Free English BLACK+DECKER BPWM16W (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD BLACK+DECKER BPWM16W (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do if the BLACK+DECKER BPWM16W appliance is flooded?
If the BLACK+DECKER BPWM16W appliance is flooded, cut the power immediately and contact your nearest service center.
What should I do if the BLACK+DECKER BPWM16W emits a strange noise, a burning smell, or smoke?
If the BLACK+DECKER BPWM16W appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest service center. Failing to do so may result in electric shock or fire.
What should I do in the event of a gas leak, such as propane gas, LP gas, etc., when using the BLACK+DECKER BPWM16W?
In the event of a gas leak (such as propane gas, LP gas, etc.) when using the BLACK+DECKER BPWM16W, ventilate the area immediately. Do not turn any appliance or light on or off. Do not use a ventilating fan, as a spark may result in an explosion or fire.
What types of items should not be washed in the BLACK+DECKER BPWM16W?
Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances in the BLACK+DECKER BPWM16W as they give off vapors that could ignite or explode.
Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water in the BLACK+DECKER BPWM16W. These substances give off vapors that could ignite or explode.
Do not place items exposed to cooking oil in the BLACK+DECKER BPWM16W. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
Do not wash laundry contaminated by gasoline, kerosene, benzene, paint thinner, alcohol, dry cleaning detergent or other flammable or explosive substances in the BLACK+DECKER BPWM16W. This may result in electric shock, fire, or an explosion.
Do not wash, spin, or dry water-proof seats, mats, or clothing in the BLACK+DECKER BPWM16W. Do not wash thick, hard mats even if the washer mark is on the care label. This may result in injury or damage to the washer, walls, floor, or clothing due to abnormal vibrations.
Do not wash any non-laundry objects, such as shoes, food waste, or animals into the BLACK+DECKER BPWM16W. This can cause abnormal vibrations that can damage the washer, and, in the case of pets, cause severe injury or death.
Do not wash laundry contaminated by oils, creams, or lotions usually found in skincare shops or massage clinics in the BLACK+DECKER BPWM16W. This may result in the rubber seal becoming deformed and water leakage.
Do not wash water-resistant or water repellant-type clothing in the BLACK+DECKER BPWM16W.
Do not wash throw rugs or doormats in the BLACK+DECKER BPWM16W. If you wash throw rugs or doormats, the sand will accumulate inside the washer, which may result in an error such as no draining.
How do I operate the Control Lock feature on the BLACK+DECKER BPWM16W?
To activate the Control Lock function on the BLACK+DECKER BPWM16W after starting the washer, press and hold the Temp and Program buttons at the same time. The control lock indicator light will turn on. To cancel this function, select the Temp and Program buttons again.
When Control Lock is activated on the BLACK+DECKER BPWM16W, the indicator light will turn on. The control panel buttons will not function except for POWER and the ability to deactivate Control Lock by pressing and holding the TEMP and PROGRAM buttons again.
How should the water supply hoses be connected for a permanent connection on the BLACK+DECKER BPWM16W?
Connect the ends of the water supply hoses to the HOT and COLD faucets on the BLACK+DECKER BPWM16W. For convenience, use the Quick Connection Adapter for connection to the cold water faucet (refer to step 3 on the previous page for instructions). Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a wrench/pliers.
The water supply hose connected to the HOT faucet must be connected to the HOT water supply inlet and the water hose connected to the COLD water source must be connected to the COLD water supply inlet on the BLACK+DECKER BPWM16W.
Tighten the fitting by hand until it is snug, and then tighten them an additional two-thirds of a turn with a wrench/pliers.
Confirm that the water supply hoses are not twisted or bent on the BLACK+DECKER BPWM16W. If the hoses are twisted or bent, the hoses can leak and cause electric shock due to the water leakage. To ensure the correct water usage, connect both the HOT and COLD water faucets. If they are not both connected an error can occur.
If you do not want to use the HOT water supply hose on the BLACK+DECKER BPWM16W, install the water inlet cap into the HOT water supply inlet hole. In this case, you must select cold water as the wash temperature choice.
Turn on the HOT and COLD water supplies and check all the water supply inlet connections and the faucets for water leaks.
What is the recommended procedure for cleaning the tub of the BLACK+DECKER BPWM16W?
Run a Rapid cycle with some bleach every month to clean the tub of the BLACK+DECKER BPWM16W. This will also help to remove mold which may occur inside the washer.
How often should the lint filter in the BLACK+DECKER BPWM16W be cleaned?
It is suggested to clean the lint filter in the BLACK+DECKER BPWM16W every 10 cycles. Take it out and clean the filter with water. Then place it back into the washer.
How often should the pump filter in the BLACK+DECKER BPWM16W be cleaned?
It is suggested to clean the lint filter every once every month and the pump filter every once every month on the BLACK+DECKER BPWM16W. Remove the filter by turning it to the left. Rinse it with water and re-insert it by turning it to the right.
What is the recommended procedure for troubleshooting a thumping sound on the BLACK+DECKER BPWM16W?
Heavy wash loads may produce a thumping sound in the BLACK+DECKER BPWM16W. If the sound continues, the washer is probably out of balance. Stop and redistribute the wash load. Pause the cycle and redistribute the load.
What are the possible causes and solutions for vibrating noise from the BLACK+DECKER BPWM16W?
Possible causes and solutions for vibrating noise from the BLACK+DECKER BPWM16W are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| Vibrating noise | Packaging materials were not removed. | See the UNPACKING AND REMOVING SHIPPING MATERIAL section in the installation instructions. |
| Wash load may be unevenly distributed in the tub. Not all leveling feet are resting firmly and evenly on the floor. | Pause the cycle and redistribute the load. See Leveling the Washer in the Installation Instructions. | |
| Floor not rigid enough. | Make sure that the floor is solid and does not flex. See Flooring in the Installation Requirements. |
What should be done if the BLACK+DECKER BPWM16W has excessive sudsing?
If the BLACK+DECKER BPWM16W has excessive sudsing due to too much or incorrect detergent, remember that HE detergents are formulated specifically for High-Efficiency washers and contain suds reducing agents. Only use detergent with the High-Efficiency (HE) logo.
What are the possible causes and solutions for water leaking from the BLACK+DECKER BPWM16W?
Possible causes and solutions for water leaking from the BLACK+DECKER BPWM16W are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| Water leaking | Inlet hose connection is loose at faucet or washer. | Check hoses for leaks, cracks and splits. Check and tighten hose connections. |
| House drain pipes are clogged. | The washer pumps out water very rapidly. Check for water backing up out of the drain pipe during drain. If water is seen coming out of the drain, check for proper drain hose installation and check for restrictions in the drain. Contact a plumber to repair drain pipe. | |
| Drain hose has come out of drain or is not inserted far enough. | Tie drain hose to inlet hose or standpipe to prevent it from coming out during drain. For smaller drain pipes, insert the drain hose into the pipe as far as the drain hose flange. For larger drain pipes, insert the drain hose into the pipe 1-2 in. past the flange. | |
| A large item such as a pillow or blanket is above the top of the tub. | Stop the washer and check the load. Make sure the load does not crest above the top edge of the tub. |
What are the possible causes and solutions for rattling and clanking noise in the BLACK+DECKER BPWM16W?
If there is rattling and clanking noise in the BLACK+DECKER BPWM16W, the possible cause is foreign objects, such as keys, coins, or safety pins, may be in the tub or pump. Stop the washer, check the tub and drain filter for foreign objects. If noise continues after the washer is restarted, call for service.
What are the possible causes and solutions for wrinkling when using the BLACK+DECKER BPWM16W?
Possible causes and solutions for wrinkling when using the BLACK+DECKER BPWM16W are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| Wrinkling | Washer not unloaded promptly. | Always remove items from the washer as soon as the cycle is complete. |
| Washer overloaded. | The washer can be fully loaded, but the tub should not be tightly packed with items. The lid of the washer should close easily. | |
| Hot and cold water inlet hoses are reversed. | Hot water rinse can set wrinkles in garments. Check the inlet hose connections. |
What are the possible causes and solutions for staining on clothes washed in the BLACK+DECKER BPWM16W?
Possible causes and solutions for staining on clothes washed in the BLACK+DECKER BPWM16W are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| Staining | Washer was not unloaded promptly. Clothes were not properly sorted. | Always remove items from the washer as soon as possible after the cycle is complete. Always wash dark colors separately from light colors and whites to prevent discoloration. Never wash heavily soiled items washed with lightly soiled items. |
Why is the wash cycle time on the BLACK+DECKER BPWM16W longer than usual?
The wash cycle time on the BLACK+DECKER BPWM16W may be longer than usual because the washer automatically adjusts the wash time for the amount of laundry, water pressure and other operating conditions. This is normal. The washer adjusts cycle time automatically to provide optimal results for the selected cycle. The time remaining shown in the display is only an estimate. Actual time may vary.
What are the possible causes and solutions for a musty or mildewy odor in the BLACK+DECKER BPWM16W washer?
Possible causes and solutions for a musty or mildewy odor in the BLACK+DECKER BPWM16W washer are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| Musty or mildewy odor in washer | Incorrect or too much detergent has been used. Inside of tub was not cleaned properly. | Use only High-Efficiency (HE) detergent in accordance with the manufacturer’s instructions. Run an Express cycle with bleach once a month to clean tub and remove any mold from inside washer. |
What should I check if the BLACK+DECKER BPWM16W will not turn ON?
If the BLACK+DECKER BPWM16W will not turn ON, check the following:
The power cord is not properly plugged in.
House fuse is blown, circuit breaker has tripped, or power outage has occurred.
House fuse is blown, circuit breaker has tripped, due to multiple appliances on one outlet.
If the washer stopped during a cycle due to a loss of power, the washer will resume the cycle where it stopped when the power is restored.
The solutions are to make sure that the plug is plugged securely into a grounded, 3-prong, 120-VAC, 60-Hz outlet. Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician. Reset circuit breaker or replace fuse. If more than one appliance is connected to the outlet, call an electrician to have an additional circuit installed.
What are the possible causes and solutions for water leaks every load in the BLACK+DECKER BPWM16W?
If there are water leaks every load from the BLACK+DECKER BPWM16W, the possible cause is hoses not installed correctly. Check all fill and drain hose connections to ensure that they are tight and secure.
What is the procedure for running a test cycle on the BLACK+DECKER BPWM16W to check proper installation?
To run a test cycle on the BLACK+DECKER BPWM16W to check proper installation:
Step 1. Press the Power button to turn on your washer.
Step 2. Press the PROCEDURE button repeatedly until the rise and spin cycles are selected and the corresponding indicator lights are illuminated.
Step 3. Press the Start/Pause button to start the test cycle.
Step 4. The washer should not rock or vibrate excessively when water is supplied or when washing or spinning, and should drain well during the spin cycle.
If water leaks while water is being supplied or drained, check the water connections. If the washer rocks and vibrates excessively, level your washer again.
What error code does the BLACK+DECKER BPWM16W display if it takes over 30 minutes to fill water but cannot achieve its preset water level, and what is the solution?
If the BLACK+DECKER BPWM16W displays error code E1, it means it takes over 30 minutes to fill water but cannot achieve its preset water level. Check troubleshooting for washer not filling properly and water leakage.
What error code does the BLACK+DECKER BPWM16W display if it takes over 10 minutes to drain the water but the washer is not completely drained, and what is the solution?
If the BLACK+DECKER BPWM16W displays error code E2, it means it takes over 10 minutes to drain the water but the washer is not completely drained. Check troubleshooting for Washer will not drain water.
What error code does the BLACK+DECKER BPWM16W display if the top lid is open, and what is the solution?
If the BLACK+DECKER BPWM16W displays error code E3, the top lid is open. Close the lid and press the ON/OFF button.
What error code does the BLACK+DECKER BPWM16W display if it runs out of balance three times, and what is the solution?
If the BLACK+DECKER BPWM16W displays error code E4, the washer runs out of balance three times. Redistribute the load.
How do I power on and off the BLACK+DECKER BPWM16W washer?
Press the ON/OFF button once to turn ON the power to the BLACK+DECKER BPWM16W washer. Press again to turn OFF the unit.
How do I start, pause, or continue a wash cycle on the BLACK+DECKER BPWM16W?
Press the Start/Pause button once to start the wash cycle on the BLACK+DECKER BPWM16W. Press again during operation to PAUSE the cycle. Press again to continue the cycle.
How can I select an additional rinse cycle on the BLACK+DECKER BPWM16W?
Press the Extra Rinse button on the BLACK+DECKER BPWM16W to select an additional rinse cycle.
What are the available program options for the BLACK+DECKER BPWM16W washer?
Press the Program button on the BLACK+DECKER BPWM16W to select from the following:
- Normal (steady light)
- Heavy (steady light)
- Delicate (steady light)
- Quick (Flash)
- Bulky (Flash)
- Spin Only (Flash)
How do I select the water temperature for washing on the BLACK+DECKER BPWM16W?
Press the Temperature button on the BLACK+DECKER BPWM16W to select the water temperature for washing: Cold, Warm or Hot temperature selections. The temperature setting is for the wash cycle only; the rinse cycle is cold water.
How is the water level determined for the wash cycle on the BLACK+DECKER BPWM16W?
Press Load Size on the BLACK+DECKER BPWM16W to select Small, Medium or Large. This will determine the water level throughout the wash cycle.
How can I delay the start of a wash cycle on the BLACK+DECKER BPWM16W?
You can delay the start of the wash cycle on the BLACK+DECKER BPWM16W up to 24 hours by activating Delay. Pressing the button adds 1 hour to the start time each time until 24 hours is reached. The digital display will show the amount of hours remaining until the wash cycle is programmed to start. Pressing the delay button to exceed 24 hours will deactivate the delay function and the display will turn off.
To cancel the Delay Start function after it has started on the BLACK+DECKER BPWM16W, power off the unit to reset all functions before restarting the washer.
What does the digital display show on the BLACK+DECKER BPWM16W?
The digital display on the BLACK+DECKER BPWM16W will show and count down the estimated minutes for the wash cycle selected. If delay start is set, the display will indicate the amount of hours until the wash cycle is to begin.
How do I select different wash cycles (Procedure) on the BLACK+DECKER BPWM16W?
Press the Procedure button on the BLACK+DECKER BPWM16W to select different cycles: Soak, Wash, Rinse and Spin. The light will illuminate next to the selected cycles or combination of cycles.
What is the procedure for washing a load of laundry in the BLACK+DECKER BPWM16W?
To wash a load of laundry in the BLACK+DECKER BPWM16W:
Step 1: Power on your washer by pressing the ON/OFF button.
Step 2: Before loading your laundry, be sure to take out coins, keys and other hard objects, and close all zippers to prevent the clothes from damage. Sort laundry by fabric type, soil level, color and load size as needed. You can fill the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub. Load the tub no more than 3/4 full. To ensure good cleaning results do not overload the tub, especially when washing heavily soiled loads. Never load the tub more than 3/4 full. Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or wrinkling of items in the load.
If you need to add a forgotten item:
1. Press the START/PAUSE button to pause the washer.
2. Wait for the tub to stop turning, then open the door.
3. Add the item, close the door, and then press the START PAUSE button. The cycle will resume.
Step 3: Add detergent. This washer is designed for high efficiency (HE) detergent only. Add the recommended amount of detergent directly into the detergent compartment before starting your washer. The normal amount of detergent to use is 1/4 to 1/2 of the maximum amount recommended by the detergent manufacturer. Always reduce the amount of detergent if the load is small or lightly soiled, or if your water is very soft. Never use more than the maximum amount recommended by the detergent manufacturer. Never pour any liquid bleach directly onto the load, as it can cause fabric damage, such as weakening of cloth fibers or color loss.
Step 4: Select your desired cycle and options (refer to cycle selection details in the PDF).
Step 5: Start the cycle by pressing the START/PAUSE button. When the washing cycle begins, the Estimated Time in minutes for the cycle to complete will show and count down in the digital display. Or, if Delay Start is set, the display will count down the hours until the cycle begins, and then change to a minute countdown for the cycle.
What is the purpose of the Spin Only cycle on the BLACK+DECKER BPWM16W?
The Spin Only cycle on the BLACK+DECKER BPWM16W can help remove some moisture from clothing to reduce drying time.
What are the recommended water pressure requirements for the BLACK+DECKER BPWM16W?
To correctly fill the BLACK+DECKER BPWM16W in the proper amount of time, water pressure of 14 to 70psi (100 to 500 kPa) is required. Water pressure less than 14psi may cause water valve failure, or may not allow the water valve to shot off completely, or may extend the fill time beyond what your washer controls allow, causing your washer to turn off and alarm error.
What is the recommended height for the standpipe when setting up the drain facility for the BLACK+DECKER BPWM16W?
The recommended height of the standpipe for the BLACK+DECKER BPWM16W is 35in. or 90cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose.
What is the proper procedure for leveling the BLACK+DECKER BPWM16W washer?
To level the BLACK+DECKER BPWM16W washer:
Step 1. Slide the washer into position.
Step 2. Open the lid of the washer, and pour the water into the tub to just below the pulsator level.
Step 3. If the washer is level, the pulsator is positioned at the center of the washer as shown in the figure. If not, level your washer by turning the front leveling leg clockwise or counterclockwise as necessary. There are TWO adjustable legs.
What are the electrical requirements for powering the BLACK+DECKER BPWM16W washer?
Plug the power cord of the BLACK+DECKER BPWM16W into a 3-prong, well grounded 120 volt 60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. The washer is grounded through the third prong of the power cord when plugged into a 3-prong grounded electrical outlet.
What should be done when storing the BLACK+DECKER BPWM16W washer?
If you want to store the BLACK+DECKER BPWM16W washer at another location, unplug it, drain any remaining water from the drain pipe and hook the pipe onto the back of the washer. Disconnect the water inlet hoses from the faucets and move washer to new location.
What are the RINSE & SPIN CYCLE GUIDE details for the Normal program on the BLACK+DECKER BPWM16W?
The details for the Normal program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Normal | Large | Sm, Med, Lg | – | 15 min | 1 | 8 min | 34 min |
What are the RINSE & SPIN CYCLE GUIDE details for the Heavy program on the BLACK+DECKER BPWM16W?
The details for the Heavy program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Heavy | Large | Sm, Med, Lg | – | 15 min | 2 | 7 min | 52 min |
What are the RINSE & SPIN CYCLE GUIDE details for the Delicate program on the BLACK+DECKER BPWM16W?
The details for the Delicate program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Delicate | Large | Sm, Med, Lg | – | 12 min | 1 | 5 min | 35 min |
What are the RINSE & SPIN CYCLE GUIDE details for the Quick program on the BLACK+DECKER BPWM16W for Small load size?
The details for the Quick program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W when set to Small load size are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Quick | Medium | Sm | – | 3 min | 1 | 4 min | 15 min |
What are the RINSE & SPIN CYCLE GUIDE details for the Quick program on the BLACK+DECKER BPWM16W for Medium load size?
The details for the Quick program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W when set to Medium load size are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Quick | Medium | Med | – | 3 min | 1 | 4 min | 19 min |
What are the RINSE & SPIN CYCLE GUIDE details for the Quick program on the BLACK+DECKER BPWM16W for Large load size?
The details for the Quick program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W when set to Large load size are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Quick | Medium | Lg | – | 3 min | 1 | 4 min | 22 min |
What are the RINSE & SPIN CYCLE GUIDE details for the Bulky program on the BLACK+DECKER BPWM16W?
The details for the Bulky program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Bulky | Large | Sm, Med, Lg | 15 min | 15 min | 2 | 9 min | 69 min |
What are the RINSE & SPIN CYCLE GUIDE details for the Spin Only program on the BLACK+DECKER BPWM16W?
The details for the Spin Only program in the RINSE & SPIN CYCLE GUIDE for the BLACK+DECKER BPWM16W are:
| Program | Default Scope | Load Size | Soak time (approx.) | Wash Time (ap prox.) | Rinse Times | Final Spin Time | Total Time |
|---|---|---|---|---|---|---|---|
| Spin Only | – | – | – | – | – | 24 min | 26 min |
What should I do if the BLACK+DECKER BPWM16W is not filling properly?
If the BLACK+DECKER BPWM16W is not filling properly, possible causes and solutions are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| Washer not filling properly | Filter clogged. | Disassemble the water inlet hose and clean the inlet point. |
| Inlet hoses may be kinked. | Check that inlet hoses are not kinked or clogged. | |
| Insufficient water supply. | Make sure that both hot and cold water faucets are turned on all the way. | |
| The washer lid is open. | The washer will not operate if the lid is open. Close the lid and make sure that nothing is caught under the lid preventing it from closing completely. | |
| Hot and cold inlet hoses are reversed. | Check inlet hose connections. Make sure the hot water supply is connected to the hot inlet valve, and the cold water supply is connected to the cold inlet valve. | |
| Water level is too low. | This is a high efficiency washer. The water will not normally cover the clothes. The fill level is optimized for the wash motion to achieve the best wash performance. | |
| Water inlet valve damaged. | Call to the service center for service. |
What should I do if the BLACK+DECKER BPWM16W washer leaks water every load?
If the BLACK+DECKER BPWM16W leaks water every load, the possible cause is hoses not installed correctly. Check all fill and drain hose connections to ensure that they are tight and secure.
What should I do if the BLACK+DECKER BPWM16W washer will not operate?
If the BLACK+DECKER BPWM16W washer will not operate, possible causes and solutions are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| Washer will not operate | Water supply is turned off. | This is normal. Press the POWER button to turn the washer on. |
| Control panel has powered off due to inactivity. | Make sure cord is plugged securely into a working outlet. | |
| Washer is unplugged. | Turn both hot and cold faucets fully on. | |
| Controls are not set properly. | Make sure the cycle was set correctly, close the lid and press the START/PAUSE button. | |
| Lid is open. | The washer will not operate if the lid is open. Close the lid and make sure that nothing is caught under the lid preventing it from closing completely. | |
| Circuit breaker/fuse is tripped/blown. | Check house circuit breakers/fuses. Replace fuses or reset breaker. The washer should be on a dedicated branch circuit. | |
| Control needs to be reset. | Press the POWER button, then re select the desired cycle and press the START/PAUSE button. | |
| START/PAUSE was not pressed after a cycle was set. | The washer will shut off if the START/PAUSE button is not pressed within ten minutes. | |
| Extremely low water pressure. | Check another faucet in the house to make sure that household water pressure is adequate. | |
| Washer is too cold. | If the washer has been exposed to temperatures below freezing for an extended period of time, allow it to warm up before pressing the POWER button. Otherwise, the display will not come on. | |
| Washer is running under Delay start program. | It’s normal if the unit doesn’t operate under Delay start function. It will start automatically after the delay time is out. |
What should I do if the BLACK+DECKER BPWM16W will not fill properly?
If the BLACK+DECKER BPWM16W will not fill properly, possible causes and solutions are:
| SYMPTOMS | POSSIBLE CAUSE | SOLUTIONS |
|---|---|---|
| The washer does not fill properly | Filter clogged. | Disassemble the water inlet hose and clean the inlet point. |
| Inlet hoses may be kinked. | Verify that the inlet hoses are not kinked or clogged. | |
| Insufficient water supply. | Make sure that both hot and cold water faucets are turned on all the way. | |
| The washer lid is open. | The washer will not operate if the lid is open. Close the lid and make sure that nothing is caught under the lid preventing it from closing completely. | |
| Hot and cold inlet hoses are reversed. | Check inlet hose connections. Make sure the hot water supply is connected to the hot inlet valve, and the cold water supply is connected to the cold inlet valve. | |
| Water level is too low. | This is a high efficiency washer. The water will not normally cover the clothes. The fill level is optimized for the wash motion to achieve the best wash performance. | |
| Water inlet valve damaged. | Call to the service center for service. |
What should I do if the BLACK+DECKER BPWM16W washer will not drain water?
If the BLACK+DECKER BPWM16W washer will not drain water, check troubleshooting for Washer will not drain water.
What is the recommended way to clean the exterior of the BLACK+DECKER BPWM16W?
To clean the exterior of the BLACK+DECKER BPWM16W, turn off the water faucets after finishing the day’s washing to shut off the water supply and prevent the unlikely possibility of damage from escaping water. Leave the lid open to allow the inside of your washer to dry out. Use a soft cloth to wipe up all detergent, bleach or other pills as they occur. Clean the Control Panel with a soft, damp cloth. Do not use abrasive powders or pads. Do not spray cleaners directly onto the panel.
What is the recommended procedure for cleaning the interior of the BLACK+DECKER BPWM16W washer?
Clean the interior of the BLACK+DECKER BPWM16W washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your washer as a result of washing clothes. Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent stains on your washer or laundry. Hard water deposits may be removed, if needed, by using cleaners labeled “Washer safe”.
How do I correctly connect the Quick Connection Adaptor for the BLACK+DECKER BPWM16W for temporary connection?
For the Quick Connection Adaptor on the BLACK+DECKER BPWM16W:
Pull back on the white ring to free the faucet fitting from the adaptor for installation into the faucet.
Screw the end of the COLD water hose onto the base of the hose fitting.
If the faucet has internal screw threads, unscrew the aerator if present from the tip of the faucet. Then screw the faucet fitting into the faucet. Make sure that the black rubber gasket is on the top of the adaptor before screwing it in.
If the faucet has external screw threads, remove the gasket from the top of the faucet fitting, and screw the fitting over the external threads.
Pull back on the white ring to connect the two parts of the adaptor back together.
NOTE: When connected to a single faucet that can dispense either hot or cold water, both hot and cold water can be run through the cold water line. It is recommended to ONLY run COLD water washes when the adapter is connected to such a faucet.
What are the steps to install the Bottom Cover on the BLACK+DECKER BPWM16W?
Step 2 for the BLACK+DECKER BPWM16W is to Install the Bottom Cover by sliding the bottom cover into the slots on the bottom surface of the unit as shown in the figure, and fix it with the one screw attached with the unit.
What are the drain hose positioning methods for the BLACK+DECKER BPWM16W?
The drain hose on the BLACK+DECKER BPWM16W is connected to the bottom side of the unit. The other end of the hose should be positioned using one of the following methods:
A. Over the edge of a wash basin. Secure the guide to the side of the basin wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.
B. In a standpipe. The standpipe must be no shorter than 32 in. (81cm) and no longer than 39 in. (100cm).
C. In a laundry tub. The laundry tub must be no shorter than 32 in. (81cm) and no higher than 39 in. (100cm). Make sure that the connection between the drain hose and the wash basin, standpipe or laundry tub is not airtight.
What should I do if the BLACK+DECKER BPWM16W washer is too cold?
If the BLACK+DECKER BPWM16W washer is too cold, you should press the POWER button, then re select the desired cycle and press the START/PAUSE button. If the washer has been exposed to temperatures below freezing for an extended period of time, allow it to warm up before pressing the POWER button. Otherwise, the display will not come on.
CLICK HERE TO DOWNLOAD BLACK+DECKER BPWM16W (01) PDF DOCUMENT