Free English BROTHER DCP-T220 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD BROTHER DCP-T220 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I unpack the BROTHER DCP-T220 and check the components?
To unpack the BROTHER DCP-T220, remove the protective tape and the film covering the machine.
What are the notes to consider when unpacking the BROTHER DCP-T220?
The components of the BROTHER DCP-T220 may differ depending on your country. Save all packing materials and the box in case you must ship your machine. It is recommended to use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long (included in some countries).
How do I fill the ink tanks on my BROTHER DCP-T220 with starter ink?
1. Open the ink tank cover, remove the cap, and place it on the back of the cover.
2. Remove the film from the ink bottle and tighten the cap firmly.
3. Remove the nozzle cap and insert the bottle nozzle firmly into the ink tank so that the ink does not spill. The bottle is self-standing and the ink fills automatically until the bottle is empty. To fill the ink tank faster, squeeze the bottle on both sides.
4. When finished, remove the bottle, pointing the nozzle upward so the ink does not spill.
5. Replace the ink tank cap. Repeat this step for the other ink tanks, and then close the ink tank cover.
What should I be aware of when filling the ink tanks on my BROTHER DCP-T220?
Check the ink bottle model name on the label. Using the incorrect ink may cause damage to the BROTHER DCP-T220 machine.
How do I load plain Letter paper in the paper tray of my BROTHER DCP-T220?
Fan the paper well, then load plain Letter paper into the paper tray.
How do I start the initial cleaning on my BROTHER DCP-T220?
Press and hold the Color button for 3 seconds. The BROTHER DCP-T220 will then begin the initial cleaning process.
What does the BROTHER DCP-T220 do after the initial cleaning?
After the initial cleaning, the BROTHER DCP-T220 machine prints the Print Quality Check Sheet.
What should I do after the BROTHER DCP-T220 prints the Print Quality Check Sheet?
Check the Print Quality Check Sheet. If the print quality is poor, clean the print head.
How do I connect my BROTHER DCP-T220 to a computer or mobile device?
Visit the websites to download and install Brother software. Connect your BROTHER DCP-T220 machine and computer/mobile device to the same network. Follow the on-screen instructions.
How do I connect my BROTHER DCP-T220 to a computer via USB?
Use the USB port inside the machine, as shown in the image.
How are the machine settings of the BROTHER DCP-T220 configured?
The machine’s settings are set from the application (Brother iPrint&Scan or Brother Utilities) on your computer or mobile device.
What is the important notice for network security regarding the BROTHER DCP-T220?
The default password to manage the BROTHER DCP-T220 machine’s settings is located on the back of the machine and marked “Pwd”. It is recommended to immediately change the default password to protect your machine from unauthorized access.
What do the LED indications on the BROTHER DCP-T220 mean?
| Status | LED Indication | Description |
|---|---|---|
| Lit | Power LED, Warning LED, Ink LED | Machine is on |
| Blinking | Power LED, Warning LED, Ink LED | Varies based on context (Busy, Sleep, Paper Jam, etc.) |
| Standby | Power LED (slowly and faintly blinking) | Machine is in sleep mode |
What do the LED indications for “Good” and “Poor” print quality on the BROTHER DCP-T220 mean?
| Print Quality | Color LED | Black LED |
|---|---|---|
| Good | All segments lit | All segments lit |
| Poor | Few segments lit | Few segments lit |
What do the LED indications for Wi-Fi on the BROTHER DCP-T220 mean?
| Status | Wi-Fi LED |
|---|---|
| Off | Wi-Fi is deactivated |
| Connecting | Wi-Fi LED is blinking |
| Connected | Wi-Fi LED is lit |
What should I do if the BROTHER DCP-T220 indicates “No paper loaded”?
Load paper in the tray, and then press Inicio Negro (Black Start) or Inicio Color (Color Start).
What should I do if the BROTHER DCP-T220 indicates “Tray not detected”?
Slowly push the paper tray completely into the machine.
What should I do if the BROTHER DCP-T220 indicates “Out of memory”?
For solutions, see the Online User’s Guide.
What should I do if the BROTHER DCP-T220 indicates a “Machine error”?
For solutions, see the Online User’s Guide.
What should I do if the BROTHER DCP-T220 indicates “Wrong paper size”?
For solutions, see the Online User’s Guide.
How do I make a copy on my BROTHER DCP-T220?
1. Load the paper in the paper tray.
2. Place the document in the lower right corner of the scanner glass.
3. Press Inicio Negro (Black Start) or Inicio Color (Color Start).
How do I make multiple copies on my BROTHER DCP-T220?
In step 3 of the single copy instructions, press Inicio Negro (Black Start) or Inicio Color (Color Start) once for each additional copy.
How do I make a best quality copy on my BROTHER DCP-T220?
In step 3 of the single copy instructions, press and hold Inicio Negro (Black Start) or Inicio Color (Color Start) for two seconds.
How do I make other copies on my BROTHER DCP-T220?
Use the Brother iPrint&Scan application on a computer or mobile device.
How does the 2 in 1 ID Copy function work on the BROTHER DCP-T220?
After scanning, the BROTHER DCP-T220 blinks slowly. You can set one specific copy function for the Atajo copia (Copy Shortcut) button. The default is 2 in 1 ID Copy.
How do I check the ink volume on my BROTHER DCP-T220?
DO NOT fill the ink tank past the maximum fill mark. When the ink level reaches the lower line, refill the ink tank as soon as possible.
How do I improve print quality on my BROTHER DCP-T220 by cleaning the print head?
1. Press the Stop button and the Atajo copia (Copy Shortcut) button simultaneously.
2. To clean all colors, press the Color button. To clean black only, press the Black button.
After cleaning, the BROTHER DCP-T220 machine prints the Print Quality Check Sheet.
What should I do if print quality does not improve with normal cleaning on my BROTHER DCP-T220?
If the print quality does not improve with normal cleaning, try the Special cleaning (Note that this operation will consume a large amount of ink).
1. Make sure all ink tanks are at least half-full.
2. Use the procedure for normal cleaning, but hold Inicio Negro (Black Start) and Inicio Color (Color Start) simultaneously for five seconds while the Ink LED is blinking.
How do I remove jammed paper from my BROTHER DCP-T220?
Carefully pull out the jammed paper. Avoid getting ink on your hands.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD BROTHER DCP-T220 (01) PDF DOCUMENT