BACKYARD DISCOVERY BEACH FRONT 1605022 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD BACKYARD DISCOVERY BEACH FRONT 1605022 (01) PDF MANUAL


PDF Content Summary: MANUFACTURED Beach Front Wooden Swing Set Backyard 3305 Airport Discovery Drive BY: Model # 1605022 Owner's Manual & Assembly Instructions Pittsburg, KS 66762 800-856-4445 average 2 person assembly time assembly time may vary based on skill level For the most up to date assembly manual, to register your set, or to order replacement parts please visit backyarddiscovery.com SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT YOU NEED TO ORDER REPLACEMENT PARTS. Made in China | INS-1605022-A-BEACH FRONT-ENG 02/28/19 GOCONFIGURE Putting it all together for you INSTALLATION SERVICES AVAILABLE! Need a Helping Hand? Let our team of professionals handle the installation for you! GOCONFIGURE 888-888-5424 With Go Configure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don't have the time or ability to deliver & install themselves. We do the heavy lifting, so you don't have to! • 18+ Years of Experience Servicing Big Box Retailers and Direct Consumers • Highly skilled, Specialized, Courteous, Professional Service Technicians • Over 140,000 Installations Annually • White Glove Service • Satisfaction Guarantee • Flexible Appointments, including weekends • Coverage across the nation Visit goconfigure.com for more info! *Installation services are only available to U.S. customers. STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto. Si tiene preguntas sobre el ensamblaje o si necesita piezas debido a que faltan o están dañadas llame gratis a la línea de ayuda 1-800-856-4445 PLEASE READ THIS BEFORE STARTING ASSEMBLY POR FAVOR LEA ESTAS INSTRUCCIONES ANTES DE COMENZAR EL ENSAMBLAJE • READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND SAFETY INFORMATION. • AFTER YOU HAVE READ THE ASSEMBLY MANUAL, YOU WILL BE ABLE TO DECIDE IF YOU NEED PROFESSIONAL HELP TO COMPLETE THE ASSEMBLY OF THE STRUCTURE. • SEPARATE AND IDENTIFY ALL PARTS TO MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED. • IF YOU CAN’T FIND ALL OF THE PARTS, CHECK THE PACKING MATERIAL. SMALL PARTS MAY HAVE FALLEN INTO IT DURING SHIPMENT. • IF YOU HAVE PROBLEMS WITH THE ASSEMBLY OR IF ANY PART IS MISSING OR DAMAGED, PLEASE CALL THE HELP LINE 1-800-856-4445 OR VISIT swingsetsonline.com • LEA EL MANUAL DE ENSAMBLAJE COMPLETAMENTE, PRESTANDO ESPECIAL ATENCIÓN A LOS CONSEJOS ÚTILES IMPORTANTES Y A LA INFORMACIÓN SOBRE SEGURIDAD. • DESPUÉS DE QUE HAYA LEÍDO EL MANUAL DE ENSAMBLAJE, PODRÁ DECIDIR SI NECESITA AYUDA PROFESIONAL PARA EFECTUAR EL ENSAMBLAJE DE LA ESTRUCTURA. • SEPARE E IDENTIFIQUE TODAS LAS PIEZAS PARA COMPROBAR QUE DISPONE DE TODAS LAS PARTES INDICADAS. • SI NO PUEDE ENCONTRAR TODAS LAS PIEZAS, REVISE EL MATERIAL DE EMPAQUE. ES POSIBLE QUE ALGUNAS PIEZAS PEQUEÑAS PUEDAN HABERSE CAÍDO ALLÍ DURANTE EL ENVÍO. • MANTÉNGASE ALEJADO DE LOS NIÑOS MENORES A LA EDAD RECOMENDADA. • SI TIENE PROBLEMAS CON EL ENSAMBLAJE O SI ALGUNA PIEZA FALTA O ESTÁ DAÑADA, LLAME A LA LÍNEA DE AYUDA AL 1-800-856-4445 O VISITE swingsetsonline.com PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL: 1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL 2 – DESRIPTION OF THE PART FROM THE PARTS LIST POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME: 1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL DE ENSAMBLAJE 2 - DESCRIPCIÓN DE LA PIEZA QUE SE ENCUENTRA EN LA LISTA DE PIEZAS Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application. WARNING: This Symbol points out important safety instructions which, if not followed, could endanger the personal safety of yourself and your children and/or damage your property. You MUST read and follow all instructions in this manual before attempting to use this playcenter. WARNING: Children must NOT use this playcenter until unit has been completely assembled and inspected by an adult to insure set has been properly installed and anchored. Please follow all recommendations below. Failure to do so may result in the warranty being void and/or safety violations that could result in serious injury. This manual contains helpful information concerning Assembly Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your children in mind as your play structure is being built and as your children play on the set. Before your children play on the set please review the Operation Instructions with them to help ensure their safety. PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE WHERE YOU CAN REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE MOST EFFICIENT SERVICE, IT IS REQUIRED THAT YOU PROVIDE US WITH THE PART NUMBERS WHEN ORDERING PARTS. For Your Records: Please take time and fill out the information below. This information will be needed for warranty issues. Where Purchased: ____________________ Date of Purchase: ____________________ Installation Date: _____________________ Installed by: _________________________ Tracking Number: ____________________ Tracking Number Vertical ID Plate Tracking Number Reference Label Tracking ID number on the carton and back of the ID plate or vertical ID plate are included for tracking purposes associated with warranty claims. Owner’s Manual Play Set Staple Receipt Here OR Rev10/14/13 Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3. Place the equipment not less than 6 ft (1.8 m) from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 4. Provide enough room so that the children can use the equipment safely. For example, for structures with multiple play activities, a slide should not exit in front of a swing. 5. It is a good idea to place your Playcenter in an area that is convenient for adults to watch children at play. 6. Create a site free of obstacles that could cause injuries – such as low overhanging tree branches, overhead wires, tree stumps and/or roots, large rocks, bricks and concrete. Additional suggestions in the Suggested Playground Surfacing Section. 7. Do not build your playset on top of surfacing material. 8. Locate bare metal platforms and slides out of direct sunlight to reduce the likelihood of serious burns. A slide that faces north will receive the least direct sunlight. 9. Separate active and quiet activities from each other. For example, locate sandboxes away from swings or use a guardrail or barrier to separate the sandbox from the movement of the swings. Suggested Playground Surfacing ❑ Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. ❑ Do not install loose fill surfacing over hard surfaces such as concrete or asphalt. ❑ Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing materials after assembly. If used properly these materials can absorb some of the impact of a child’s fall. ❑ All surface material should extend a minimum of 6 feet in all directions around the play area. ❑ Do not apply playground surfacing until after the unit is completely constructed. Playset should not be built on top of surfacing. ❑ Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. ❑ Installations of rubber tiles or poured-in-place surfaces (other than loose-fill materials) generally require a professional and are not “do-it-yourself” projects. ❑ Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the safety standard ASTM F1292 Standard Specification of Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. Rev10/14/13 The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.52m) 9' (2.74m) 5' (1.52m) Coarse Sand 5' (1.52m) 5' (1.52m) 6' (1.83m) 4' (1.22m) Fine Gravel 5' (1.52m) 7' (2.13m) 10' (3.05m) 6' (1.83m) Medium Gravel 5' (1.52m) 5' (1.52m) 6' (1.83m) 5' (1.52m) Shredded Tires* 10-12' (3.0-3.6m) N/A N/A N/A *This data is from tests conducted by independent testing laboratories on a 6-inch depth of uncompressed shredded tire samples produced by four manufacturers. The tests reported critical heights, which varied from 10 feet to greater than 12 feet. It is recommended that persons seeking to install shredded tires as a protective surface request test data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292. Operating Instructions: NOTE: Your children’s safety is our #1 concern. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children. 1. This Playcenter is designed for specific number of occupants whose combined weight should not exceed a designated weight on the elevated floor or the swing area, the total Unit capacity is outlined in the Basic Setup Dimensions section of instruction manual. The maximum fall height and recommended play area is also available in the Basic Setup Dimensions section of the manual for the specific unit. 2. On-site adult supervision is required. 3. Instruct children not to walk close to, in front of, behind, or between moving swings or other moving playground equipment. 4. Instruct children to sit in and never stand on swings 5. Instruct children not to twist the chains and ropes and not to loop them over the top support bar, since this may reduce the strength of the chain or rope. 6. Instruct children not to jump from swings or other playground equipment in motion. 7. Instruct children to not to push empty seats. The seat may hit them and cause serious injury. 8. Instruct and teach children to sit in the center of the swings with their full weight on the seats. 9. Instruct children not to use the equipment in a manner other than intended. 10. Instruct children to always go down slides feet first. Never slide head first. 11. Instruct children to look before they slide to make sure no one is at the bottom. 12. Instruct children to never run up a slide, as this increases their chances of falling. 13. The parents should dress children appropriately. (Examples would include the use of well- fitting shoes and the avoidance of ponchos, scarfs, and other loose-fitting clothing that is potentially hazardous while using equipment). 14. Instruct children not to climb when the equipment is wet. 15. Instruct children to never jump from a fort deck. They should always use the ladder, ramp or slide. 16. Instruct children to never crawl or walk across the top of monkey bars. 17. Instruct children to never crawl on top of a fort roof. Owner’s Manual Play Set Rev10/14/13 Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21. Instruct children to never slide down the swing chain. 22. Instruct children to remove their bike or other sports helmet before playing on playground equipment. Maintenance Instructions: At the beginning of each play season: • Tighten all hardware. • Lubricate all metallic moving parts per manufacturer’s instructions. • Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing. • Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. • Check metal parts for rust. If found, sand and repaint using a non Lead-based paint meeting the requirements of 16 CFR 1303. • Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members. • Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season. • Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Twice a month during play season: • Tighten all hardware. • Check all protective coverings on bolts, pipes, edges, & corners. Replace if they are loose, cracked, or missing. • Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. • Once a month during play season. • Lubricate all metallic moving parts per manufacturer’s instructions. • Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other deterioration. Replace as needed. At the end of each play season or when the temperature drops below 32° F: • Remove plastic swing seats and other items as specified by the manufacturer and take indoors or do not use. • Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary. Owners shall be responsible for maintaining the legibility of the warning labels. Rev10/14/13 Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment. Treat your playset with stain regularly, to help prevent severe checking/splitting and other weather damage. • A waterbourne transparent stain has been applied to your playset. This is done for color only. Once or twice a year, depending on your climate conditions, you must apply some type of protection (sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any “rough” spots on your playset. Please note this is a requirement of your warranty. • Assembling and maintaining the playset on a level location is very important. As your children play, your playset will slowly dig its way into the soil, and it is very important that it settles evenly. Make sure the playset is level and true one each year or at the beginning of each play season. Disposal Instructions: When the Playcenter use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded. Third Party Assembly: Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the Customer for any assembly services’. Please see our warranty for more information about damaged and missing part replacement coverage. Backyard Discovery will not reimburse Customer for the price of parts purchased. Rev10/14/13 Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: cpsc.gov/cpscpub/pubs/323.html. X3. HANDBOOKSECTION 9 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292. There are different types of surfacing to choose from; whichever product you select, follow these guidelines: X3.1.1 Loose-Fill Materials: X3.1.1.1 Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber (EWF), or shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing overtime. The surfacing will also compact, displace, and settle, and should be periodically refilled to maintain at least a 9-inch depth. X3.1.2 Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.) NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing. Ground level equipment such as a sandbox, activity wall, playhouse or other equipment that has no elevated play surface – does not need any protective surfacing. X3.1.3 Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to account for water drainage. X3.1.3.1 Check and maintain the depth of the loose-fill surfacing material. To maintain the right amount of loose-fill materials, mark the correct level on play equipment support posts. That way you can easily see when to replenish and/or redistribute the surfacing. X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or asphalt. X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-fill materials – like rubber tiles or poured-in-place surfaces. X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself” projects. X3.1.4.2 Review surface specification before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that the product has been tested to the following safety standard: ASTM F 1292 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended to protect against serious head injury. This height should be equal to or greater than the fall height – vertical distance between a designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below – of your play equipment. X3.1.4.3 Check the protective surfacing frequently for wear. X3.1.5 Placement — Proper placement and maintenance of protective surfacing is essential. Be sure to: X3.1.5.1 Extend surfacing at least 6 feet from the equipment in all directions. X3.1.5.2 For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top bar from which the swing is suspended. 9 This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1-800-638-2772. The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility. The standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either approved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM Headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards. 100 Barr Harbor Drive, West Conshohocken, PA 19428. Rev10/14/13 Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3. What age range is appropriate for the playsets? Backyard Discovery playsets are recommended for children ages 3 – 10 years. 4. Is the wood treated with chemicals? Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your child’s safety, our wood is completely chemical free and we do not use pressure-treated wood. The stain we use is a top coat using a water- based product that is for appearance only. 5. How often should the playset be stained? Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer’s discretion. 6. Why does it seem that my swing set is developing cracks? Wood is a natural material; no two pieces are exactly alike. Each piece has its own characteristics and personality and reacts differently to climate changes. When any wood product is exposed to the elements, it develops “wood checks”. A check is the radial separation of the wood fibers running with the grain of the wood. These are caused by the varying temperature and moisture conditions. A check is not a crack – it does not affect the strength or durability of the wood or structural integrity of the play set. 7. Do Backyard Discovery playsets come with a warranty? Yes. All Backyard Discovery products carry a 1-year replacement warranty on all parts for manufacturer’s defect. Our wood carries a 5 year warranty on rot and decay as well. Please see warranty details for more information. 8. What is the best way to get started assembling the playset? Backyard Discovery recommends taking all the parts out of the boxes and arranging them by part number before you begin any assembly. This will not only allow faster assembly, but will also identify any parts that may be missing or damaged so they can be replaced before assembly. If parts are missing or need replacement, go to swingsetsonline.com/support.aspx and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from Backyard Discovery’s website: swingsetsonline.com. 9. The playset seems to rock or sway too much. What’s wrong? Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails. These should be removed and the ground underneath re-leveled to prevent rocking. Also ensure the playset is securely staked to the ground using the stakes provided. 10. The 2”x4” boards do not measure 2”x 4”. Why not? In the U.S. it is common practice to describe lumber dimensions using the rough cut sizes from the sawmill and not the finished dimensions. Retailers, home stores, etc. all use this accepted practice for describing lumber dimensions. However, Backyard Discovery playsets are designed and constructed using the actual dimensions so everything fits properly and remains so during the life of the playset. 11. The end beam is not straight up and down. Why not? This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting. 12. The S-hooks for the swings won’t close. What is wrong? Backyard Discovery recommends placing them on a hard surface such as concrete (don’t do this on anything that will dent such as metal or finished wood or glass which will break!). It will take quite a few strokes, but the hooks will close. For more information and frequently asked questions, please refer to our website at swingsetsonline.com. Tools Required for Installation: (These are the tools that are generally required for assembly of our swing sets. These tools are not included in the swing set purchase.) (Level 24") (Open End Wrenches 1/2") (Square) (Tape Measure) (3/8" Drive Ratchet, 1/2" STD Sockets 1/2" Deep Sockets) (Claw Hammer) (Cordless Drill or Electric Drill) (3/16" , 5/16", 1/8" & 3/8" Drill Bits) (Drill Attachments: Phillips Head & Socket Driver) (An Adult w/ an Adult Helper) (Phillips & Straight Blade Screw Drivers) (Rubber Mallet - Optional) (Ladder) «SPANISH Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 6'-0" 26'-1 1/8" 14'-4 5/8" 6'-0" 26'-4 5/8" 5'-2" General Information: Your set has been designed and engineered for children only and 14'-1 1/8" for residential use only. Safe Play Zone A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use. A maximum of 9 children 6'-9 13/16" is recommended for this swing set. Safe play height: 14'-11 1/2" [2.7 m] Maximum fall height: 6'-4 1/2" [1.9 m] 9'-10 1/4" 4'-0" Important Assembly Notes 1) While assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to ensure the fort is square. 2) Tighten bolts securely, tighten nuts on bolts flush to the tube or member. 3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when sorting your wood and hardware. Assembly will be made easier if items are sorted by phase. 4) Pay close attention to make sure you are using the correct hardware in the correct phases. Using incorrect hardware may result in improper assembly. 5) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer. Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut. DO NOT over tighten. 6) Read the steps of each phase thoroughly. The written steps may include important information not shown in the illustrations. Parts Identification Wood Components (NOT TO SCALE) M77 - SLIDE BRACE - W100544 5/8"x3 3/8"x17 1/4" (16x86x438) (1)M78 - CENTER SLIDE BRACE - W100545 5/8"x3 3/8"x17 1/4" (16x86x438) (2) E4 - UPRIGHT - W2A01970 1 3/8"x3 3/8"x57 3/8" (36x86x2274) (1) Q2 - SANDBOX SEAT SUPPORT - W4L06434 1"x4 3/8"x8" (24x112x202) (4) J9 - SUPPORT BOARD - W4L06064 1"x2 3/8"x3" (24x60x76) (4) J2 - SHELF SUPPORT - W4L06903 1"x2 3/8"x2 3/8" (24x60x60) (2) E1 - UPRIGHT - W4L06890 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E2 - UPRIGHT - W4L06891 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E3 - UPRIGHT - W4L06892 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) K1 - GROUND BOARD - W4L06893 5/8"x5 1/4"x79 7/8" (16x134x2028) (1) K2 - GROUND BOARD - W4L06894 5/8"x5 1/4"x43 1/4" (16x134x1097) (4) K3 - GROUND BOARD - W4L06896 5/8"x5 1/4"x42 1/8" (16x134x1070) (2) M1 - SAFETY BOARD - W4L06895 5/8"x3 3/8"x40 7/8" (16x86x1038) (1) M2 - FLOOR RAIL - W4L06897 5/8"x3 3/8"x43 1/4" (16x86x1097) (1) H1 - FLOOR RAIL - W4L06898 1"x3 3/8"x42 1/8" (24x86x1070) (1) J1 - WALL RAIL - W4L06900 1"x2 3/8"x40 7/8" (24x60x1038) (1) Parts Identification Wood Components (NOT TO SCALE) (1) K4 - GROUND BOARD - W4L06899 5/8"x5 1/4"x61" (16x134x1549) (1)K6 - GROUND BOARD - W4L06904 5/8"x5 1/4"x44 1/2" (16x134x1129) (1) K5 - SERVING SHELF - W4L06902 5/8"x5 1/4"x40 7/8" (16x134x1038) (1) J6 - LADDER RAIL - W4L06910 1"x2 3/8"x50 1/8" (24x60x1273) (1)J3 - ANGLE BRACE - W4L06905 1"x2 3/8"x47 1/4" (24x60x1200) (1) N1 - AWNING BOARD - W4L06907 5/8"x2 3/8"x34 1/8" (16x60x866) (4) H2 - DECK BRACE - W4L06909 1"x3 3/8"x18 3/4" (24x86x475) (2) G2 - SANDBOX SEAT - W4L06433 1"x5 1/4"x14 5/8" (24x134x370) (2) J4 - AWNING BOARD - W4L06906 1"x2 3/8"x14 1/8" (24x60x358) (7) O1 - PICKET - W4L06901 5/8"x1 3/8"x13 1/4" (16x34x336) (1) M3 - LADDER RUNG - W4L06912 5/8"x3 3/8"x20 1/4" (16x86x515) (2) J5 - AWNING SUPPORT - W4L06908 1"x2 3/8"x11 3/4" (24x60x298) (1) J7 - LADDER RAIL - W4L06911 1"x2 3/8"x50 1/8" (24x60x1273) (6) M4 - LADDER RUNG - W4L06913 5/8"x3 3/8"x20 1/4" (16x86x515) (1) M5 - FLOOR RAIL - W4L06914 5/8"x3 3/8"x43 1/4" (16x86x1097) (1) H3 - FLOOR SUPPORT - W4L06915 1"x3 3/8"x40 7/8" (24x86x1038) (1) Y1 - FLOOR BOARD - W4L06916 5/8"x4"x40 3/8" (16x102x1024) (1) H10 - FLOOR RAIL - W4L07317 1"x3 3/8"x42 1/8" (24x86x1070) Parts Identification Wood Components (NOT TO SCALE) Y2 - FLOOR BOARD - W4L06917 5/8"x4"x40 3/8" (16x102x1024) (1) M6 - FLOOR BOARD - W4L06918 5/8"x3 3/8"x45 1/8" (16x86x1145) (10) M7 - WALL RAIL - W4L06919 5/8"x3 3/8"x41 1/2" (16x86x1054) (2) M8 - WALL RAIL - W4L06920 5/8"x3 3/8"x42 1/8" (16x86x1070) (2) M9 - WALL RAIL - W4L06941 5/8"x3 3/8"x43 1/4" (16x86x1097) (1) M10 - WALL RAIL - W4L06942 5/8"x3 3/8"x43 1/4" (16x86x1097) (1)M11 - ARCHED WALL RAIL - W4L06943 5/8"x3 3/8"x43 1/4" (16x86x1097) (1) O2 - PICKET - W4L06944 5/8"x1 3/8"x18 1/4" (16x34x465) (23)G1 - SWING BEAM MOUNT - W4L06945 1"x5 1/4"x40 7/8" (24x134x1038) (1)H4 - HORIZONTAL TARP SUPPORT - W4L06946 1"x3 3/8"x56 1/8" (24x86x1425) (2) J8 - WALL BOARD - W4L06947 1"x2 3/8"x25" (24x60x634) (1)O3 - SAFETY BOARD - W4L06948 5/8"x1 3/8"x40 7/8" (16x34x1038) (2) H5 - HORIZONTAL TARP SUPPORT - W4L06949 1"x3 3/8"x48 3/4" (24x86x1237) (2) H6 - ROOF BOARD - W4L06950 1"x3 3/8"x40 3/8" (24x86x1025) (4) T1 - ROOF BOARD - W4L06951 1"x1 3/8"x48 3/4" (24x34x1237) (1) J10 - ROOF BOARD - W4L06952 1"x2 3/8"x4" (24x60x102) (2) N2 - ROOF BOARD - W4L06953 5/8"x2 3/8"x33 1/8" (16x60x840) (2) Parts Identification Wood Components (NOT TO SCALE) Y3 - SUNBURST HALF MOON - W4L06954 5/8"x4"x12" (16x102x306) (2) N3 - SUNBURST BOARD - W4L06955 5/8"x2 3/8"x11 3/4" (16x60x299) (2) N4 - SUNBURST BOARD - W4L06956 5/8"x2 3/8"x8 1/8" (16x60x205) (4) O4 - AWNING BOARD - W4L06957 5/8"x1 3/8"x32 1/4" (16x34x818) (1) SB74 - SWING BEAM EXTENDED - W4L06961 2"x5 1/4"x89 1/2" (50x134x2274) (1) E77 - ANGLE BRACE - W4L06962 1 3/8"x3 3/8"x74 3/8" (36x86x1890) (2) W71 - SWING BEAM SUPPORT - W4L06963 2"x3 3/8"x49 5/8" (50x86x1260) (1)E5 - MONKEY BAR UPRIGHT - W4L06964 1 3/8"x3 3/8"x70 3/8" (36x86x1786) (2) H81 - MONKEY BAR BRACE - W4L06965 1"x3 3/8"x19 3/8" (24x86x492) (2) M82 - MONKEY BAR GROUND BOARD - W4L06966 5/8"x3 3/8"x40 3/8" (16x86x1026) (1) H7 - BENCH GROUND BOARD - W4L06967 1"x3 3/8"x18 1/8" (24x86x460) (2) H8 - BENCH UPRIGHT - W4L06968 1"x3 3/8"x11 3/4" (24x86x300) (2)H9 - BENCH SEAT SUPPORT - W4L06969 1"x3 3/8"x6 1/2" (24x86x166) (2) M12 - BENCH SEAT - W4L06970 5/8"x3 3/8"x26" (16x86x660) (2)E7 - MONKEY BAR RAIL - W4L06938 1 3/8"x3 3/8"x48" (36x86x1219) (2) H79 - END SUPPORT - W4L06923 1"x3 1/2"x42" (24x86x1072) (1) Parts Identification Hardware (19) CM - BOLT WH 5/16x1/2 - H100115 (1) AB - LAG SCREW WH 5/16x3 - H100029 (2) YK - BOLT WH 5/16x3/4 - H100222 (19) D - NUT BARREL WH 5/16x7/8 - H100005 (6) BZ - 9 1/2" SWING HANGER QUICK LINK - H100099 (1) KA - BOLT WH 5/16x4 1/2 - H100021 (12) Z - LAG SCREW WH 5/16x2 - H100027 (8) F - BOLT WH 5/16x1 - H100008 (2) G - BOLT WH 5/16x1 1/4 - H100009 (19)H - BOLT WH 5/16x1 1/2 - H100010 (8) J - BOLT WH 5/16x1 3/4 - H100011 (30) K - BOLT WH 5/16x2 - H100012 (20)L - BOLT WH 5/16x2 1/4 - H100013 (2) M - BOLT WH 5/16x2 1/2 - H100014 (27) Y - LAG SCREW WH 5/16x1 1/2 - H100026 (2) C - NUT BARREL WH 5/16x1 1/2 - H100006 (9) B - NUT BARREL WH 5/16x5/8 - H100004 (15) BE - T-NUT 1/4 - H100072 (82) BG - T-NUT 5/16 - H100074 Parts (4) BM - SCREW PFH 6x3/4 - H100084 Identification Hardware (13) BN - SCREW PFH 8x1 - H100085 (92)BR - SCREW PFH 8x1 1/8 - H100088 (39)BQ - SCREW PFH 8x1 1/4 - H100087 (96) BP - SCREW PFH 8x1 1/2 - H100086 (60) BS - SCREW PFH 8x1 3/4 - H100089 (13)CK - SCREW PFH 8x2 - H100111 (26) BT - SCREW PFH 8x2 1/2 - H100090 (4)AJ - BOLT HEX 5/16x1 1/4 - H100042 (4) AN - BOLT HEX 5/16x2-3/4 - H100047 (13) BA - BOLT PTH 1/4x3/4 - H100063 (17) CH - SCREW TAPPING 14x1-1/2 - H100109 (17)CY - SCREW PWH 8x5/8 - H100128 (11)LC - LAG SCREW WH 1/4x1-1/2 - H100145 (2) KS - NUT BARREL WH 1/4x5/8 - H100136 (2)KY - BOLT WH 1/4x1/2 - H100141 (7) CB - WASHER SAFETY 17x30 - H100103 (16) CD - WASHER FLAT 8x27 - H100105 (11)CE - WASHER FLAT 9x18 - H100106 (24) CG - WASHER LOCK INT 8x15 - H100108 (2) AZ - BOLT PTH 1/4x1 1/4 - H100062 (10) KV - WASHER LOCK EXT 6x15 - H100138 (2) KW - WASHER LOCK EXT 8x15 - H100139 (9) CJ - NUT LOCK 5/16 - H100110 BX - WASHER SPLIT 5/16 - H100095 (4) - T-40 TORX WRENCH - A100041(2) AC - WASHER LOCK EXT 8x19 - H100030 (105)AD - WASHER LOCK EXT 12x19 - H100031 (22) - T-30 TORX WRENCH - H100114(2) - T-30 TORX BIT - H100147(2) - T-40 TORX BIT - A100042(2) Parts Identification Accessories (NOT TO SCALE) (6) FA - QUICK LINK - A100069 (2) GQ - L BRACKET 66x66x127 BLUE - A100153 (1) - 90° L-BRACKET - BLK - A4M00555 (1) HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164 (3) - L BRACKET BLUE 2.5x38x50x55 - A4M00584 (2) - L BRACKET BLUE 32x51 - A4M00646 (2) SB - TRIANGLE PLATE BLUE 100 5 HOLE - A100309 (1) - SWING BEAM EXT. BRACKET BLUE - LEFT - A4M00511 (1) SQ - "A" REVISION TAG - A100314 (1) - SWING BEAM EXT BRACKET BLUE - RIGHT - A4M00512 (4) - CHAIN BLUE 51.25" - A4M00524 (2) - CHAIN BLUE 31" - A4M00525 (8) - GROUND STAKE REBAR - A4M00527 (5) - METAL RUNG 559 BLUE - A4M00585 (1) - SHIPS WHEEL BLUE/LIME - A6P00125 (1) - TELESCOPE BLUE/LIME - A6P00126 Parts Identification Accessories (NOT TO SCALE) (1) - TARP - A6P00123 43 1/4"x93 1/2" (1100x2374) (1) - AWNING - A6P00124 1/64"x32 1/4"x22 1/4" (.4x818x566) (1)- SLIDE BED 8' LIME - A6P00131 (1) GZ - SLIDE RAIL 8' BLUE RIGHT - A100161 (1) HA - SLIDE RAIL 8' BLUE LEFT - A100162 (2) HD - SWING SEAT BLUE - A6P00133 (2) - LIME HC ROCK #1 - A6P00128 (2) - BLUE HC ROCK #2 - A6P00040 (2) - CRANBERRY HC ROCK #1 - A6P00129 (4) - HAND GRIP LIME PLASTIC - A6P00127 (1) - BLUE TRAPEZE - A6P00134 T-NUT (1) E7 - MONKEY BAR RAIL - W4L06938 1 3/8"x3 3/8"x48" (36x86x1219) (1) - L BRACKET BLUE 2.5x38x50x55 - A4M00584 (1) SB - TRIANGLE PLATE BLUE 100 5 HOLE - A100309 MONKEY BAR ASSEMBLY STEP 1 5/16 (1) BOLT 5/16x1 WH (3 PLCS) BOLT WH 5/16x1 1/2 (3) 5/16x1 BOLT WH 1/2 (3 PLCS) (1) LOCK WASHER EXT (3) T-NUT 5/16 8x19 (1) NUT WH 5/16x7/8 BARREL TRIANGLE PLATE BLUE 100 5 HOLE E7 NUT BARREL WH 5/16x7/8 L BRACKET BLUE 2.5x38x50x55 WASHER LOCK EXT 8x19 BOLT WH 5/16x1 - (1) E7 - MONKEY BAR RAIL - W4L06938 1 3/8"x3 3/8"x48" (36x86x1219) (1) L BRACKET BLUE 2.5x38x50x55 - A4M00584 (1) SB - TRIANGLE PLATE BLUE 100 5 HOLE - A100309 MONKEY BAR ASSEMBLY STEP 2 (1) BOLT 5/16x1 WH BOLT WH 5/16x1 1/2 (3 PLCS) (3) 5/16x1 BOLT WH 1/2 T-NUT 5/16 (3 PLCS) (1) LOCK WASHER EXT (3) T-NUT 5/16 8x19 (1) NUT WH 5/16x7/8 BARREL TRIANGLE PLATE BLUE 100 5 HOLE BOLT WH 5/16x1 WASHER LOCK EXT 8x19 L BRACKET BLUE 2.5x38x50x55 NUT BARREL WH 5/16x7/8 E7 E5 (1) - MONKEY BAR UPRIGHT - W4L06964 1 3/8"x3 3/8"x70 3/8" (36x86x1786) (1) - HAND GRIP LIME PLASTIC - A6P00127 MONKEY BAR ASSEMBLY STEP 3 (2) 5/16x1 BOLT WH 1/2 (2) TAPPING SCREW 14x1-1/2 (2) LOCK WASHER 8x15 INT (2) FLAT WASHER 9x18 T-NUT 5/16 (2 PLCS) (2) T-NUT 5/16 HAND GRIP LIME PLASTIC BOLT WH 5/16x1 1/2 (2 PLCS) SCREW TAPPING 14x1-1/2 (2 PLCS) WASHER LOCK INT 8x15 (2 PLCS) WASHER FLAT 9x18 (2 PLCS) E5 E5 (1) - MONKEY BAR UPRIGHT - W4L06964 1 3/8"x3 3/8"x70 3/8" (36x86x1786) (1) - HAND GRIP LIME PLASTIC - A6P00127 MONKEY BAR ASSEMBLY STEP 4 (2) TAPPING SCREW 14x1-1/2 BOLT WH 5/16x1 1/2 (2 PLCS) (2) LOCK WASHER 8x15 INT (2) FLAT WASHER 9x18 (2) T-NUT 5/16 T-NUT 5/16 (2 PLCS) WASHER LOCK INT 8x15 (2 PLCS) SCREW TAPPING 14x1-1/2 (2 PLCS)(2) 5/16x1 BOLT WH 1/2 HAND GRIP LIME PLASTIC WASHER FLAT 9x18 (2 PLCS) - (5)METAL RUNG 559 BLUE - A4M00585 MONKEY BAR ASSEMBLY STEP 5 (10) TAPPING SCREW 14x1-1/2 SCREW TAPPING 14x1-1/2 (10 PLCS) METAL RUNG 559 BLUE (5 PLCS) MONKEY BAR ASSEMBLY STEP 6 BOLT HEX 5/16x2-3/4 (2) LAG SCREW WH 5/16x2 (4) WASHER LOCK EXT 8x19 (8) H81 (2) - MONKEY BAR BRACE - W4L06965 1"x3 3/8"x19 3/8" (24x86x492) (1) M82 - MONKEY BAR GROUND BOARD - W4L06966 5/8"x3 3/8"x40 3/8" (16x86x1026.204) T-NUT 5/16 (2 PLCS)WASHER LOCK EXT 12x19 (4 PLCS) (4) BOLT 5/16x1 WH H81 M82 NUT BARREL WH 5/16x7/8 (4 PLCS) H81 LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) BOLT HEX 5/16x2-3/4 (2 PLCS) WASHER LOCK INT 8x15 (2 PLCS)WASHER FLAT 9x18 (2 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x1 (4 PLCS) WASHER (2) LOCK INT 8x15 (2) FLAT WASHER 9x18 (4) NUT WH 5/16x7/8 BARREL (2) T-NUT 5/16 WASHER LOCK EXT 12x19 (4) H7 (2) - BENCH GROUND BOARD - W4L06967 1"x3 3/8"x18 1/8" (24x86x460) (2) FZ - L BRACKET BLUE 32x51 - A4M00646 BENCH ASSEMBLY STEP 1 BOLT WH 5/16x1/2 (2) NUT WH 5/16x7/8 BARREL (2 PLCS) (2) BOLT 5/16x1/2 WH (2) LOCK WASHER EXT 12x19 NUT BARREL WH 5/16x7/8 (2 PLCS) L BRACKET BLUE 32x51 (2 PLCS) H7 H7 WASHER LOCK EXT 12x19 (2 PLCS) H8 (2) - BENCH UPRIGHT - W4L06968 1"x3 3/8"x11 3/4" (24x86x300) BENCH ASSEMBLY STEP 2 (8) SCREW 8x1 3/4 PFH SCREW PFH 8x1 3/4 (8 PLCS) H8 H8 H9 (2) - BENCH SEAT SUPPORT - W4L06969 1"x3 3/8"x6 1/2" (24x86x166) BENCH ASSEMBLY STEP 3 (8) SCREW 8x1 3/4 PFH FLUSH TO TOP. SCREW PFH 8x1 3/4 (8 PLCS) H9 H9 M12 (2) - BENCH SEAT - W4L06970 5/8"x3 3/8"x26" (16x86x660) BENCH ASSEMBLY STEP 4 (8) SCREW 8x1 3/4 PFH SCREW PFH 8x1 3/4 (8 PLCS) M12 M12 SB74 (1) - SWING BEAM EXTENDED - W4L06961 2"x5 1/4"x89 1/2" (50x134x2274) (1) - SWING BEAM EXT. BRACKET BLUE - LEFT - A4M00511 (1) - SWING BEAM EXT BRACKET BLUE - RIGHT - A4M00512 (2) GQ - L BRACKET 66x66x127 BLUE - A100153 SWING BEAM ASSEMBLY STEP 1 BOLT HEX 5/16x2-3/4 (2) 5/16x2-3/4 BOLT HEX (2 PLCS) WASHER FLAT 8x27 (4 PLCS) (3) 5/16x1 BOLT WH 3/4 NUT LOCK 5/16 (2 PLCS) (3) NUT WH 5/16x7/8 BARREL (4) FLAT WASHER 8x27 (2) NUT 5/16 LOCK SB74 BOLT WH 5/16x1 3/4 (3 PLCS) L BRACKET 66x66x127 BLUE (2 PLCS) NUT BARREL WH 5/16x7/8 (3 PLCS) SWING BEAM EXT. BRACKET BLUE - LEFT SWING BEAM EXT BRACKET BLUE - RIGHT E77 (2)- ANGLE BRACE - W4L06962 1 3/8"x3 3/8"x74 3/8" (36x86x1890) (1) W71 - SWING BEAM SUPPORT - W4L06963 2"x3 3/8"x49 5/8" (50x86x1260) E77 (1) H79 - END SUPPORT - W4L06923 1"x3 1/2"x42" (24x86x1072) SWING BEAM ASSEMBLY STEP 2 BOLT WH 5/16x4 1/2 (3) LOCK WASHER EXT (5) LOCK WASHER EXT WASHER LOCK EXT 8x19 12x19 8x19 WASHER LOCK EXT 12x19 (3) NUT WH 5/16x7/8 BARREL (2) LAG WH 5/16x2 SCREW (1) 5/16x4 BOLT WH 1/2 NUT BARREL WH 5/16x7/8 LAG SCREW WH 5/16x2 (2 PLCS) W71 (2) BOLT 5/16x2 WH E77 H79 WASHER LOCK EXT 8x19 (2 PLCS)WASHER LOCK EXT 8x19 (2 PLCS) NUT BARREL WH 5/16x7/8 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) BOLT WH 5/16x2 (2 PLCS) SWING BEAM BRACKET (STEP 1) SWING BEAM ASSEMBLY STEP 3 W71 SWING BEAM END (STEP 2) (2) 5/16x2 BOLT WH 1/2 (2) 5/16x1 BOLT WH 3/4 (2) WH NUT 5/16x1 BARREL 1/2 (2) NUT WH 5/16x7/8 BARREL (2) LOCK WASHER EXT (2) LOCK WASHER EXT BOLT WH 5/16x1 3/4 8x19 12x19 (2 PLCS)NUT BARREL WH 5/16x7/8 (2 PLCS) BOLT WH 5/16x2 1/2 (2 PLCS) NUT BARREL WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 12x19 WASHER LOCK EXT 8x19 (2 PLCS) (2 PLCS) SWING BEAM ASSEMBLY STEP 4 WASHER SAFETY 17x30 (6) NUT LOCK 5/16 (6) WASHER FLAT 8x27 (6) 9 1/2" SWING HANGER QUICK LINK (6) NUT LOCK 5/16 (6 PLCS)WASHER FLAT 8x27 (6 PLCS) WASHER SAFETY 17x30 (6 PLCS) 9 1/2" SWING HANGER QUICK LINK (6 PLCS) M77 (1) - SLIDE BRACE - W100544 (1) - SLIDE BED 8' LIME - A6P00131 SLIDE ASSEMBLY STEP 1 TOP (3) BOLT WH 5/16x1/2 BOLT WH 5/16x1/2 (3 PLCS) T-NUT 5/16 (3 PLCS) BOTTOM M77 USE 'M77' SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. USE A 7/16" DRILL BIT. TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY. (3) T-NUT 5/16 SLIDE BED 8' LIME HA (1) - SLIDE RAIL 8' BLUE LEFT - A100162 (1) GZ - SLIDE RAIL 8' BLUE RIGHT - A100161 (2) M78 - CENTER SLIDE BRACE - W100545 SLIDE ASSEMBLY NOTE: STEP 2 MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. SLIDE RAIL 8' BLUE RIGHT (24) SCREW 8x2 1/2 PFH M78 SCREW PFH 8x2 1/2 M78 (24 PLCS) SLIDE RAIL 8' BLUE LEFT PRE-DRILL USING 1/8" DRILL BIT. TIP: A HELPER IS REQUIRED FOR THIS PHASE. H1 (1) E2 - UPRIGHT - W4L06891 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) - FLOOR RAIL - W4L06898 1"x3 3/8"x42 1/8" (24x86x1070) (1) E3 - UPRIGHT - W4L06892 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) J1 - WALL RAIL - W4L06900 1"x2 3/8"x40 7/8" (24x60x1038) (1) K3 - GROUND BOARD - W4L06896 5/8"x5 1/4"x42 1/8" (16x134x1070) (1) K4 - GROUND BOARD - W4L06899 5/8"x5 1/4"x61" (16x134x1549) (1) M8 - WALL RAIL - W4L06920 5/8"x3 3/8"x42 1/8" (16x86x1070) STEP 1 E2 M8 NOTE HOLES E3 WASHER LOCK EXT 8x19 (2 PLCS) T-NUT 5/16 (2 PLCS) (6) 5/16x2 BOLT WH 1/4 BOLT WH 5/16x2 (2 PLCS) BOLT WH 5/16x2 1/4 (6 PLCS) WASHER LOCK EXT 8x19 (6 PLCS) NOTE HOLES T-NUT 5/16 (6 PLCS) H1K3 BOLT WH 5/16x2 (8 PLCS) CENTER T-NUTS SHOULD BE PLACED BEFORE MOUNTING J1 K3 BOARD. K4 K3 T-NUT 5/16 (10 PLCS) WASHER LOCK EXT 8x19 (8 PLCS) BOLT WH 5/16x2 (10) WASHER LOCK EXT 8x19 (16) T-NUT 5/16 (18) E4 (1) - UPRIGHT - W2A01970 1 3/8"x3 3/8"x57 3/8" (36x86x2274) (1) E1 - UPRIGHT - W4L06890 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) K3 - GROUND BOARD - W4L06896 5/8"x5 1/4"x42 1/8" (16x134x1070) (1) M8 - WALL RAIL - W4L06920 5/8"x3 3/8"x42 1/8" (16x86x1070) (1) H10 - FLOOR RAIL - W4L07317 1"x3 3/8"x42 1/8" (24x86x1070) (1) G1 - SWING BEAM MOUNT - W4L06945 1"x5 1/4"x40 7/8" (24x134x1038) (1) SQ - "A" REVISION TAG - A100314 (1) K1 - GROUND BOARD - W4L06893 5/8"x5 1/4"x79 7/8" (16x134x2028) (1) M1 - SAFETY BOARD - W4L06895 5/8"x3 3/8"x40 7/8" (16x86x1038) (2) O3 - SAFETY BOARD - W4L06948 5/8"x1 3/8"x40 7/8" (16x34x1038) STEP 2 BOLT WH 5/16x2 1/4 (8 PLCS) WASHER LOCK EXT 8x19 (8) 5/16x2 BOLT WH 1/4 (20 PLCS) T-NUT 5/16 (20 PLCS) (12) BOLT 5/16x2 WH BOLT WH 5/16x2 (9 PLCS) (4) SCREW 8x1 3/4 PFH (2) SCREW 8x5/8 PWH E4 1" SPACING (20) LOCK WASHER EXT (24) T-NUT 5/16 8x19 O3 1"SPACING SCREW PFH 8x1 3/4 (4 PLCS) G1 O3 H10 M8 CENTER T-NUTS SHOULD BE PLACED BEFORE MOUNTING NOTE HOLES. G1 BOARD. E1M1 K3 K1 T-NUT 5/16 (4 PLCS) SCREW PWH 8x5/8 (2 PLCS) "A" REVISION TAG SHOULD BE PLACED ON K3 BOARD NEXT TO E4 BOARD. STEP 3K2 K2 K2 K2 K2 (4)- GROUND BOARD - W4L06894 5/8"x5 1/4"x43 1/4" (16x134x1097) WASHER LOCK EXT 8x19 (16 PLCS) LAG SCREW WH 5/16x1 1/2 (16 PLCS) LAG SCREW WH 5/16x1 1/2 (16) WASHER LOCK EXT 8x19 (16) G2 (2) - SANDBOX SEAT - W4L06433 1"x5 1/4"x14 5/8" (24x134x370) (4) Q2 - SANDBOX SEAT SUPPORT - W4L06434 1"x4 3/8"x8" (24x112x202) STEP 4 (24) SCREW 8x1 1/2 PFH G2 Q2 Q2 SCREW PFH 8x1 1/2 (24 PLCS) (8) SCREW PFH 8x1 3/4 SCREW PFH 8x1 3/4 (8 PLCS) G2 Q2 BENCH SUB ASSEMBLY Q2 G2Q2 Q2 O1 - PICKET - W4L06901 5/8"x1 3/8"x13 1/4" (16x34x336) (7) STEP 5 (14) SCREW 8x1 1/8 PFH SCREW PFH 8x1 1/8 (14 PLCS) FLUSH O1 BOARDS TO TOP OF J1 BOARD. J1 O1 3 1/16" TYPICAL SPACING J2 - SHELF SUPPORT - W4L06903 1"x2 3/8"x2 3/8" (24x60x60) (2) BACK VIEW K5 - SERVING SHELF - W4L06902 5/8"x5 1/4"x40 7/8" (16x134x1038) (1) STEP 6 (8) SCREW PFH 8x1 3/4 SCREW PFH 8x1 3/4 (8 PLCS) K5 J2 J2 J6 (1) - LADDER RAIL - W4L06910 1"x2 3/8"x50 1/8" (24x60x1273) (1) M2 - FLOOR RAIL - W4L06897 5/8"x3 3/8"x43 1/4" (16x86x1097) (1) M5 - FLOOR RAIL - W4L06914 5/8"x3 3/8"x43 1/4" (16x86x1097) STEP 7 LAG SCREW WH 5/16x1 1/2 (3 PLCS) (1) LAG WH 5/16x2 SCREW WASHER LOCK EXT 8x19 (3 PLCS) (2) WH LAG 1/4x1-1/2 SCREW (3) WH LAG 5/16x1 SCREW 1/2 (2) LOCK WASHER 6x15 EXT (4) LOCK WASHER 8x19 EXT NOTE HOLE LOCATIONS CLOSER TO J6 BOARD HOLE M2 LAG SCREW WH 5/16x2 M5 NOTE HOLE LOCATION. LOCATION. J6 WASHER LOCK EXT 8x19 WASHER LOCK EXT 6x15 (2 PLCS) LAG SCREW WH 1/4x1-1/2 (2 PLCS) H2 (4) - DECK BRACE - W4L06909 1"x3 3/8"x18 3/4" (24x86x475) STEP 8 BOLT WH 5/16x1 1/2 (2 PLCS) M2 T-NUT 5/16 WASHER LOCK EXT 8x19 (2 PLCS) (2) 5/16x1 BOLT WH 1/2 (3 PLCS) LAG SCREW WH 1/4x1-1/2 (4 PLCS) (4) WH LAG 1/4x1-1/2 SCREW (4) LOCK WASHER EXT (5) T-NUT 5/16 6x15 (4) LOCK WASHER EXT 8x19 H2 H2(2) 5/16x1 BOLT WH 3/4 WASHER LOCK EXT 6x15 (4 PLCS) T-NUT SHOULD BE PLACED ON M2 BOARD ON THIS STEP. 5 31142113111! 201111901897867564534231 222212019181716151413121110987654321 11 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 SQUARE WHEN PUTTING ON H2 BOARDS. H2 H2 BOLT WH 5/16x1 3/4 (2 PLCS) T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) J3 (1) - ANGLE BRACE - W4L06905 1"x2 3/8"x47 1/4" (24x60x1200) STEP 9 LAG SCREW WH 1/4x1-1/2 WASHER LOCK EXT 6x15 T-NUT 5/16 (2 PLCS) J3 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 (2) BOLT WH 5/16x1 1/2 (2) LAG SCREW WH 1/4x1-1/2 (1) WASHER LOCK EXT 6x15 (1) J9 - SUPPORT BOARD - W4L06064 1"x2 3/8"x3" (24x60x76) (4) STEP 10 (8) SCREW PFH 8x1 3/4 SCREW PFH 8x1 3/4 (8 PLCS) J9 BOARDS ARE FLUSHED WITH THE TOP J9 J9 OF M2 AND M5 BOARDS. M2 M5 J9 J9 H3 - FLOOR SUPPORT - W4L06915 1"x3 3/8"x40 7/8" (24x86x1038) (1) STEP 11 SCREW PFH 8x2 (4) H3 SCREW PFH 8x2 (4 PLCS) J5 (2) - AWNING SUPPORT - W4L06908 1"x2 3/8"x11 3/4" (24x60x298) STEP 12 (2) LAG WH 5/16x2 SCREW (2) LOCK WASHER EXT 8x19 WASHER LOCK EXT 8x19 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) J5 J5 J4 (2) - AWNING BOARD - W4L06906 1"x2 3/8"x14 1/8" (24x60x358) (1) N1 - AWNING BOARD - W4L06907 5/8"x2 3/8"x34 1/8" (16x60x866) STEP 13 (2) LAG WH 5/16x2 SCREW WASHER LOCK EXT 8x19 (2) WH LAG 1/4x1-1/2 SCREW (2 PLCS) LAG SCREW WH 5/16x2 (4) SCREW 8x1 3/4 PFH (2 PLCS) (2) LOCK WASHER EXT 6x15 SCREW PFH 8x1 3/4 (2 PLCS) LAG SCREW WH 1/4x1-1/2 (2 PLCS) (2) LOCK WASHER EXT 8x19 J4 N1 WASHER LOCK EXT 6x15 (2 PLCS) J4 Y1 (1) - FLOOR BOARD - W4L06916 5/8"x4"x40 3/8" (16x102x1024) (10) M6 5/8"x3 - FLOOR 3/8"x45 BOARD 1/8" (16x86x1145) - W4L06918 SCREW PFH 8x1 1/2 (60 PLCS) TOP VIEW NOTE HOLE. (1) Y2 - FLOOR BOARD - W4L06917 5/8"x4"x40 3/8" (16x102x1024) STEP 14 Y1 Y2 M6 (60) SCREW 8x1 1/2 PFH Y2 Y1 J7 (1) K6 - GROUND BOARD - W4L06904 5/8"x5 1/4"x44 1/2" (16x134x1129) (1) - LADDER RAIL - W4L06911 1"x2 3/8"x50 1/8" (24x60x1273) (1) BOLT 5/16x1 WH NUT BARREL WH 1/4x5/8 (2 PLCS) WASHER LOCK EXT 8x15 (2 PLCS) BOLT WH 1/4x1/2 (2 PLCS) (1) - 90° L-BRACKET - BLK - A4M00555 STEP 15 BACK VIEW K6 J7 90° L-BRACKET - BLK WASHER LOCK EXT 8x19 BOLT WH 5/16x1 T-NUT 5/16 (2 PLCS) K6 WASHER LOCK EXT 8x19 (2 PLCS)BOLT WH 5/16x1 1/2 (2 PLCS) J7 BOLT WH 5/16x1 1/2 (2) BOLT WH 1/4x1/2 (2) WASHER LOCK EXT 8x15 (2) NUT BARREL WH 1/4x5/8 (2) WASHER LOCK EXT 8x19 (3) T-NUT 5/16 (2) M7 (2) - WALL RAIL - W4L06919 5/8"x3 3/8"x41 1/2" (16x86x1054) (1) M9 - WALL RAIL - W4L06941 5/8"x3 3/8"x43 1/4" (16x86x1097) STEP 16 (4) BOLT 5/16x2 WH WASHER LOCK EXT 8x19 (2) WH LAG 5/16x1 SCREW 1/2 (2 PLCS) LAG SCREW WH 5/16x1 1/2 (2 PLCS) (6) LOCK WASHER EXT (4) T-NUT 5/16 8x19 BOLT WH 5/16x2 M7 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) T-NUT 5/16 (4 PLCS) M9 M7 O4 (1) - AWNING BOARD - W4L06957 5/8"x1 3/8"x32 1/4" (16x34x818) (1) - AWNING - A6P00124 1/64"x32 1/4"x22 1/4" (.4x818x566) STEP 17 (4) SCREW 8x1 1/8 PFH (4) SCREW 8x5/8 PWH SCREW PFH 8x1 1/8 (4 PLCS) O4 AWNING BACK VIEW O4 SCREW PWH 8x5/8 (4 PLCS) M7 AWNING AWNING O4 BOARD IS FLUSHED WITH THE TOP OF M7 BOARD.O4 BOARD IS CENTERED ON M7 BOARD. M10 (1) - WALL RAIL - W4L06942 5/8"x3 3/8"x43 1/4" (16x86x1097) (1) M11 - ARCHED WALL RAIL - W4L06943 5/8"x3 3/8"x43 1/4" (16x86x1097) STEP 18 (4) WH LAG 5/16x1 SCREW 1/2 T-NUT 5/16 CENTER T-NUTS (2 PLCS) SHOULD BE PLACED BEFORE (4) LOCK WASHER EXT (2) T-NUT 5/16 8x19 MOUNTING M10 BOARD. M11 LAG SCREW WH 5/16x1 1/2 (4 PLCS) M10 WASHER LOCK EXT 8x19 (4 PLCS) J8 (1) - WALL BOARD - W4L06947 1"x2 3/8"x25" (24x60x634) (1) - L BRACKET BLUE 2.5x38x50x55 - A4M00584 STEP 19 BOLT WH 5/16x1 1/2 WASHER LOCK EXT 8x19 (1) LOCK WASHER EXT T-NUT 5/16 NUT BARREL WH 5/16x7/8 L BRACKET BLUE 2.5x38x50x55 LAG SCREW WH 1/4x1-1/2 BOLT WH 5/16x1/2 (1) WH LAG 1/4x1-1/2 SCREW (1) 5/16x1 BOLT WH 1/2 8x19 (1) T-NUT 5/16 (1) NUT WH 5/16x7/8 BARREL (1) LOCK WASHER EXT 12x19 NOTE CENTER HOLES ON J8 BOARD LOCATED CLOSER TO THE DECK. (1) BOLT 5/16x1/2 WH J8 WASHER LOCK EXT 12x19 - (2) HAND GRIP LIME PLASTIC - A6P00127 STEP 20 WASHER LOCK INT 8x15 (2 PLCS) WASHER FLAT 9x18 (2 PLCS) T-NUT 1/4 (2 PLCS) (4) LOCK WASHER INT 8x15 HAND GRIP LIME PLASTIC (2 PLCS) (2) TAPPING SCREW 14x1-1/2 (2) T-NUT 1/4 SCREW TAPPING 14x1-1/2 (2 PLCS) WASHER FLAT 9x18 (2 PLCS) WASHER LOCK INT 8x15 (2 PLCS)(2) BOLT 1/4x1 1/4 PTH (4) FLAT WASHER 9x18 BOLT PTH 1/4x1 1/4 (2 PLCS) STEP 21 3 1/16" TYP SPACING 1 13/16" O2 O2 - PICKET - W4L06944 5/8"x1 3/8"x18 1/4" (16x34x465) (7) SCREW PFH 8x1 1/8 (14) SCREW PFH 8x1 1/8 (14 PLCS) O2 (9) - PICKET - W4L06944 5/8"x1 3/8"x18 1/4" (16x34x465) STEP 22 (18) SCREW 8x1 1/8 PFH SCREW PFH 8x1 1/8 (18 PLCS) 2 13/16" TYP SPACING 1 13/16" O2 O2 (7) - PICKET - W4L06944 5/8"x1 3/8"x18 1/4" (16x34x465) STEP 23 (14) SCREW 8x1 1/8 PFH SCREW PFH 8x1 1/8 (14 PLCS)3 1/16" TYP SPACING. 1 13/16" O2 STEP 24 H4 H5 H4 H5 SCREW PFH 8x2 (8 PLCS) NOTE: H5 PILOT HOLES ARE UPWARD. H4 (2) - HORIZONTAL TARP SUPPORT - W4L06946 1"x3 3/8"x56 1/8" (24x86x1425) (2) H5 - HORIZONTAL TARP SUPPORT - W4L06949 1"x3 3/8"x48 3/4" (24x86x1237) T-NUT 5/16 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS)BOLT WH 5/16x2 1/4 (4 PLCS) BOLT WH 5/16x2 1/4 (4) WASHER LOCK EXT 8x19 (4) T-NUT 5/16 (4) SCREW PFH 8x2 (8) STEP 25 H6 1/2" 5/8" H6 - ROOF BOARD - W4L06950 1"x3 3/8"x40 3/8" (24x86x1025) (4) SCREW PFH 8x1 (8 PLCS) SCREW PFH 8x1 1/2 (8 PLCS) T1 - ROOF BOARD - W4L06951 1"x1 3/8"x48 3/4" (24x34x1237) (1) H6 H6 T1 SCREW PFH 8x1 1/2 (8) SCREW PFH 8x1 (8) H6 STEP 26 J10 - ROOF BOARD - W4L06952 1"x2 3/8"x4" (24x60x102) (2) UNDERNEATH J10 J10 SCREW PFH 8x1 (4) SCREW PFH 8x1 (4 PLCS) N2 (2) - ROOF BOARD - W4L06953 5/8"x2 3/8"x33 1/8" (16x60x840) (2)Y3 - SUNBURST HALF MOON - W4L06954 5/8"x4"x12" (16x102x306) STEP 27 (8) SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/8 (4) SCREW PFH 8x1 1/8 (4 PLCS) SCREW PFH 8x1 1/4 Y3 (8 PLCS) Y3 N2 N2 1 3/16" N3 (2) - SUNBURST BOARD - W4L06955 5/8"x2 3/8"x11 3/4" (16x60x299) (4) N4 - SUNBURST BOARD - W4L06956 5/8"x2 3/8"x8 1/8" (16x60x205) STEP 28 (18) SCREW 8x1 1/8 PFH N3 N4 N4 N4 BACK VIEW SCREW PFH 8x1 1/8 N3 (18 PLCS) N4 H6 H6 N4 N4 N4 BOARDS FLUSHED WITH H6 BOARDS. - TARP - A6P00123 43 1/4"x93 1/2" (1100x2374) (1) STEP 29 (10) SCREW 8x5/8 PWH TARP SCREW PWH 8x5/8 (10 PLCS) STEP 30 M3 M4 LIME HC ROCK #1 CRANBERRY HC ROCK #1 BLUE HC ROCK #2 M3 (6) M4 - LADDER RUNG - W4L06913 5/8"x3 3/8"x20 1/4" (16x86x515) (1)- LADDER RUNG - W4L06912 5/8"x3 3/8"x20 1/4" (16x86x515) (2) - LIME HC ROCK #1 - A6P00128 (2) - BLUE HC ROCK #2 - A6P00040 (2) - CRANBERRY HC ROCK #1 - A6P00129 NOTE: PLACE THE ROCKS AND HARDWARE ONTO THE M4 BOARDS BEFORE PLACING ON J6 AND J7 BOARDS. SCREW PFH 8x1 1/4 (28 PLCS) BOLT PTH 1/4x3/4 (12 PLCS) J7 WASHER LOCK INT 8x15 (12 PLCS) J6 (28) SCREW 8x1 1/4 PFH T-NUT 1/4 (12 PLCS) BOLT PTH 1/4x3/4 (12) WASHER LOCK INT 8x15 (12) T-NUT 1/4 (12) - TELESCOPE BLUE/LIME - A6P00126 (1) STEP 31 (2) SCREW PFH 8x1 1/8 M8 SCREW PFH 8x1 1/8 (2 PLCS) TELESCOPE BLUE/LT.BLUE PLACE TELESCOPE APPROXIMATELY CENTER OF M8 BOARD. STEP 32 BENCH ASSEMBLY BOLT WH 5/16x1/2 (2) BOLT WH 5/16x1/2 (2 PLCS) BENCH ASSEMBLY STEP 33 MONKEY BAR ASSEMBLY MONKEY BAR ASSEMBLY (2) BOLT 5/16x3/4 WH BOLT WH 5/16x3/4 (2 PLCS) STEP 34 WASHER SPLIT 5/16 (4) SWING BEAM ASSEMBLY SWING BEAM ASSEMBLY BOLT HEX 5/16x1 1/4 (4 PLCS) (1) HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164 BYD ID TAG (LARGE) 2011 WITH AGES WASHER SPLIT 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS) 5 1/8" SCREW PFH 6x3/4 (4 PLCS) SCREW PFH 6x3/4 (4) BOLT HEX 5/16x1 1/4 (4) WASHER FLAT 8x27 (4) - SHIPS WHEEL BLUE/LIME - A6P00125 (1) STEP 35 LAG SCREW WH 5/16x3 (1) WASHER FLAT 8x27 (1) SHIPS WHEEL BLUE/LIME WASHER FLAT 8x27 LAG SCREW WH 5/16x3 QUICK LINK (4 PLCS) (4) - CHAIN BLUE 51.25" - A4M00524 (2) - CHAIN BLUE 31" - A4M00525 (2) HD - SWING SEAT BLUE - A6P00133 (6) FA - QUICK LINK - A100069 (1) - BLUE TRAPEZE - A6P00134 STEP 36 CHAIN BLUE 51.25" (4 PLCS) QUICK LINK (2 PLCS) BLUE TRAPEZE SWING SEAT BLUE (2 PLCS) 2 5/8" STEP 37 5" DRILL 3/8" (10mm) HOLES 5" THROUGH FLOOR (3 PLCS) 1"3 11/16" BOLT WH 5/16x1/2 (3 PLCS) T-NUT 5/16 (3 PLCS) SLIDE ASSEMBLY SLIDE ASSEMBLY BOLT WH 5/16x1/2 (3) T-NUT 5/16 (3) «SPANISH (8) - GROUND STAKE REBAR - A4M00527 BOLT WH 5/16x1 1/4 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) NUT BARREL WH 5/16x5/8 (2 PLCS) Anchoring Instructions STEP 38 TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. FINAL STEP DOUBLE CHECK EVERY BOLT, SCREW AND NUT FOR TIGHTNESS. MAKE SURE EVERY BOARD IS SECURE AND MAKE SURE THE PLAY SET IS LEVEL. ENJOY YOUR NEW PLAY SET! (2) 5/16x1 BOLT WH 1/4 (6) BOLT 5/16x1/2 WH USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES. NOTE: FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! (8) LOCK WASHER 12x19 EXT (8) NUT WH 5/16x5/8 BARREL WASHER LOCK EXT 12x19 (2 PLCS) NUT BARREL WH 5/16x5/8 GROUND STAKE REBAR (2 PLCS) (8 PLCS) BOLT WH 5/16x1/2 (2 PLCS)BOLT WH 5/16x1/2 (4 PLCS) NUT BARREL WH 5/16x5/8 (4 PLCS) WASHER LOCK EXT 12x19 (4 PLCS) Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging. This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum life and performance of this product and failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual. This Limited Warranty does not cover: • Labor for any inspection • Labor for replacement of any defective item(s) • Incidental or consequential damages • Cosmetic defects which do not affect performance or integrity of a part or the entire product • Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable Assembly Manual. • Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure • Improper installation including but not limited to installation on uneven, unlevel, or soft ground • Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect performance or integrity Backyard Discovery products have been designed for safety and quality. Any modifications made to the original product could damage the structural integrity of the unit leading to failure and possible injury. Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified products or consequences resulting from failure of a modified product. This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings. Such use may lead to product failure and potential injury. Any and all public use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied. This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you. Pro Rated Part Replacement Schedule Product Age Customer Pays All Parts 0-30 days from date of purchase $0 and free shipping 31 days to 1 year $0 + S&H Wood Rot and Decay Only 1 year $0 and free shipping 2 years 20% + S&H 3 years 40% + S&H 4 years 60% + S&H 5 years 80% + S&H Over 5 years 100% + S&H Rev5/20/10 BRS


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply