CANDY CI633CBB-1 (01) PDF Document

Free English CANDY CI633CBB-1 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD CANDY CI633CBB-1 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

What are the power specifications for the CANDY CI633CBB-1 induction hob?

The CANDY CI633CBB-1 induction hob has an installed electric power of 7200W, operates on a supply voltage of 220-240V~ 50/60Hz, has 3 cooking zones, and its product size (D×W×H in mm) is 590x520x58. The building-in dimensions (A×B in mm) are 560×490.

What is the procedure to start cooking on the CANDY CI633CBB-1 induction hob?

After power on, the buzzer beeps once, all indicators light up for 1 second then go out, indicating that the hob has entered the state of standby mode.

1. Touch the ON/OFF control. All indicators show “– “.

2. Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.

3. Touching the heating zone selection control, and an indicator next to the key will flash.

4. Select a heat setting by touching the “-” or “+” control.

If you do not choose a heat setting within 1 minute, the Induction hob will automatically switch off. You will need to start again at step 1.

You can modify the heat setting at any time during cooking.

What is the procedure when you have finished cooking on the CANDY CI633CBB-1 induction hob?

1. Touching the heating zone selection that you wish to switch off.

2. Turn the cooking zone off by scrolling down to”0”. Make sure the display shows”0”.

3. Turn the whole cooktop off by touching the ON/OFF control.

How do I know if a cooking zone is too hot to touch on the CANDY CI633CBB-1 induction hob?

“H” will show which means cooking zone is too hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still hot.

How do I activate the Boost function on a cooking zone of the CANDY CI633CBB-1 induction hob?

1. Select the zone with boost function (front left zone).

2. Touching the “plus” key until power level indication shows “P”.

How do I cancel the Boost function on the CANDY CI633CBB-1 induction hob?

1. Select the zone with boost function (front left zone).

2. Touching the “minus” key to cancel the Boost function, and select the level you want to set.

Boost function can only last for 5 minutes, after that the zone will go to level 9 automatically.

How do I use the Pause function on the CANDY CI633CBB-1 induction hob?

1. Press the Pause control, the heating zones stop working. All the zone indication show“||”.

2. Press the Pause control once again, all the heating zones will revert to its original setting.

The function is available when one or more heating zones are working.

If you don’t cancel the stop working mode within 30 minutes, the induction cooktop will automatically switch off.