BOUNDLESS TECHNOLOGY CFV (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD BOUNDLESS TECHNOLOGY CFV (01) PDF MANUAL


PDF Content Summary: Need Help? 866.355.7061 Info@bndlsvapes.com @bndlsvapes /bndlsvapes #bndlsvapes 1955 USER MANUAL 1801 S. Excise Suite 112 Ontario California 91761 User Guide Index Section 1: CFV Key Features Section 2: CFV Product Functions Section 3: Temperature Controls Section 4: Inverted Display Function Section 5: Display Information Section 6: Battery Indicators Section 7: Interchangeable Rings Section 8: How to Change the Rings Section 9: CFV Loading&Unloading Section 10: How to Remove &Load The Mouthpiece Section 11: How to Dis-assemble the Mouthpiece Section 1 - Key Features Section 2 - Functions Heat Retention Ring: Interchange able rings (wood & quartz) Battery Specifications: Dual 18350 2S-7.4V 15A rating, maximum 20A Functional Keys: Power Button: Located above the OLED screen. Used to power on and off the device. "+" & "-": Both buttons are located below the OLED screen and are used to increase and decrease the temperature, as well as change the temp modes from Celsius to Fahrenheit or from Fahrenheit to Celsius. Charging Terminal: USB MICRO-5PIN Convection Heating Base: Ceramic heating core +NTC Wrapping, two output heaters with independent monitoring Resistance after ceramic heating core is connected in parallel: 0.35-0.600 Powering On & Off: Rapidly press the power button 5 times within 2 seconds to turn on/off the CFV. The CFV will display the Boundless Technology logo as an indication of being powered on. After 3 seconds, the CFV will display the main interface and begin heating. During the heating process, you can press the main control key for 2 seconds to stop/restart the heating. Memory Function: The CFV will power on and reach the temp set during the previous time of use. Display screen: OLED 0.86-inch Section 3 - Temperature Controls Section 4 - Inverted Display Function Display mode: 0.86-inch OLED screen with optional inversion function. "+" Key: Press this key consecutively to increase the temperature by 1°F/1°C at a time. Temperature range is 140°F-446°F (60-230°C) "-" key: Press this key consecutively to decrease the temperature by 1°F /1°C. Press and hold the"+" or "-" to increase/ decrease the temp automatically. LAS 350 F Power Button www . -OSSO Press "+" and "-" at the same time and release immediately to switch the units from Celsius to Fahren heit or from Fahrenheit to Celsius. 4_" +" Power Button Inverted Interface Display Function: When the device is off, press the Power Button,"+" and "-"keys (3 keys) at the same time for 2 seconds to invert the display screen by “180°". Then press the main control key 5 times to turn on the device to enter the inverted interface display. Note: If you want to go back to the non-invert ed interface, then you need to invert the interface again by powering off the device and pressing the main control key, “+” and “-” keys (3 keys) at the same time for 2 seconds. Section 5 - Display: Section 6 - Battery Indicator: Once the CFV is turned on, it will display the Boundless logo and enter the main interface to start the heating process Charging when the CFV is on: Once the CFV is connected to the supplied charger, the battery indicator icon will flash in sequence. The battery is fully charged if the grid is full. If there is no operation for 30 seconds, the CFV will enter standby mode. Charging when the device is off: If the CFV is off and connected to the USB charger, a large battery icon will be displayed. You can press any key to turn on the CFV and go back to the operating status. (During Standy Mode need to press and hold the power button for 2 seconds to restart the heating.) Heating Prompt: When the CFV reaches the set temperature, the screen will display the heat wave icon. (Now you can begin to Draw from the Mouthpiece) Section 7 - Interchange able Rings: Section 8 - How to Change the Rings: The CFV comes with 2 Heat Retention rings. Designed to reflect the heat drawn from the convection airflow system. 10 Heat Retention Rings: Wood - Our custom wood retention rings are the perfect choice for those looking for the highest level of convec tion. Apply chamber removable tool to device. Rotate the tool counter clockwise to take out the accessories. Quartz -The Quartz retention ring was designed with the intention of adding a level of conduction based heat by absorbing the convection heat and dispersing the heat throughout the chamber. Change to the desired rings Then re-assemble the accessories. Section 9 - CFV Loading & Unloading Section 10 - How to Remove & Load The Mouthpiece Rotate the mouhtpiece assembly counter-clockwise to unlock it Apply Loader Lid Take out the Mouthpiece Components from the device. How to Load the Mouthpiece Components:The reseve of above steps. Easily load Chamber 90° Unloading Chamber Warranty/Returns Section 11 - How to Dis-assemble the Mouthpiece Push Down the slip(as Arrow showed) Boundless Technology, LLC Warrants this device againts defects in materials and workmanship under normal use for a period of 3 years from the date of retail purchase by the original end-user, the original bil of sale is required to redeem a warranty. The limited warranty covers 3 years for electronics, structural integrity and attachments. 1 Year warranty for 18350 Batteries If a physical defect arises and a claim is made within the warranty period, at its option and to the extent permitted by law, Boundless Technology will Either: - Repair the Product Defect Take out the Mouthpiece Base Bottom Parts - Exchange the Product with a product warranty that is New or Functionally Equivalent Device or - Refund the purchase price of the device. Dis-assemble the mouthpiece * 866.355.7061 SALES@BNDLSVAPES.COM 1801 S. EXCISE AVE SUITE 112 ONTARIO CA. 91761


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply