BAUHN ABTWPDQ-0223-W (01) PDF Document

The packaging for the BAUHN ABTWPDQ-0223-W includes the following items:

• Full HD Webcam
• Lens Cover
• USB Cable
• User Guide
• Warranty Certificate

The product overview identifies the following components:

• A. USB Port (back of webcam)
• B. Microphone
• C. Camera lens
• D. Mounting base

To mount the webcam, follow these steps:

1. Open up the mounting base of the webcam.
2. Mount onto the edge of your monitor/display, ensuring that the mounting base is flush with the back of your monitor.
3. Adjust the angle of the webcam to your desired direction.

Follow these instructions to connect the device:

1. Plug in the supplied USB cable to the USB port on the back of the webcam, and the other end to a USB port on your PC/laptop.
2. Once connected, the webcam will automatically start installing. It will take around 1 minute.

To ensure the webcam has been installed successfully on a Windows PC/laptop:

Go to Computer Management > Device Manager > Cameras and “ABTWPDQ-0223-W” should appear.

To ensure the webcam has been installed successfully on a Mac:

Go to Applications > Photo Booth and “ABTWPDQ-0223-W” should appear.

When using the webcam for video calling, ensure that both you and the other party have:

• Speaker on headset
• Microphone
• Internet connection

If the webcam is not working on specific video applications, try the following:

• Some applications including Skype use a different camera by default. Go to the video settings on the app and select the correct camera as the video resource.
• Some applications require enabling from the Chrome browser. Go to Settings > Search Camera > Site Settings and select the applications you want to enable and change the camera permissions to “allow”.
• Ensure the USB cable is connected to the USB port of your laptop/computer.

If the webcam is not recognized:

After connecting the USB cable to the USB port of your laptop/computer, go to: Control Panel > System and Security > System > Device Manager.

• Location: Make sure the location for the product is well ventilated, and away from damp and cold, protected from overheating and away from direct sunlight, away from moisture drips or splashes and protected from excessive dust or grease.
• Heat: Do not place the product set near heat sources (eg. radiators, stoves, electrical equipment, amplifiers).
• Water: Do not place containers with liquids (eg. vases) or with small metallic objects on top of the product.
• Fire: Do not place any naked flame sources (eg. lit candles, cigarettes) on the product.

Unplug or turn off the product before cleaning it.

Only use a soft, dry cloth for cleaning the product; do not use a damp cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air freshener, lubricant, detergent or other chemicals. Wipe off any moisture, dirt or dust on the power plug pins with a clean, dry cloth.

• Always ensure your computer has the latest software updates which helps patch vulnerabilities in your software that could allow hackers access to your device.
• Install and run security software.
• Use a secure login password for your computer.
• Unplug the webcam when not in use.

Responsible disposal of the packaging

The packaging of your product has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please recycle these materials rather than throwing them away.

Responsible disposal of the product

At the end of its working life, do not throw this product out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could potentially be hazardous to the environment and human health.