ASUS ZENWATCH 2 WI501Q (01) PDF Document

The ASUS ZENWATCH 2 WI501Q has several key components:

1. **Touch screen display panel:** Use this to operate your ZenWatch with gestures.

2. **Loop:** Use the loop to tuck away the excess strap.

3. **Strap:** Allows you to wear the ZenWatch on your wrist. The strap and buckle/clasp may vary by model.

4. **Microphone:** The built-in microphone allows you to operate your ZenWatch using voice commands.

5. **Ventilation hole:** Available on select models for ventilation only. Do not insert foreign objects into this hole.

6. **Spring bar:** Press the pin on this bar to remove the current strap.

7. **Charging connectors:** Align these with the charging cradle to charge the battery.

8. **Power and reset button:** Press this to power your ZenWatch on or off, or to reset it to factory settings.

Your ASUS ZENWATCH 2 WI501Q is compatible with watch straps that have a standard 22 mm or 18 mm spring bar pin.

1. Press the pin on your current strap’s spring bar to detach it from the ZenWatch.

2. Gently pull out the current strap. To attach the new one, refer to your new wrist band’s replacement instructions.

Follow these steps to charge your ASUS ZENWATCH 2 WI501Q:

1. Connect the charging cable to the charging connectors on the watch. The cable is designed to connect in only one orientation.

2. Connect the other end of the charging cable to your power adapter, then connect the power adapter to a nearby power outlet.

Note: If the charging connectors contain sweat, dirt, or other stains, clean them with a dry, nonabrasive, lint-free cloth before charging. The rating input current for the device is +5V 1A, 5W.

To power on your ASUS ZENWATCH 2 WI501Q, press and hold the power and reset button for three (3) seconds.

To power off your ASUS ZENWATCH 2 WI501Q, follow these steps:

1. Press and hold the power and reset button to launch the app list.

2. Swipe upward and tap **Settings**.

3. Swipe upward and tap **Power off**.

4. Tap the checkmark to confirm.

To use your ASUS ZENWATCH 2 WI501Q, you need a compatible phone running Android 4.3+ or iOS 8.2+. Supported features may vary between Android and iOS.

1. Connect your phone to the Internet and log in to a Google account.

2. Launch the Play Store on your phone.

3. Search for “Android Wear” and tap **INSTALL**.

Before pairing, ensure your phone’s Bluetooth is turned on.

1. Connect your phone to the Internet.

2. Power on your ASUS ZENWATCH 2 WI501Q and swipe left. Ensure the watch is connected to a power source.

3. Select a language on your watch that is similar to your phone’s language. For voice actions to work, the phone and watch must use the same language.

4. On the watch, swipe left to prepare for pairing.

5. The watch will prompt you to install Android Wear on your phone. Swipe left again.

6. Check the model name displayed on your ZenWatch. On your phone, open the Android Wear app and select the same model name from the list.

7. A passkey will appear on both your phone and your ZenWatch. Ensure they are the same, then tap **Pair** on your phone.

You can navigate your ASUS ZENWATCH 2 WI501Q using various gestures and actions:

Waking the watch:

– Tap the display panel.

– Or, tilt your wrist to wake up the screen.

Dimming the screen:

– Press your palm on the watch face to dim the display.

Reading cards (notifications, information, etc.):

– **Swipe up** to go to the next card.

– **Swipe down** to go back to the previous card.

– **Swipe left** to see more information about the current card.

– **Swipe right** to close the card or go back to the previous action.

Viewing and launching apps:

– Tap on the watch face or wake the watch, then **swipe left** to see the app list.

– **Swipe up or down** to view the app list, then tap the app you want to launch.

– **Swipe left or right** to switch between the app list, contacts, and voice action screen.

From the main watch face, **swipe down**. This screen allows you to select between **None**, **Priority**, and **All** notifications. You can also view the current battery charge percentage on this screen.

1. Tap and hold the watch face for two (2) seconds to launch the options.

2. Swipe left or right to browse through the available watch faces.

3. Tap a watch face to select it.

You can also use the ASUS ZenWatch Manager app on your phone to create your own custom watch face.

To use voice actions, first wake your ASUS ZENWATCH 2 WI501Q. Then, say **”OK Google”** followed by a voice command from the action list. For example, say “OK Google, take a note.”

The following voice actions are available:

Remind me: Create reminders that sync with your Google account.

Show me my steps: Track your daily number of steps.

Send a text: Send a text message to a saved contact.

Email: Create or read emails received from your paired device.

Agenda: View events scheduled on your paired device’s calendar.

Navigate: Locate specific places and destinations.

Set a timer: Set a countdown timer.

Start stopwatch: Enable the stopwatch feature.

Set an alarm: Set an alarm.

Settings: Configure display, connectivity, and device settings.

Start: Access the bundled apps you can use with your ZenWatch.

This feature allows you to automatically unlock your phone when your paired ASUS ZENWATCH 2 WI501Q is nearby.

To set it up:

1. Launch the ASUS ZenWatch Manager app on your phone and tap **Unlock my phone**.

2. Tap **Setup unlock my phone**.

3. Read the notice and tap **OK**.

4. The app will ask to be a device administrator. Tap **Activate**.

5. Key in your preferred four (4) digit PIN and tap **Next**.

6. Retype the PIN and tap **Next** to finish.

Settings Screen:

After setup, you can access the settings screen to:

– Deactivate or reactivate the feature with a slider.

– Change your PIN code.

– Delete your current PIN.

– Enable or disable vibrating alerts on the watch when the phone is unlocked.

This feature allows you to mute incoming calls or alarms on your phone by covering the watch face.

1. Launch the ASUS ZenWatch Manager app on your phone and tap **Cover to mute**.

2. Tap the checkbox for **Incoming call**, **Clock alarm**, or both.

3. Tap **Apply** to save and exit.

The SOS feature sends a preset emergency message to selected contacts when you activate the SOS app on your watch.

1. Launch the ASUS ZenWatch Manager app on your phone and tap **SOS**.

2. Tap **Select emergency contacts**.

3. On the Preset message screen, you can:

– Tap **+ Add more** to add contacts.

– Tap the **X** next to a contact to delete it.

– Tap the emergency message text to create your own message.

– Tap the checkbox for “Show location in the message” to include your location.

4. Tap **Apply** to save all settings.

If your ASUS ZENWATCH 2 WI501Q is currently paired with your phone, you can use the **Find my watch** feature to make it vibrate. To do this, launch the ASUS ZenWatch Manager app on your phone and tap **Find my watch**.

This feature makes your ASUS ZENWATCH 2 WI501Q vibrate when it becomes disconnected from your paired phone.

1. Launch the ASUS ZenWatch Manager app on your phone and tap **Forgot phone warning**.

2. Move the slide button from **OFF** to **ON**.

The flashlight feature activates the screen of your watch to provide light. This feature can only be used if your watch is currently paired with your phone.

1. Launch the ASUS ZenWatch Manager app on your phone and tap **Flashlight**.

2. Tap **Start Flashlight**.

After downloading the Wellness app to your phone, follow these steps for first-time use:

1. From your paired phone, launch **Wellness**.

2. Read through the setup screens, tapping the arrow icon to proceed.

3. On the “Setup your profile” screen, complete the form with your name, gender, age, height, and weight, then tap the right arrow icon.

4. Read the Terms of Use and select **I agree to Terms of Use**.

5. Tap the check icon to finish the setup process.

1. Launch the ASUS Wellness app on your phone and tap the settings icon.

2. Select **Activity goal**.

3. On the Activity goal screen, you can either input a number of steps in the box or move the slide button to set your targeted daily number of steps.

The Remote Camera app turns your watch into a remote controller for your phone’s camera. After downloading the app, launch it from your phone to start.

On the Remote Camera home screen on your watch, you can perform the following actions:

– **Customize settings:** Tap the gear icon.

– **Zoom:** Slide the zoom bar to zoom in or out.

– **Use timer:** Tap the timer icon to turn the timer on or off.

– **Take photos/videos:** Tap the large central button to take a photo or start/stop recording a video.

– **Switch modes:** Slide the icon near the shutter button to toggle between camera and video functions.

– Your ASUS ZENWATCH 2 WI501Q is water-resistant, not waterproof. Keep it dry and away from liquids. If it gets wet, wipe it immediately with a soft dry cloth.

– Ensure the watch is dry before using it with app features.

– Follow the warning labels for your personal safety.

– Never attempt to short-circuit, disassemble, or reassemble the battery.

– Discontinue use if leakage is found.

– Discontinue use if you experience an allergic reaction to metal components or leather straps and consult a dermatologist.

– The watch and charging cradle must be recycled or disposed of properly.

– Keep any small components away from children.

– Only use the watch in environments with ambient temperatures between 5°C and 40°C.

– The battery may present a risk of fire or chemical burn if removed or disassembled.

– Follow the warning labels for your personal safety.

– There is a risk of explosion if the battery is replaced by an incorrect type.

– Do not dispose of the battery in fire.

– Never attempt to short-circuit the battery.

– Never attempt to disassemble and reassemble the battery.

– Discontinue use if leakage is found.

– The battery and its components must be recycled or disposed of properly.

– Keep the battery and other small components away from children.

For regulatory information, navigate on your watch to **Setting > About > Regulatory information**.