BOSS BR-8 (01) PDF MANUAL

Unfortunately, it may be impossible to restore the contents of data that was stored on the Zip disk once it has been lost. BOSS Corporation assumes no liability concerning such loss of data.

Do not use this software for purposes that could infringe on a copyright held by a third party. BOSS Corporation assumes no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this software.

Unauthorized recording, distribution, sale, lending, public performance, broadcasting, or the like, in whole or in part, of a work (musical composition, video, broadcast, public performance, or the like) whose copyright is held by a third party is prohibited by law.

Only audio data is converted; mixer and effect parameters are not converted. We recommend that you make a backup as a precaution against unexpected destruction of files by the system or driver.

Only Zip disks formatted on the BR-8 can be used. If a Zip disk has been used by some other system such as Windows, you must first initialize it on the BR-8.

Zip drive (SCSI/USB/ATAPI)

CPU 80486 or better (Pentium recommended)

Microsoft Windows 95/98/Me

Microsoft Windows XP Home/ XP Professional/ 2000 Professional/ NT are not supported.

(1) Turn off the power of your computer, and connect a Zip drive.

(2) Restart your computer.

For details on connecting your Zip drive and computer, refer to the manual for your Zip drive or to the manual for your computer.

Copy the file named “br8wav.exe” to your hard disk.

In uninstalling, delete the file “br8wav.exe”.

For details on copying, refer to the Windows manual or help function.

Double-click the br8wav.exe icon. The application will start up.

Click either the [X] button located in the upper right of the window, or the [Exit] button located in the lower right of the window. The application will exit. [ESC] key on your keyboard is also usable.

If a Zip drive is not selected in [BR-8 Media Drive: ], select a drive from the popup menu.

If a BR-8 formatted disk is inserted in the selected drive, the song numbers on the disk will be displayed in the window.

If a BR-8 formatted disk is not inserted in the selected drive, nothing will be displayed in the song name display area.

Select a song from the [Song: ] popup menu.

The contents of the selected song will be displayed in the track select area of the window.

(1) Click the track that you wish to convert into Windows Wave Audio (subsequently referred to as WAV) format.

Clicking a track will cause the color to change as follows.

Track containing audio data : green -> orange

Track not containing audio data: gray -> red

The [BR-8 Track-> Wave File] button will become active.

(2) Press the [BR-8 Track-> Wave File] button. A dialog box will appear.

(3) Select the save location for the file.

(4) In [Filename], specify the filename for saving.

(5) Click [Save], and the file will be saved.

If you decide to abort the conversion, click [Cancel].

If you select two tracks, a stereo .WAV file will be saved. (The smaller track number will be saved on the Lch.)

If you select one track, a monaural .WAV file will be saved.

(1) Click the track on which you wish to store a WAV format file.

Clicking a track will cause the color to change as follows.

Track containing audio data : green -> orange

Track not containing audio data: gray -> red

The [Wave File-> BR-8 Track] button will become active.

You can select a track in which data has already been recorded. (The saved data will overwrite the previous data, erasing it.)

(2) Press the [Wave File-> BR-8 Track] button. A dialog box will appear.

(3) Select the name of the file that you wish to load.

(4) Press the “Open” button. The file will be converted into BR-8 format, and will be stored in the specified track.

If you decide to abort the conversion, click [Cancel].

The time required for loading and conversion will depend on the size of the original file.

If you specify two tracks when loading a monaural WAV file, the same data will be placed in each of the specified tracks.

If you specify one track when loading a stereo WAV file, the Lch data will be placed in the specified track.

The first six characters of the WAV filename (the first eight characters for monaural) will automatically be registered as the track name.

You can use this software to input/ or edit the track name of each track.

(1) Click the right button on the track whose track name you wish to input or edit.

(2) An input window will appear. Input the desired track name.

Up to eight characters can be input. Do not input symbols that cannot be displayed on a BR-8.

Click the [BR] logo in the title bar.

Click [About BR-8 WAVE CONVERTER].

You selected a Zip disk that was not formatted for the BR-8. Check the Zip disk and try the operation once again.

You attempted to read a protected disk. Or, you performed a read operation on a disk that was not ready. Check the Zip disk and try the operation once again.

You attempted to write to a protected disk. Or, you performed a write operation on a disk that was not ready. Check the Zip disk and try the operation once again.

You attempted to write to a protected song. Turn off song protection on the BR-8 itself, and try the conversion operation once again.

The file you attempted to read was not a PCM format file (PCM, 44.1kHz, 16Bit), and therefore could not be read. Please select a PCM format file to read.

There is insufficient space on the save destination Zip disk. Increase the amount of free space by erasing unneeded data. Then try the conversion operation once again.

In the ” Wave File-> BR-8 Track ” conversion, you selected wave data with a sampling rate of something other than 44.1 kHz. Please load a PCM format file with a sampling rate of 44.1 kHz.

In the ” Wave File-> BR-8 Track” conversion, you attempted to convert wave data that was shorter than one second. The BR-8 cannot handle data with a playback time shorter than one second.

In the ” Wave File-> BR-8 Track ” conversion, the space for playback data is full, and no new playback data can be added. Use the “SONG OPTIMIZE” operation on the BR-8 to erase unneeded data, and then try the conversion operation once again.

In inputting the track name, you input characters that cannot be displayed on the BR-8. Correct the characters.