3. Connect the adapter to one end of the power line.
4. Connect the other end of the Power line to the socket.

---

How do I connect the printer via USB?

1. Connect USB to the printer.
2. Connect USB to the PC mainframe.
3. Turn on the printer power to be Power- on (I).

---

How do I install consumables?

1. Open fixing seat, put in paper roll with printed face above.
2. Make paper front through paper guide, pull paper exceed rubber roller, adjust paper guide to fix the paper according to the paper width.
3. Close printer cover, press down to hear "ka"to lock.

---

How do I perform an outside-scroll installation?

1. Make paper front through paper-feeding slot on the back of printer, confirm the printed face on above.
2. Open fixing seat, push up the L seat to lock.
3. Make paper front through paper guide, pull paper exceed rubber roller, adjust paper guide to fix the paper according to the paper width.
4. Close printer cover, press down to hear "ka"to lock.

---

How do I install the Windows driver and perform a print test?

1. Ensure the printer is ON, download the Windows driver and run the downloaded software, prompt to complete.
2. Test the printer, click on the (Device and Printer) in the computer to find the installed printer.
3. Click the right mouse button and select (Printer Properties). Click (print Test Page). If the print test is ok, the installation completes.
4. Select the printing software used and set the appropriate paper size to start printing.

---

How do I install the MAC driver?

1. Ensure the printer is ON, download the Mac driver and run the downloaded software, prompt to complete installation.
2. Click on my computer (System Preferences), select (Printers and Scanners), If the page displays your printer information, the installation succeeds.
3. Select your common printing software, set the right paper size, then you can start printing.

---

What is the function of the FEED button in Standby mode?

Pressing the Feed button in standby mode will feed in a blank paper automatically.

---

What is the function of the FEED button when in Standby mode and pressed for 3 seconds?

Pressing the Feed button for 3 seconds will enter into the learn mode of cover sheet.

---

What is the function of the FEED button if you hold it, then release it after powering on the printer?

It will print out a self test page.

---

What is the function of the FEED button if you press it for 10 seconds with the printer cover open?

It will perform a factory reset.

---

What is the function of the FEED button during continuous printing?

Pressing the FEED button during printing will pause the print.

---

What is the function of the FEED button when the printer is in print pause?

Pressing it will resume printing.

---

What does it mean when the indicator light is ON?

The printer is in standby mode.

---

What does it mean when the indicator light is flashing and the buzzer is warning twice?

There is a movement error.

---

What does it mean when the indicator light is flashing and the buzzer is warning three times?

There is a lack of paper error.

---

What does it mean when the indicator light is flashing and the buzzer is warning five times?

The printer is overheating.

---

What does it mean when the indicator light is flashing and the buzzer is warning six times?

The printer cover is open.

---

What does it mean when the indicator light is flashing and the buzzer is warning seven times?

There is a seam standard error.

---

What are some tips for using the printer?

• To ensure optimal print quality, use the original factory power adapter.
• Avoid the poor quality paper which wear the printer greatly, causing damage the heat of the printer.
• Regularly or at the print unclear, please clean the print head, to ensure high-quality print results.
• When replacing the paper specification(including the thickness of the paper, quality), suggest doing “Automatic identification label”.
• If the poor quality of the paper, and ensure the heating has been cleaning, If print effect could still not meet the requirement, you can adjust the appropriate high concentration of printing, the range of Oto 15 levels.
• The product have paper absorption function, please load the paper in the rear suction mode. Open cover will cause the waste of paper.

---

What is the warranty for the Comer thermal printer?

The Comer thermal printer is covered by a one-year warranty. In the unlikely event that any issues arise, contact Comer customer service for troubleshooting or a replacement. For questions or suggestions, email the service01@raycloud.com. Further information is available at printer.kuaimai.com.