BRAUN HF5050I (01) PDF MANUAL

1. Plug in the appliance. It will beep once and the display will show “–:–“.

2. Press the power button to turn on the appliance. The display will show the default time and temperature (e.g., 220°C).

3. To select a cooking mode (Air Fry, Grill (HF5073 only), or Fast Oven), press the corresponding button. The default settings for that mode will be displayed.

4. If a pre-heat function is desired, the appliance may display “5 min” to indicate the pre-heating duration.

Once the appliance is turned on, you can select a cooking mode by pressing the dedicated button for ‘Air Fry’, ‘Grill’ (on HF5073 models), or ‘Fast Oven’. Each mode has a set of pre-defined food categories represented by icons that can be cooked in that mode.

1. Insert the grill plate into the basket.

2. Press the ‘Grill’ button to select the grilling mode. The display will show ‘PrE’ (Pre-heat), then the default temperature (e.g., 220°C) and time (e.g., 07 min).

3. Press the Play/Pause button to start pre-heating. The appliance will pre-heat for approximately 10 minutes, then beep and display ‘Add’.

4. Open the basket, add your food, and close the basket. The cooking will resume automatically.

5. To pause cooking, press the Play/Pause button. To end cooking, press and hold the Play/Pause button until ‘End’ is displayed.

6. To turn on the internal light, press the light bulb icon. Press it again to turn it off.

1. To adjust the time, press the time icon. The minute digits will flash (e.g., 40 min). Use the arrows to increase or decrease the time (e.g., 39, 40, 41 min).

2. To adjust the temperature, press the temperature icon. The degrees Celsius digits will flash (e.g., 180°C). Use the arrows to increase or decrease the temperature (e.g., 175, 180, 185 °C).

1. Prepare the food (e.g., cut potatoes into fries, rinse them, and dry thoroughly).

2. Add a small amount of oil (e.g., 1x oil) and mix well to coat the food evenly.

3. Place the prepared food (e.g., up to 1000g of fries) into the basket.

4. Select ‘Air Fry’ mode and set the desired time and temperature (or use a preset).

5. Press the Play/Pause button to start cooking.

6. The appliance may signal a ‘shake’ reminder during cooking (e.g., after 10 minutes). Open the basket and shake the contents thoroughly, then close the basket to resume cooking.

7. When cooking is complete, the appliance will signal and display “00” flashing, then ‘End’.

1. After selecting a cooking mode (Air Fry, Grill, or Fast Oven), press the ‘M’ button. This will cycle through the preset programs for the selected mode.

2. Each press of the ‘M’ button will display a different preset with its recommended time and temperature.

3. For example, in Air Fry mode, presets might include settings for fries (15 min, 180°C).

4. In Grill mode (HF5073), presets might include settings for meat (12 min, 200°C).

5. In Fast Oven mode, presets might include settings for baking (25 min, 190°C).

6. Once you have selected the desired preset, press the Play/Pause button to start cooking.

7. When cooking is complete, the appliance will signal and display “00” flashing, then ‘End’.

If an error occurs, the appliance may display an error code such as E1, E2, or E3, which will be flashing. If you encounter an error code, it is recommended to unplug the appliance for 15 minutes, then plug it back in. If the error persists, there may be a technical issue.

1. Before cleaning, ensure the appliance is unplugged and has cooled down for at least 30 minutes.

2. The basket and grill plate can be washed by hand with warm, soapy water or placed in a dishwasher.

3. The interior of the appliance can be cleaned with a damp cloth. Do not use abrasive cleaners or harsh chemicals.

4. The exterior of the appliance can be wiped with a soft, damp cloth.

5. Do not immerse the main unit of the appliance in water or any other liquid.

6. Ensure all parts are completely dry before reassembling and storing the appliance.

Potatoes

Vegetables

Meat

Fish

Pizza, Snacks, Baked Goods