FREE ENGLISH BOSCH DWS97BA621 (01) PDF USER GUIDE
FREE ENGLISH BOSCH DWS97BA621 (01) PDF USER MANUAL
FREE ENGLISH BOSCH DWS97BA621 (01) PDF OWNER GUIDE
FREE ENGLISH BOSCH DWS97BA621 (01) PDF OWNER MANUAL
FREE ENGLISH BOSCH DWS97BA621 (01) PDF REFERENCE GUIDE
FREE ENGLISH BOSCH DWS97BA621 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BOSCH DWS97BA621 (01) PDF REFERENCE MANUAL
FREE ENGLISH BOSCH DWS97BA621 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BOSCH DWS97BA621 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BOSCH DWS97BA621 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to prevent carbon monoxide intoxication?
The room must be well ventilated when the hood is used in conjunction with a stove burning gas or other fuel. This is because the gas cooker at work requires a lot of air to help burn, so please open the door and window to keep air ventilation to avoid suffocation.
How to prevent burns?
Do not touch the lamp shade that has been turned on or off for a long time.
How to prevent fire?
Prohibit the fire directly bake the hood.
Do not barbecue under the range hood.
DO NOT leave the kitchen when cooking fried and other oil consumption of more food, to avoid causing fire due to dry fried oil for a long time.
The air deflector can only be opened when the hood is cleaned manually. Do not open the air deflector of hood during the whole working process, to avoid the danger.
Regularly clean the cavity, air deflector and oil cups. Due to excessive oil accumulation will have fire hazards, three meals a day cooking case recommended weekly cleaning.
What to check before first use?
Make sure the filter frame and oil collector of the cooker hood are already correctly installed.
Who can use this appliance and how to handle the power cord?
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
DO NOT drag the wire to remove the electric plug.
NEVER insert or remove an electric plug with wet hands.
What to do if the cooker hood is put aside for a long time?
If the cooker hood is put aside for a long time, please remove the electric plug.
How to dispose of old cooking appliances?
Discard the used cooker hood which cannot be used any longer. Remove the power line plug and cut off the power line.
The used cooker hood contains recyclable materials. Dispose or recycle the returnable materials correctly to protect our environment.
What to check before using the new appliance?
This unit is approved for use with domestic appliances for general domestic kitchen ventilating use only. DO NOT use the unit for other purposes.
Discharging type of this cooker hood is external discharge.
If there is any obvious damage to the cooker hood, DO NOT connect the cooker hood to the power supply.
Please call up service hot line or dealer.
What do the control panel symbols mean?
| Symbol | Description |
|---|---|
| ① | Fan on/off |
| C | Key Lock |
| 1 2 3 | Fan Speed |
| ∞ | Self-cleaning mode |
| ※ | Light |
The lamp is controlled individually and is not affected by any other buttons.
How to turn on/off the fan?
Press the button ①, after a few seconds, the fan runs at the speed 3, the display as blew.
Press the button ① again, fan will be off.
How to use the key lock function?
When the fan does not work, press and hold the button C for 3 seconds to enter the key lock state, the indicator light above the button is on.
Cancel the key lock by pressing again the button C for 3 seconds, the indicator light above the button is off.
How to control the fan speed?
When the fan is working, press the numbers 1, 2, 3, and the fans work at 1, 2 and 3 respectively, and the indicator light above the number is bright.
How to use the self clean function?
After a period of use, the indicator light above the button ∞ will blink to remind user that it’s time to activate self clean mode. Dissolve by electric heating, and melt the internal grease uniformly at high temperature.
In that case, the other functions must be stopped (except for lamp) and then activate self clean by pressing the button ∞.
The self clean mode is activated, and the indicator light above the button ∞ is on.
The cycle for self clean mode is 30 minutes. When cycle time is expired, self clean mode will be deactivated automatically.
What to do before using the self clean function?
Before the self clean, please empty your oil collector to prevent oil from overflowing and remove the visible, sticky oil/grease from the hood. When the self clean is running, do not leave your cooker hood alone to avoid accidents.
How to control the lamp?
Press the button ※, the lamp is bright. Then press the button again, the lamp is off.
What matters need attention when caring and cleaning the cooker hood?
Pull off the electric plug before caring and cleaning the cooker hood.
Wear protection gloves when cleaning or maintaining the cooker hood, to prevent your fingers being hurt in cleaning.
DO NOT flush the cooker hood directly with water.
The cooker hood should be cleaned regularly depending on the use frequency and surrounding environment to keep a good exhausting effect and have a longer service life.
How to avoid fire risk during cleaning?
There is a fire risk if cleaning is not carried out in accordance with the instructions.
How to clean the air deflector?
Clean the air deflector every week with a soft cloth to wipe the external surface. The air deflector can also be opened, and the inner side of the air deflector and the outer surface of the oil net should be cleaned regularly.
What is the operation method for opening and closing the air deflector?
Cooking just finished, the temperature of the lower part of the air deflector which close to the hearth will be relatively high, do not touch at this time, waiting for the temperature down then start cleaning, to avoid burns!
Operation method: hands grabbed the air deflector on both sides, a little hard to pull back and body, the air deflector with pneumatic rod will open to the maximum position automatically.
After cleaning, the upper hand slightly downward pressure, until the air deflector and cavity closes automatically.
How to clean the outer shell and inner cavity?
Please use a soft wet cloth instead of anything hard or steel wire ball.
Use neutral abradant-free detergent to clean the surface.
Please use special cleaner to clean glass surface.
DO NOT use grinding sponge, sand cleaner, soda, acid, and chloride, etc. to clean the stainless steel surface.
DO NOT use any tool (e.g. steel wire ball) that may easily damage the surface to wipe the cooker hood.
DO NOT apply strong detergent such as toilet cleanser to the cooker hood.
How to clean the oil collector?
When the oil takes up two thirds of the oil collector, the cup should be cleaned in time in case that the oil spills over. Detach the cup according to the figure.
How to troubleshoot common cooker hood issues?
| Abnormal Phenomenon | Possible Explanations | Troubleshooting |
|---|---|---|
| Cooker hood does not work | External electromagnetic interference; Public flue wind pressure, fumes flooded | Unplug the power plug, wait 1 minute after the plug and try again. If the fault persists, please call the Service Hot-line. |
| Motor does not work and lamp cannot be turned on | The plug is not or improperly inserted or no power supply | Make sure plug is inserted properly; ask an electrician to repair |
| Motor works and lamp cannot be turned on | Lamp is damaged | Contact service to replace the lamp |
| Suction force is not strong | Not the maximum fan speed; Air convection is strong | Turn on the fan speed to maximum; Close the window at one side; |
| The indicator lights of button1 and ∞ blinks, alarm beeps; Or the indicator lights of button 2 and ∞ blinks, alarm beeps. | Self-clean is failure | Unplug the power plug, wait 1 minute after the plug and try again. If the fault persists, please call the Service Hot-line. |
What are some important tips for maintenance and service?
Only the specially trained and qualified installation personnel are allowed to repair the cooker hood. Anyone other than such personnel must not disassemble the machine for repair without authority in case serious consequences are incurred!
Tempered glass on the products has strict quality control, but there is a minimal probability blew phenomenon because of the production process and its characteristics.
When cleaning things around the cooker hood (such as ceiling, cabinet) which maybe touch the hoods, please wear protection glove or take other protection methods to prevent being injured.
What are the safety precautions for installation?
Only the specially trained and qualified installation personnel are allowed to install and commission the cooker hood. Anyone other than such personnel must not disassemble the machine for repair without authority in case serious consequences are incurred.
If the power line of your cooker hood is damaged, please contact service to change it.
If your kitchen is under decoration, please DO NOT expose the cooker hood outside.
When moving and installing hood, don’t take glass parts, avoiding break and loose.
The wall must have sufficient strength to bear the weight of the cooker hood and an even surface. Thus, the cooker hood can be installed steadily without shaking.
The wall which install the cooker hood must be non-combustible.
DO NOT install the cooker hood above a cooker using solid fuel.
DO NOT let the cooker hood and other gas equipment (e.g. gas water heater) share the same chimney duct.
Make sure the power supply system (current, voltage and connecting wires) in your house can bear the normal load of the cooker hood.
Take care of the wires embedded in the wall when drilling holes in the wall to avoid the risk of electric shock.
The cooker hood must be grounded. A three pin plug is provided, and this plug must be inserted in a truly grounded receptacle. In case of current leakage, a current loop is formed by the grounding to avoid an electric shock.
Where should the cooker hood be installed and at what height?
Install the cooker hood in a dry place and avoid direct sunlight.
Ambient temperature of cooker hood less than 40 °C.
The cooker hood must be installed right above the gas stove and in the same centerline of the gas stove.
The distance of stove cooking appliances supporting surface and the lowest part of the range hood should at least 650mm. Such as the gas stove installation instructions specify a larger installation distance, which should be considered.
What are the cautions regarding the exhaust pipe installation?
If the exhaust pipe to the public flue, recommended installation diameter not less than 160mm of the check valve can effectively prevent the smoke and odour, and ensure that the smoke exhaust effect. Do not put the exhaust pipe into the public flue too deep, in order to avoid smoke resistance increases.
If the exhaust pipe is directly connected to the wall, make sure the exhaust pipe extends out of the outer wall of 30mm.
A smoke straight, short tube can make the exhaust hood more smoothly.
How to install the oil collector?
Install the oil collector under the filter frame.
How to perform a test run after installation?
After installation, test run according to the operation instruction, then clean and maintain the surface of the cooker hood.
How to install the pipe socket?
Fix the pipe socket onto the blower system with 4 pieces of screw M4x20.
How to fix the cooker hood?
Hang the cooker hood on the mounting rail on the wall to make sure the cooker hood does not shake or hook off. Keep the cooker hood horizontal.
Install the accessory fixing screws in the hole position on step 4 in installation leaflet to prevent the cooker hood hooking off from the mounting arm.
How to connect the exhaust duct?
Please fix the exhaust duct to the pipe socket of the cooker hood by a bolt of ST3x14, wrapped with aluminum foil tape sealing.
What are the recommendations for exhaust pipe installation?
Try to avoid the use of long exhaust pipe, as far as possible to reduce the number of exhaust pipe bending angle, which will affect the smoke exhaust effect.
What exhaust pipe installation manners should be avoided?
The exhaust pipe can not be installed in the following manner, so as not to affect the exhaust effect:
A pipe with too many sharp bends.
A pipe with sections that angle upwards and then downwards.
A pipe with a section that goes downwards.
A pipe that sharply narrows.
What are the requirements for the wall hole diameter, ceiling space, and manhole?
The hole is too small will affect the exhaust effect, on the premise of ensuring safety, recommended wall hole diameter 180mm.
Ceiling space to facilitate the pipe installation, and there can be no obstacle affecting the smoke tube arrangement, not less than 300mm.
Manhole is to exhaust system failure can facilitate the maintenance and design, so be placed in check valve near. In order to facilitate the operation of maintenance personnel, as far as the size of 400mm*400mm, avoid any obstructions above. In order to ensure the use of manhole, manhole please avoid cabinets.
CLICK HERE TO DOWNLOAD BOSCH DWS97BA621 (01) PDF MANUAL
