FREE ENGLISH BALT BLT-27501 (01) PDF USER GUIDE
FREE ENGLISH BALT BLT-27501 (01) PDF USER MANUAL
FREE ENGLISH BALT BLT-27501 (01) PDF OWNER GUIDE
FREE ENGLISH BALT BLT-27501 (01) PDF OWNER MANUAL
FREE ENGLISH BALT BLT-27501 (01) PDF REFERENCE GUIDE
FREE ENGLISH BALT BLT-27501 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH BALT BLT-27501 (01) PDF REFERENCE MANUAL
FREE ENGLISH BALT BLT-27501 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH BALT BLT-27501 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD BALT BLT-27501 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What parts are included with the BLT-27501 Low Laser Stand?
| Part | Description | Qty |
|---|---|---|
| P1 | Leg Frame | 2 EA |
| P2 | Upper Shelf Platform | 1 EA |
| P3 | Bottom Platform | 1 EA |
| P4 | Stability Brace | 1 EA |
| P5 | Handle | 1 EA |
What hardware is included for assembly?
| Part | Description | Qty |
|---|---|---|
| A | 1-5/8″ Socket Screw (M6 X 1-5/8″) | 14 EA |
| B | Locking Caster 1-1/2″ | 2 EA |
| C | Caster 1-1/2″ | 2 EA |
| D | Allen Wrench | 1 EA |
| E | Caster Wrench | 1 EA |
How do I assemble the Low Laser Stand?
READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. We recommend that you assemble this unit on a table.
1. Identify and Separate all the Parts and Hardware.
2. Attach Handle (P5) to the Upper shelf Platform (P-2) using 2 each (A) screws as shown in illustration # 1. (Tighten screws using Allen Wrench (D))
3. Attach the 2 each Leg Frames (P-1) to the Upper Shelf Platform (P2), the Lower Shelf Platform (P3), and the Stability Brace (P-4) using 12 each (A) screws as shown in illustration # 2. (Finger tighten only)
4. Attach 2 Locking Casters (B) to the front, and 2 Casters (C) to the back of the unit. Tighten all Casters using Caster Wrench (E).
5. Tighten all socket head screws using allen wrench (D).
Are there any usage and maintenance recommendations?
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer using factory authorized parts.
What are the dimensions of the assembled stand?
Overall Width: 17 1/2 inches
Overall Height: 13 3/4 inches
Top Shelf Width: 17 inches
Top Shelf Depth: 15 1/2 inches
Bottom Shelf Width: 17 inches
Bottom Shelf Depth: 15 1/2 inches
Height to Top Shelf: 10 1/4 inches
Height between Shelves: 5 3/4 inches
CLICK HERE TO DOWNLOAD BALT BLT-27501 (01) PDF MANUAL