FREE ENGLISH BARCO TLD HB (01) PDF USER GUIDE
FREE ENGLISH BARCO TLD HB (01) PDF USER MANUAL
FREE ENGLISH BARCO TLD HB (01) PDF OWNER GUIDE
FREE ENGLISH BARCO TLD HB (01) PDF OWNER MANUAL
FREE ENGLISH BARCO TLD HB (01) PDF REFERENCE GUIDE
FREE ENGLISH BARCO TLD HB (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BARCO TLD HB (01) PDF REFERENCE MANUAL
FREE ENGLISH BARCO TLD HB (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BARCO TLD HB (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BARCO TLD HB (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the TLD HB (1.6-2.0:1) Lens Kit (R9842060)?
The kit contains the following items:
- TLD HB (1.6-2.0:1) Lens
- Installation Manual
- Toraysee™ Cloth
How do I remove the installed lens from an SLM series projector?
Necessary Tools: No tools are necessary.
Procedure:
Procedure:
- Support the lens with one hand.
- Move the handle of the lens anchor system to the left.
- Take the lens unit out of the lens block.
How do I install the new TLD HB (1.6-2.0:1) lens?
Necessary Tools: No tools are necessary.
Procedure:
Caution: For a table-mounted projector, hold the projector when pushing the lens into the lens block to avoid it sliding off the table.
Procedure:
- Take the lens assembly out of its packing material and remove the lens caps on both sides.
- Move the handle (A) of the lens anchor system to the right.
- Push the lens, with the motors at the top, into the lens block gap horizontally. Ensure you line up the motor connector on the lens with the connector on the lens block (B). Continue pushing until the lens clicks into the lens anchor system.
Caution: For a table-mounted projector, hold the projector when pushing the lens into the lens block to avoid it sliding off the table.
How do I perform a quick zoom/focus adjustment?
- Press the Selection key (*, Barco key). The zoom/focus menu will be displayed.
- Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
- When finished, press the EXIT key to return or press ENTER to continue to the shift adjustment.
How do I perform a quick shift adjustment?
- Press the Selection key (*, Barco key). The zoom/focus menu will be displayed.
- Press ENTER. The shift menu will be displayed.
- Push the cursor key ↑ or ↓ to shift the image up or down, and ← or → to shift the image left or right.
- When finished, press the EXIT key to return or press ENTER to continue to zoom/focus.
How do I calculate the projector distance (PD)?
To calculate the distance between the projector frontside and the screen (PD) for a given screen width (SW), use the following formulas:
Metric formulas (PD and SW in meters)
Inch formulas (PD and SW in inches)
Where:
Metric formulas (PD and SW in meters)
| Barco Projector SLM Graphics (G) series | Barco Projector SLM Reality (R) series |
|---|---|
| PDmin=1.62xSW-0.09 | PDmin=1.59xSW-0.09 |
| PDmax=2.03xSW-0.13 | PDmax=2.00xSW-0.13 |
Inch formulas (PD and SW in inches)
| Barco Projector SLM Graphics (G) series | Barco Projector SLM Reality (R) series |
|---|---|
| PDmin=1.62xSW-3.54 | PDmin=1.59xSW-3.54 |
| PDmax=2.03xSW-5.12 | PDmax=2.00xSW-5.12 |
Where:
- SW = Screen Width (Image Width)
- PD = Projector Distance (distance between screen and projector frontside)
- PDmin = Minimum Projector Distance
- PDmax = Maximum Projector Distance
How should I clean the lens?
To minimize the possibility of damaging the optical coating or scratching the exposed lens surface:
- FIRST, try to remove any material from the lens by blowing it off with clean, dry deionized air.
- If further cleaning is needed, always wipe lenses with a CLEAN Toraysee™ cloth (provided with the lens kit, Order number: R379058).
- Always wipe lenses in a single direction.
What precautions should I take when cleaning the lens and the cleaning cloth?
- Always use a CLEAN Toraysee™ cloth.
- Wipe in a single direction. Do not wipe back and forth, as this tends to grind dirt into the coating.
- Do not leave the cleaning cloth in an open room or lab coat pocket, as this can contaminate the cloth.
- If smears occur when cleaning, replace the cloth. Smears indicate a dirty cloth.
- Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth.
- Do not use liquid cleaners on the cloth, as doing so will contaminate the cloth.
- DO NOT use any liquid to clean the lenses themselves. Only use clean, dry deionized air and the recommended cloth.
CLICK HERE TO DOWNLOAD BARCO TLD HB (01) PDF MANUAL