Free English BOLIN ES-WM (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD BOLIN ES-WM (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the box with the BOLIN ES-WM Outdoor Wall Mount?
The following items are included with your BOLIN ES-WM Outdoor Wall Mount:
| Outdoor Wall Mount ES-WM | x1 |
| Mounting Support Bracket | x1 |
| Positioning Template | x1 |
| Screw (1/4-20UNC) | x4 |
| Safety Cable | x1 |
What are the dimensions of the BOLIN ES-WM Outdoor Wall Mount?
All measurements for the BOLIN ES-WM are specified in millimeters (mm).
Overall Dimensions:
Length: 442.54 mm
Height: 212.22 mm
Top View:
Camera mounting plate diameter: ø167 mm
Bottom View:
Length: 440.04 mm
Width: 161.76 mm
Arm length: 267.32 mm
Notch depth: 16.94 mm
Mounting Support Bracket Dimensions:
Width (front): 204.6 mm
Height: 188.48 mm
Length (side): 116.00 mm
Width (side): 100.00 mm
Vertical hole spacing: 40.00 mm
Mounting hole diameter: ø8.5 mm
Base thickness: 8.5 mm
In what orientations can a camera be installed on the BOLIN ES-WM?
For EX-Ultra Series Cameras, the BOLIN ES-WM supports two installation orientations:
1. Upright Position
2. Upside Down Position
How do I install the BOLIN ES-WM Outdoor Wall Mount?
Please follow this step-by-step guide to install the BOLIN ES-WM Outdoor Wall Mount:
Step 1: Position the template on the wall where the installation is required. Use a power drill to create holes precisely at the marked locations (Hole Diameter ø12 and ø6 as indicated on the template).
Step 2: Align the mounting support bracket with the drilled holes. Insert the screws through the holes in the bracket and into the drilled holes on the wall. Tighten the screws until the bracket is securely attached to the wall.
Step 3: First, connect the Mounting Support Bracket and the ES-WM main body with the included Safety Cable. Next, thread the camera’s cables through the ES-WM’s bottom hole. Align the screws on the ES-WM with the holes on the Mounting Support Bracket and apply downward pressure to hang the ES-WM on the bracket.
Step 4: Fasten the bracket in place using nuts to secure the ES-WM main body to the mounting support bracket.
Step 5: Secure the camera to the mounting plate by tightening the four included 1/4-20UNC screws into its bottom.
Step 6: Fasten the camera to the ES-WM mount utilizing the Safety Cable.
Step 7: Align the camera by matching the triangle symbol on the camera base with the EX./EXU Series Sign on the ES-WM mount.
Step 8: Tighten the screw to lock the camera into position on the mount.
Step 9: Thread the cables through the waterproof case.
Step 10: Plug the cables into the camera’s corresponding ports.
Step 11: Attach the waterproof case over the cable connections and secure it by tightening the four screws.
Step 12: Align the outer cover’s holes with the mounting points on the ES-WM.
Step 13: Secure the cover by tightening the M3 x 4 screws.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD BOLIN ES-WM (01) PDF DOCUMENT