CASIO 2349 (01) PDF Document

To change from mode to mode on the CASIO 2349, press the C button. The sequence of modes is as follows: Timekeeping Mode, World Time Mode, Telememo Mode, Alarm Mode, Stopwatch Mode, and Hand Setting Mode.

To set the time and date on your CASIO 2349, follow these steps:

1. While in the Timekeeping Mode, hold down the A button until the seconds digits flash on the display.

2. Press the C button to move the flashing in the following sequence: Seconds, DST, City Code, Hour, Minutes, Day, Month, Year, and 12/24-hour format.

3. While the seconds setting is flashing, press the D button to reset it to 00. If you press D while the seconds are in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the range is 00 to 29, the minutes remain unchanged.

4. While the DST (Daylight Saving Time) setting is selected, press the D button to toggle it on or off.

5. While the city code setting is selected, use the D (+) and B (-) buttons to scroll through the available codes until your home city is displayed.

6. For other settings (Hour, Minutes, Day, Month, Year, 12/24), use the D (+) or B (-) buttons to change the flashing value. Holding these buttons changes the settings at high speed.

7. Once you have made your settings, press the A button to exit the setting screen.

Note: The day of the week is automatically set based on the date, which can be set between January 1, 2000, and December 31, 2039.

The CASIO 2349 features an auto light switch that automatically illuminates the display for about 1.5 seconds when you position the watch towards your face. To operate this function, move the watch to a position parallel to the ground and then tilt it towards you approximately 40 degrees.

Important considerations for the CASIO 2349 auto light switch:

The backlight may not illuminate if the watch face is more than 15 degrees off parallel to the left or right.

Static electricity or magnetic force can interfere with the function. If it doesn’t light, try moving the watch back to the starting position and tilting it again. If this fails, drop your arm to your side and bring it back up.

In order to protect against running down the battery, the auto light switch function is automatically turned off approximately six hours after you turn it on.

Avoid wearing the watch on the inside of your wrist, as this causes the auto light switch to operate unnecessarily, shortening battery life.

To toggle the auto light switch function on the CASIO 2349, ensure you are in the Timekeeping Mode. Hold down the D button for one or two seconds to turn the function on (an indicator will appear) or off (the indicator will disappear).

When using the backlight on the CASIO 2349, please observe the following warnings to avoid serious personal injury or accidents:

Never try to read your watch when mountain climbing or hiking in areas that are dark or have poor footing.

Never try to read your watch when running where there is danger of accidents, especially in areas with vehicular or pedestrian traffic.

Never try to read your watch when riding a bicycle, operating a motorcycle, or any other motor vehicle.

Ensure the auto light switch function is turned off before riding a bicycle or operating any motor vehicle to avoid sudden distractions.

The World Time Mode on the CASIO 2349 shows the current time in 27 cities across 29 time zones. To view different times:

1. Enter World Time Mode by pressing C.

2. Press the D button to scroll forward through the city codes. Holding down D scrolls at high speed.

3. When the desired city code is displayed, press the A button to view its current time.

4. To return to the city code screen, press the D button while the time screen is displayed.

To adjust the DST setting for a specific city on the CASIO 2349:

1. In the World Time Mode, use the D button to display the city code you wish to change.

2. Hold down the A button to toggle between Daylight Saving Time and Standard Time. The DST indicator will appear on the display when Daylight Saving Time is turned on for that city.

The CASIO 2349 Telememo Mode allows you to store up to 30 records, each with a name (up to 8 characters) and a phone number (up to 14 digits).

1. In Telememo Mode, press the D and B buttons simultaneously to display the blank screen.

2. Hold down the A button until a cursor appears on the display.

3. Use the D (+) and B (-) buttons to scroll through characters (Space, A to Z, 0 to 9, and symbols) at the cursor position.

4. Press the C button to move the cursor to the right.

5. After inputting the name, press C until the number input screen (indicated by “—–“) appears.

6. Use D (+) and B (-) to scroll through numbers, hyphens, or spaces for the phone number.

7. Press C to move the cursor for each digit of the number.

8. After inputting the name and number, press the A button to store the record. The message “SORT” will appear as the watch organizes the records alphabetically.

To manage Telememo records on the CASIO 2349, use the following procedures:

To Recall: In Telememo Mode, press D to scroll through names. Press A to view the phone number associated with a name.

To Edit: Scroll to the desired record, then hold down A until the cursor appears. Use C to move the cursor and D or B to change characters. Press A to save the changes.

To Delete: Scroll to the record you want to remove. Hold down A until the cursor appears. Press the D and B buttons simultaneously. The message “CLEAR” will appear, indicating the record is deleted. Press A to exit.

The CASIO 2349 allows you to set up to five daily alarms.

1. In Alarm Mode, press D to select the alarm you wish to set (Alarm 1 through Alarm 5) or the Hourly Time Signal screen.

2. Hold down A until the hour digits flash, which indicates the setting screen. This also automatically turns the alarm on.

3. Press C to switch the flashing between Hour and Minutes.

4. Use D (+) and B (-) to adjust the time. Ensure you set the time correctly as AM or PM if using the 12-hour format.

5. Press A to exit the setting screen.

6. To toggle an alarm or the hourly signal on/off without changing the time, press A while the specific alarm’s screen is displayed.

7. To stop the alarm sound, press any button. To test the alarm, hold down the D button while in Alarm Mode.

The stopwatch on the CASIO 2349 measures elapsed time, split times, and two finishes within a range of 59 minutes, 59.99 seconds.

Elapsed Time: Press D to start, D to stop, D to restart, D to stop again, and A to clear.

Split Time: Press D to start, A to view a split time (SPLIT flashes), A to release the split, D to stop, and A to clear.

Two Finishes: Press D to start. Press A when the first runner finishes to record their time. Press D when the second runner finishes. Press A to display the second runner’s time, then press A again to clear.

If the analog hands on the CASIO 2349 do not match the digital display, use the Hand Setting Mode to correct them:

1. Enter Hand Setting Mode by pressing C.

2. Hold down the A button until “SET” starts to flash on the display.

3. Press the D button to advance the hands by 20 seconds. Holding down D advances the hands at high speed.

4. Note that the hands can only be advanced forward. If you go past the desired time, you must advance them through a full 12-hour cycle to return to the correct setting.

5. Press A to exit the setting screen when the hands match the digital time.

The following character list is available for name entry in the CASIO 2349 Telememo Mode:

The following table lists the city codes and time differentials for the CASIO 2349 World Time Mode: