CASIO W-CLO.I (01) PDF MANUAL

A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using the clock.

Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration.

Insert a battery into battery compartment (1) with polarity as indicated.

Turn the hour/minute adjuster (2) in either direction.

Remove the battery to stop the second hand at 12 o’clock position. Replace the battery at a time signal to restart the second hand on the correct second.

The start of second hand may be delayed depending on the timing of your switch operation.

Low battery power is indicated when timekeeping slows or stops completely. Should either of these symptoms occur, replace the battery immediately. Do not leave a low or dead battery in the clock.

To replace the battery:

1. Remove the old battery.

2. Load a new battery, making sure that its positive (+) and negative (-) ends are facing correctly. Loading a battery incorrectly can cause it to burst and damage the clock.

Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician immediately.

Be sure to load the battery with its positive (+) and negative (-) ends facing correctly.

Never charge the battery.

Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin.

Replace the battery at least once a year, even if the current battery is working normally.

Accuracy at normal temperature: ±20 seconds a month

Battery life: Approx. 1 year

Battery: One AA size battery (Type: LR6)

Ambient temperature range: -10°C to 50°C (14°F to 122°F)